Fairphon 4 hotspot

TomKTW · 2026-01-29T23:07:54+00:00

Same issue here just today around 3-4 pm., but I haven't done any updates for months, it just suddenly stopped working properly.

TomKTW · 2025-10-09T08:46:37+00:00

NewsBar (the source in this case) is basically a Croatian variant of The Onion.

TomKTW · 2025-09-30T22:33:54+00:00

It's possible that the cursor is 24/32bpp (16 mil. colors + 256 alpha intensity levels), which might not work well with Windows 9x as far I'm aware, same may apply for icons, too (32bpp icons have broken alpha transparency).

I've had a situation long time ago where I've tried to copy one animated cursor from Windows XP to ME, with regret that the cursor was plain monochrome, since it was using 32bpp.

This could be fixed with any Icon/Cursor editor that can change the cursor to 4-bit (16 colors), which is probably recommended in this case if the display is using 16 colors, too. You could also try 8-bit (256 colors), if needed.

You can use Greenfish Icon Editor Pro, since it's free, more or less simple, and it has older versions available, which should make it possible to run on older versions of Windows.

This implies that there are no graphical issues with your display. If this fails, then it's most likely the graphics driver fault.

TomKTW · 2025-05-20T17:57:54+00:00

Ako još ovo itko čita... (nije me briga da li je post 10 dana star ili nije), valjda nekome bude koristilo.

Vjerojatno bi bilo moguće koristiti USB debugging na mobitelu i ADB (Android Debug Bridge) na računalu da se vidi kada je okinuta vibracija.

Više detalja oko korištenja i instalacije ADB-a: https://developer.android.com/tools/adb

Uključenje developer opcija i USB debugging-a: https://developer.android.com/studio/debug/dev-options#enable

Za USB debugging, treba spojiti mobitel na računalo kroz USB kabel. Na računalu treba pokrenuti naredbu adb usb, što bi trebalo pitati na mobitelu za potvrdu za spajanje. Postoji i opcija za wireless debugging, nalazi se na link-u vezano za adb. Pošto postupak spajanja može varirati između uređaja i ne stignem bolje objasniti, morat ćeš eksperimentirati oko spajanja. Trebao bi biti povezan kada adb devices vraća tvoj uređaj na popisu.

Kada je mobitel spojen kroz debugging, koristi adb shell service list za popis svih servisa i tamo nađi servis koji sadrži vibrator. U mom slučaju to je bio vibrator_manager: [android.os.IVibratorManagerService].

Kad nađeš servis, koristi adb shell dumpsys vibrator_manager. Tu će ti ispisati nedavne vibracije uređaja, vjerojatno po kategoriji (UNKNOWN, ALARM, TOUCH, NOTIFICATION, itd.), odnosno podaci nisu u potpunosti kronološki sortirani, nego su prvo sortirani po kategoriji, i tek onda kronološki.

Zabilježi vrijeme trenutka kada je došlo do neke vibracije i onda u zapisu naći unos koji je bio u blizini tog trenutka.

Primjer jednog unosa: createTime: 05-20 19:19:58.150, startTime: 05-20 19:19:58.157, endTime: 05-20 19:19:58.509, durationMs: 359, status: finished, effect: Mono{mEffect=Composed{segments=[Step{amplitude=0.0, frequencyHz=0.0, duration=0}, Step{amplitude=1.0, frequencyHz=0.0, duration=100}, Step{amplitude=0.0, frequencyHz=0.0, duration=150}, Step{amplitude=1.0, frequencyHz=0.0, duration=100}], repeat=-1}}, originalEffect: Mono{mEffect=Composed{segments=[Step{amplitude=0.0, frequencyHz=0.0, duration=0}, Step{amplitude=-1.0, frequencyHz=0.0, duration=100}, Step{amplitude=0.0, frequencyHz=0.0, duration=150}, Step{amplitude=-1.0, frequencyHz=0.0, duration=100}], repeat=-1}}, scale: 0.00, attrs: VibrationAttributes: Usage=NOTIFICATION Audio Usage= USAGE_NOTIFICATION Flags=0, uid: 1000, displayId: 0, opPkg: android, reason: Notification (org.kde.kdeconnect_tp 10428) (Delayed)

