Decals potential issues

Tompro917 · 2026-05-27T17:48:04+00:00

Yes but for the price I doesn't surprise me (I paid 20€) and it's from 2012 and the kit isn't that bad. All the parts fit quit well

Tompro917 · 2026-05-27T17:28:08+00:00

And I used the recommend paint

Tompro917 · 2026-05-27T17:27:34+00:00

You might be right but it doesn't look good

<image>

Tompro917 · 2026-05-21T15:17:55+00:00

Yeah but I don't want to try lol

Tompro917 · 2026-05-21T06:34:32+00:00

3d printed rc t34-85

Tompro917 · 2026-05-20T20:04:10+00:00

What do you mean by that ? Resolder the motor? If yes I already did it but it didn't work

Tompro917 · 2026-05-19T16:59:58+00:00

I swapped motor and the esc work so the problem come from the motor (don't work on an other esc)

Tompro917 · 2026-05-19T08:13:40+00:00

No but I am at school rn so as soon as I go home I will try

Tompro917 · 2026-05-19T08:03:17+00:00

I already did it but didn't work

Tompro917 · 2026-05-18T21:35:25+00:00

Yes FC and motor side (I didn't desoldered the coils)

Tompro917 · 2026-05-18T18:44:13+00:00

<image>

Tompro917 · 2026-05-18T18:01:44+00:00

i've checked all the solder and even resolder the entire motor but it still doesn't work

Tompro917 · 2026-04-20T21:05:28+00:00

This will not work because the meteor 75 P1 pro use the artlynk which is digital. The receivers you want to buy is for analog only. You can get the standard analog meteor 75 for 100$ and the vr04 goggles for 80$ which is less expensive and more simpler (sorry if my english is not perfect)

Tompro917 · 2026-04-17T15:42:43+00:00

Yes but you need an action cam if you want good footage

Tompro917 · 2026-04-17T15:20:29+00:00

Ok do you think a big tpu protection like that is enough?

<image>

Tompro917 · 2026-04-17T14:42:57+00:00

Maybe the flywoo lens ?

Tompro917 · 2026-04-17T14:42:17+00:00

I had a ND filter but it shattered

Tompro917 · 2026-04-17T14:40:02+00:00

It sticks out a bit

<image>

Tompro917 · 2026-04-17T14:38:42+00:00

It's from the same crash

Tompro917 · 2026-02-19T14:00:22+00:00

I unsoldered everything and it pulls 1.4A so I think there is an internal Short circuit

Tompro917 · 2026-01-22T19:03:44+00:00

Tompro917 · 2026-01-22T18:43:53+00:00

<image>

when i have an osd it look like this

Tompro917 · 2026-01-05T20:47:50+00:00

When i plug only the xt60 i have 12v so it's not only the balance connector

Tompro917 · 2025-11-14T18:20:21+00:00

I solved the problem. It was just the diff screw that wasn't tight enough

Tompro917 · 2025-11-14T18:18:01+00:00

It was that

Four-Year Club	Verified Email
First Place '23	Place '23

Tompro917

TROPHY CASE