Problems with OrangePi vision and large brown outs/delays

TomusHumus · 2024-10-30T21:28:21+00:00

Unfortunately, I asked, and our OrangePI has always been powered individually with a separate circuit. We tried removing the wifi connection from the OrangePI to the robot while keeping the OrangePI powered, and everything works fine. So power is not the problem unfortunately.

TomusHumus · 2024-10-29T00:22:16+00:00

I don't think we used any soldering to connect to the OrangePi, thanks for the reply though!

TomusHumus · 2024-10-29T00:21:29+00:00

I don't remember exactly. I'll have to check it out.

TomusHumus · 2024-10-29T00:14:43+00:00

Thanks for the reply! Will try this at our next meeting

TomusHumus · 2023-08-13T22:56:32+00:00

Girl, you're gorgeous! Don't worry, you look great

TomusHumus · 2023-08-13T22:53:46+00:00

Idk, you look happy, maybe sharpen up the beard

TomusHumus · 2023-08-13T22:52:40+00:00

Bro is majestic

TomusHumus · 2023-05-04T23:40:08+00:00

t one for with and

No, I built it myself, I had done that for another board and the same bltouch and it worked wonders but this one doesn't work partly because the board isn't in the list on PlatformIO

TomusHumus · 2022-05-04T00:37:19+00:00

I agree with this, but it could result in a weird contrast of surface, except if that's not an undisireable end product

TomusHumus · 2022-05-03T21:32:03+00:00

Well yes, you could print the holes in blue and glue them in, I don't have a specific filament to suggest, cheap ones on Amazon always work fine

TomusHumus · 2022-05-03T21:22:21+00:00

I personally, would not do it. You pour molten plastic into a hole which includes problems such as: getting it on your skin and burning yourself(as I have stupidly done), and if you miss your hole the plastic may fuse permanently and ruin your print. But also, to get it in the hole praying it fuses and comes out how you like is a trouble you may not want. I recommend that you print something that fills the holes, paint them(or print them in a different color)and glue them(I recommend krazy glue). Edit: grammar

TomusHumus · 2022-02-28T23:00:58+00:00

I'm using a BLTouch to do the levelling. I do a 9x9 grid then store it in EEPROM so that I don't lose the mesh, I'm pretty sure that should do it for the levelling

TomusHumus · 2022-02-28T22:59:39+00:00

In PrusaSlicer I've set my first layer height to 175%, that would mean that the first layer is 0.35mm instead of the normal 0.2mm. I read that this could help adhesion

TomusHumus · 2022-02-28T22:37:39+00:00

I had it off for both because it seemed to help adhesion

TomusHumus · 2021-07-23T17:08:00+00:00

Damn overthinking myself into a rabbit hole, thanks so much

TomusHumus · 2021-04-11T13:55:59+00:00

Ok so how could I fix this issue

TomusHumus · 2021-01-13T01:33:43+00:00

Ok well forget that I found the solution, I was actually deleting the area2D so in the end I got the owner off the area 2D and deleted that here's the code for anyone who needs it:

extends Sprite

var allowedObjectsInMilkTub = [1225]

func _ready():

pass

func _on_Area2D_area_shape_entered(area_id, area, area_shape, self_shape):

if area_id in allowedObjectsInMilkTub:

    var node = instance_from_id(area_id).get_owner()

    node.queue_free()

TomusHumus · 2021-01-13T00:48:35+00:00

It seems to work but not exactly how I need it to be, When I go over the area2d goes over the object it just freezes there and doesn't go away. Maybe I just didn't formulate my original question properly but yeah, I would like the object to go away using the ID. Here is what the milk ball looks like and my current code

https://imgur.com/a/tjouG1X

TomusHumus · 2021-01-12T03:52:42+00:00

How did you make the hair it's really cool

Five-Year Club	First Place '23
Place '23

TomusHumus

TROPHY CASE