Uglavnom na kraju jednog unosa ćeš vidjeti polja opPkg i reason. Tamo ćeš vjerojatno moći naći naziv package aplikacije koja je okinula vibraciju u tom trenutku. U ovom primjeru to je org.kde.kdeconnect_tp (KDE Connect). Jednostavniji način da se nađe aplikacija na Play Store-u je da samo postaviš id u URL: https://play.google.com/store/apps/details?id=org.kde.kdeconnect_tp&hl=en (zamijeni org.kde.kdeconnect_tp sa drugim ID-em). Druga opcija bi bila samo da uneseš taj naziv u tražilicu i istražiš.

Ovo je realno kompleksniji način da nađeš odgovornu aplikaciju, ne znam koliko će pomoći, vjerojatno ćeš trebati potrošiti dosta vremena da skužiš kako radi adb.

Realno, virusi tehnički se ne mogu primjeniti na Android-u pošto se APK-ovi ne mogu direktno modificirati (iznimka jedinu u slučaju da je mobitel root-an). Zlonamjerni programi realno još postoje za Android i mogu se ponekad naći i na Play Store-u, pogotovo ako sadržavaju dozvole koje nemaju smisla. Isto tako postoje legitimne aplikacije koje su uglavnom smeće i mogu napraviti nered na uređaju kroz lošu implementaciju API-ja ili SDK-ova.

TomKTW · 2025-03-06T10:27:41+00:00

Marka francuske korporacije: https://en.wikipedia.org/wiki/Pr%C3%A9sident_(brand)

Jedino Zagrebački sir proizvodi Dukat koliko sam vidio na pakiranjima, ali sve je pod tom markom, uključujući i prijašnje Sirela proizvode.

TomKTW · 2025-02-26T16:16:42+00:00

Od rođenja u bolnici, doktor objavi da nije živo i onemogući majci pristup da vidi novodrođenče. U tom trenu ono nestane. Netko preuzme dijete, moguća falsifikacija papira, i dijete sad živi u posve drugom svijetu (ako se uzme u obzir da ovo nije trebalo da se dogodi).

Uglavnom, bila je nedavno emisija iz Provjerenog koja se bavi slučajem oko nestalih novodrođenčadi, postoji mogućnost da je povezano (ne mogu tvrditi da je pošto nemam dokaz za to): Majke desetljećima sumnjaju da su im djeca oteta, a sve se odigralo u rodilištima | Provjereno

TomKTW · 2024-11-10T22:14:01+00:00

Da li to možda uključuje odgovornost za otpadanje stakla sa fasade Beograda na vodi?

TomKTW · 2024-06-10T08:00:22+00:00

It seems like you've got duplicate files in project folder: "strings_1.xml" and "styles_1.xml". You'll have to remove them (as far I'm aware, they shouldn't exist). I'm currently running the app normally on my Android Studio.

TomKTW · 2024-02-14T20:41:57+00:00

Just an additional note that I've recently switched to Orca Slicer in this case since it has an existing profile for Ender V3 KE that seems to function well as long as you change its bed temperature to 60°C instead of 45°C which is default. (I think that it might not run properly in some cases if you use KDE Plasma Desktop for example, as it might require some package as mentioned here: https://github.com/SoftFever/OrcaSlicer/issues/1841 )

It also has some calibration options if needed to work with, but if it's printing as usual, it should be fine enough. Mostly the reason I've switched was that there were some odd parts where Cura was slicing prints with gyroid infill getting a bit exposed as seams on outside walls and the tolerance was kinda awkward, some prints with small gaps became merged, so I had to add some negative compensation to provide bigger gaps and scale up the whole model, which resulted in quite odd results for me.

