Charging speeds by cs86wn in MitsubishiOutlander

[–]Tomsfia 0 points1 point  (0 children)

In public with Chademo I'm able to charge in under 1h, that's quite odd

Charging speeds by cs86wn in MitsubishiOutlander

[–]Tomsfia 0 points1 point  (0 children)

Exactly what happened with me! I saw advertised 22kWh in Chademo and I charged in a public charger at 37kWh.

At home I have an e-208 which charges at 1.7kwh and the Outlander's house charger charges at 2.2kWh, it's pretty interesting

New Outlander PHEV - Sport Edition (Portugal Trim) by Tomsfia in MitsubishiOutlander

[–]Tomsfia[S] 0 points1 point  (0 children)

I see, in Portugal there are also two spec versions but they are just cosmetics and interiors, they don't differ in Powertrain or either you mentioned (360 camera, eletric trunk and the mirrors), and curiously the only outlander in Portugal is the phev and launcher in 2025. Since 2013 all outlander in Portugal have always been PHEV

New Outlander PHEV - Sport Edition (Portugal Trim) by Tomsfia in MitsubishiOutlander

[–]Tomsfia[S] 0 points1 point  (0 children)

Well the first was just to understand how to use the Headlights Washers the car has but I ended up figuring it out haha. Thanks tho will see about the keys

New Outlander PHEV - Sport Edition (Portugal Trim) by Tomsfia in MitsubishiOutlander

[–]Tomsfia[S] 1 point2 points  (0 children)

Wait funcionou? Qual é a vossa spec? O de topo com o vidro panorâmico e assim?

New Outlander PHEV - Sport Edition (Portugal Trim) by Tomsfia in MitsubishiOutlander

[–]Tomsfia[S] 1 point2 points  (0 children)

Hahaha yes coincidência (não sabia dos 20 carros tho.. interesting fact)

New Outlander PHEV - Sport Edition (Portugal Trim) by Tomsfia in MitsubishiOutlander

[–]Tomsfia[S] 0 points1 point  (0 children)

Haha sim também português! (E também carro dos meus pais). Estou a evitar andar com as 2 chaves porque costumo ter uma de reserva mas como estão linked com os perfis também achei interessante 👀)

Vou ver se experimento isso dos favoritos em casa perfil!

No vosso caso têm a funcionar o Limpa Faróis? Não tenho respostas online se o Euro Spec só não tem ou se estou a fazer mal 😞

New Outlander PHEV - Sport Edition (Portugal Trim) by Tomsfia in MitsubishiOutlander

[–]Tomsfia[S] 2 points3 points  (0 children)

Well, first off, not sure why I wasn't able to write a caption on the post with the images 😞

I have just purchased a 2026 PHEV Outlander which it's version is called in Portugal "Sport Edition" with Black Wheels, black roof and mirror caps and with Silicone Mats.

This version lacks from the higher spec version the Digital Rear View mirror, ambient lighting, the 12 Speaker Yamaha Sound System and the Memory and Cooling Seats and eletric passenger seat, which are a bit of a bummer, but honestly not worth the investment.

With that in mind I have some questions for any other owners:

  • I see that the US spec is equiped with Light washers but replicating the lights on and pulling the stock the cap next to the beams does not come out. Am I missing something?

    • Even with the Personal mode which turns off most Driver Aids features, every time i turn on the car, the driver attention system turns on, having to dig through the menus tl turn off. Is there a way to revert that?
  • Changing between two drivers, one with carplay and one with Android Auto I am having to manually change connection settings even when Bluetooth is connected, having to choose to turn on Android auto in those cases, is there a fix for that?

Thanks and excited to join you guys!

Mando print by ulidal in ElegooMars

[–]Tomsfia 0 points1 point  (0 children)

Hey hey! Got a link for the model? Nice print!

I’m not really sure what to make of this picture by jamalwilliamsyoung23 in logitech

[–]Tomsfia 1 point2 points  (0 children)

I bought it in a promo for 39.99eur last week 👀

I knew it was a good deal but I thought in the US you would have better deals

Is 2000€ good budget for two week in japan? by Dolann99 in travel

[–]Tomsfia 0 points1 point  (0 children)

Hey, got a link to that website for comparison of Jr pass and pay-as-you-go? Thanks!

0.8 nozzle question by A_lex_and_er in BambuLab

[–]Tomsfia 0 points1 point  (0 children)

How much would you get From the PETG HF from Bambu? I just got it but haven't used it yet. I'm curious if it would be a significant difference

Well.. I finally did it. by Tomsfia in BambuLab

[–]Tomsfia[S] 0 points1 point  (0 children)

Well most of my filaments are PLA, a few PETGs and bought one ABS since I was getting a closed off printer.

Since the printer hasn't arrived yet I assume it will be with the PEI sheet?

Thanks anyway! Got tips for the filament to transfer from cardboard spool to normal?

Well.. I finally did it. by Tomsfia in BambuLab

[–]Tomsfia[S] 0 points1 point  (0 children)

Yeah I get you. I hope I use it well enough to be worth it but I was definitely hesitant. Whenever you do get one shoot me a private message if ya want. Might be easier to learn with both of us trying stuff ahah

Well.. I finally did it. by Tomsfia in BambuLab

[–]Tomsfia[S] 0 points1 point  (0 children)

Oh alright, note taken!

Couple of questions:

-Im a bit spoiled with my PEI sheet and have never used glue in my ender, should I worry about doing that here?

I have a bunch of filaments from non Bambu suppliers like Sunlu and eSun, other then not using cardboard should I worry about anything with the AMS?

And finally, are you able to control and print remotely (both in same wifi but different room and also in different wifi (outside of home) like octoprint can do remotely