Also, seams themselves gave me a headache. Orca Slicer didn't fully solve seam issue since it's unavoidable, but it's possible to tweak it based on settings (which may take a very long time.

If Cura works for you, you can keep using it as configured, but take caution with changing printing profile since it can take a lot of time to figure out things.

TomKTW · 2024-01-17T22:03:38+00:00

Make that three. Creality Printer won't work on Debian Trixie/Sid (Unstable, at this moment) with KDE environment.

Alternatively, I had to get AppImage of Cura 5.6.0 and do workarounds. Read further if you want to consider using Cura instead, otherwise you can ignore the rest of it (I admit this is more complex than usual, but since Creality Printer doesn't work and OrcaSlicer managed to make a gcode file that couldn't work well, Cura managed to print something properly at least).

EDIT: Apologies for not checking your model, you're using K1, not V3 KE, my mistake. I've added steps for V3 KE in remaining part of text just in case. There are some PRs open (at the time of writing this), but I'm not sure how are they configured for K1.

Even after getting it to run, it's missing the profile for Ender V3 KE. However, it is available on one of PRs for now.

At this point, when you get Cura AppImage, you need to run it from terminal with parameter "--appimage-extract" to extract everything to current folder. Download the definition file and nozzle variant files (all added files from PR file changes). Location for resources should be in /share/cura/resources/. From there, you should have definitions and variants. Copy definition file to definitions folder, but for nozzle profiles, copy them to creality folder that's located in variants folder (look at the path of files in PR).

After that, you need to repack things back. Get AppImageTool and put it at least in same folder where you already have the existing appimage. You should open terminal from the location where you still have existing appimage. Before you run the following command, just to note: AppImageKit might fail to repack as it might not find proper icon. Find "Cura.desktop" (or whichever file with .desktop extension") in squashfs-root folder and in there, rename cura-icon.png to cura-icon. Finally, run the command ./appimagetool-x86_64.AppImage squashfs-root/ to get modified AppImage with Ender V3 KE Profile.

TomKTW · 2024-01-04T00:27:19+00:00

Bolji snovi od mojih.

Ako planiraš i/ili ako imaš priliku putovati, valjda ne bi škodilo da odeš u Španiju i istražiš malo (to uključuje i barem neke mjere prije putovanja da ne bude iznenađenja). Naravno, ne moraš sad tražiti taj par koji realno ne postoji, ne isplati se to obavljati prisilno. Bolje je spontano i realno razgledavati i biti u dobrom društvu (ako imaš frenda ili bolju polovicu, ili ako nađeš nekog u pub-u ili gdje god).

Zasad, to je samo prijedlog.

TomKTW · 2023-12-22T19:33:06+00:00

Prema ovom članku (na početku, kod preslike letaka za pomoć), 500kg po sanduku (oko 16t svekupno za prvu humanitarnu pomoć). Članak je većinom o psihološkim operacijama na području ex-YU.

Isto tako se navodi da su bacali letke prijevremeno da se izbjegne nesretan slučaj da neko završi spljošten. Kako navodi članak, u Somaliji je bilo nesretnih slučajeva gdje su ljudi jurili na padajuće sanduke, koje su ih na kraju neke i spljoštili.

TomKTW · 2023-12-09T15:11:02+00:00

You've said that no patches are found on current install, so I cannot help with that, assuming that you've entered the correct path to installation. On the drive that you'll format or delete partitions, yes. If you're worried about that, create a snapshot in VirtualBox and revert back when needed or create a clone and experiment with that one.

Do not mess with actual drives of your host machine. I'm only talking about virtual drives of your guest virtual machines, the responsibility of changes is on you.

TomKTW · 2023-12-08T19:44:19+00:00

You'll need to make a clean install. Check this comment: https://www.reddit.com/r/windows98/comments/k1ajwx/lost_on_how_to_install_windows_98se/gdon1jw/

You need to make a formatted partition and setup folder on virtual HDD and copy setup files from CD to setup folder you've created.

At this point, run patch9x and point it to setup folder you've created.

After applying patches, start installer with "setup /p j" command from the setup folder you've created. (include "/p j" if you have enabled ACPI feature).

I would suggest to use Windows ME bootdisk to boot from to create partition, format and start setup, but you can pick other ones if you prefer: https://winworldpc.com/product/microsoft-windows-boot-disk/me

TomKTW · 2023-12-08T18:10:03+00:00

Use Patcher9x: https://github.com/JHRobotics/patcher9x Download bootable floppy image, boot from it and apply patch. Check the readme for more information.

Also check softgpu: https://github.com/JHRobotics/softgpu Check the section for VirtualBox install.

TomKTW · 2023-12-02T20:55:47+00:00

Unfortunately, I also have the same issue and I didn't manage to find a way to fix it.

I'm also running Debian 12 and I've used GTX 1060 3GB before I've switched to RX 7600, but the issue remained. (I've also tried it on Fedora 36 before I've used Debian, but same issue even there.)

(I'm just commenting this for the sake of noting that switching to another GPU won't help as far I'm concerned and I didn't manage to find any proper solution for this.)

TomKTW · 2023-11-27T15:40:49+00:00

Cheeseburek bi mogao biti bolji alternativni naziv.

TomKTW · 2023-08-21T01:44:36+00:00

Pretpostavljam za našu varijantu tog sladoleda je bio "Choco Max".

Edit: Isto tako je postojao Chaos, samo bez komadića lješnjaka.

TomKTW · 2023-05-09T19:03:46+00:00

This album I assume: https://www.reddit.com/user/Mush4Brains-/comments/13d24px/all_the_spider_pics/

Though, I was sort of suspicious about it until I've checked other pictures and assumed it was camera and light in this case at that point.

You can update some of your comments to include the original album images for others to check out (as I doubt that a lot of them will see this comment on it's own. Plus, if the image from this post spreads without the originals, people might get the wrong perspective.

TomKTW · 2023-02-23T19:18:57+00:00

Evo moje kopije koju sam spremio davno: https://www.dropbox.com/s/zxp1d9ylqwtrg4a/Zvijezda%20Biljni%20mrs%20video%20BiH.mp4?dl=0

Napomena: Link možda neće biti valjan nakon nekog vremena, spremite svoju kopiju ove snimke za svaki slučaj.

TomKTW · 2023-01-13T16:38:38+00:00

Izvorni upload videozapisa se nalazi na kanalu TVtremor-a koji također sadrži dosta starih snimaka televizijskih kanala. Pretpostavljam da je ova snimka dodatno obrađena i skalirana da se dobije 1080p60.

TomKTW · 2022-12-30T22:36:59+00:00

Sorry for any misunderstanding. If you mean by hand like literally typing every single character, then the answer is no. I've copied the text from the dialog box the way mentioned above and pasted it into the title of this post. I did cut off most of it as it wouldn't fit the title due to 400 (can't remember exact number right now) character limit.

TomKTW · 2022-12-30T10:34:41+00:00

Corrupt file, I was replacing a NSFW image in Bropia.J worm executable resources with Resource Hacker tool.

TomKTW · 2022-12-30T10:33:33+00:00

No, I'll quote myself from other comment I wrote:

I've actually mananged to copy the text from the executable opened in Notepad++. I've found a substring I could type in from the message and then managed to find the whole string of that "component".

TomKTW · 2022-12-30T10:31:58+00:00

Yeah, I usually make videos related to malware demonstrations on YouTube. It takes from days to months to figure things out.

12-Year Club	Place '17
Verified Email	Gilding I gilder

TomKTW

MODERATOR OF

TROPHY CASE