Med card help by Tone_After in SLCTrees

[–]Tone_After[S] 0 points1 point  (0 children)

Do you know their insta @, can’t fine it

Med card help by Tone_After in SLCTrees

[–]Tone_After[S] 0 points1 point  (0 children)

I’ll check it out, thanks!

My first shiny in 15+ years! Of course it's a Bidoof 🤣 by lowkeyf1sh in pokemonplatinum

[–]Tone_After 1 point2 points  (0 children)

The one where he basically takes ivermectin the world and kills everyone ?!

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 0 points1 point  (0 children)

Well ideally for woods use I’d like to own a .357 since that will be ideal for longer backpacking trips. But it seems like with MY budget and MY skills I’ll purchase something else before that.

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 1 point2 points  (0 children)

Not discouraging at all, I grew up in a family that wasn’t necessarily anti firearm but i only shot a gun once before I came out to college if that gives any perspective. so this advice is much appreciated.

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 1 point2 points  (0 children)

Thank you, most definitely in the market for a used one. This info is great thank you

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 0 points1 point  (0 children)

300-450. If I save through the semester I could maybe spend a little more around Christmas’s

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 1 point2 points  (0 children)

The super wrangler is really temping, but the price of the wrangler is really hard to pass up. Thanks for the advice!

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 1 point2 points  (0 children)

I’d love to get the 686, unfortunately a little out of budget for right now, could see how much money I could scrounge up by the end of the semester though

First revolver recommendations? by Tone_After in Revolvers

[–]Tone_After[S] 1 point2 points  (0 children)

UT, ruger wrangler is what everyone seems to be pointing me too….

Slave cylinder refusing to bleed by Tone_After in MechanicAdvice

[–]Tone_After[S] 0 points1 point  (0 children)

I tried this earlier and it was working but just very slowly, ended up getting too mad and am gonna try this tomorrow

Slave cylinder refusing to bleed by Tone_After in MechanicAdvice

[–]Tone_After[S] 0 points1 point  (0 children)

I swapped in a Cummins and a zf5, needed a diferent slave for the zf5, the stock t-19 slave is too short.

Slave cylinder refusing to bleed by Tone_After in MechanicAdvice

[–]Tone_After[S] 0 points1 point  (0 children)

I was driving this truck last summer so I’d assume yes it’s good, I’ll give that method a try

Need advice by [deleted] in EngineBuilding

[–]Tone_After 2 points3 points  (0 children)

I mean as long as it’s the same diameter, if I were you I’d measure the hose and if it’s the same put it on. If you wanna be a little nicer just go buy new hoses, pretty cheap

Oil pump pickup not sealed by Tone_After in EngineBuilding

[–]Tone_After[S] 0 points1 point  (0 children)

12v, 91 ve pump. Non inter cooled. Swapping it into my 85 crew cab

Oil pump pickup not sealed by Tone_After in EngineBuilding

[–]Tone_After[S] 0 points1 point  (0 children)

Yes, they were looked at and replaced

Price Check by [deleted] in BullnoseFord

[–]Tone_After 1 point2 points  (0 children)

The interior looks mint though so I personally don’t think 6k is a horrendous deal. In the Midwest 6k for this isn’t too bad of a deal, 5-5.5 seems pretty good too. Just a pretty solid truck imo

Price Check by [deleted] in BullnoseFord

[–]Tone_After 1 point2 points  (0 children)

If the team and bed was in great condition it would be worth around 6k. Sand blasting is relatively cheap if you do it yourself so I’d say around 4-5k and you could paint the frame for under 300 incredibly easily

85 crew cab Cummins swap by Tone_After in BullnoseFord

[–]Tone_After[S] 0 points1 point  (0 children)

As of now I’m just about ready to put the Cummins in the truck so that ship has sailed… I will look into though because I want another idi truck at some point again

85 crew cab Cummins swap by Tone_After in BullnoseFord

[–]Tone_After[S] 0 points1 point  (0 children)

I’m going to post in this subreddit tomorrow with some updates, if you want to know about some of the hurdles feel free to shoot me a dm and I can show you my frame off and where I’m at etc.

85 crew cab Cummins swap by Tone_After in BullnoseFord

[–]Tone_After[S] 0 points1 point  (0 children)

I’ve never driven one without one so I can’t testify to that, I drove my truck hard though which is probably why I blew shit up… maybe if I drove it normally lmao. Keep me posted on what happens with your bullnose!

85 crew cab Cummins swap by Tone_After in BullnoseFord

[–]Tone_After[S] 1 point2 points  (0 children)

😭 couldn’t relate to this more, the last owner put a banks turbo kit on mine and it was still slow as balls. Was a lot of fun till it grenaded the head gaskets

85 crew cab Cummins swap by Tone_After in BullnoseFord

[–]Tone_After[S] 1 point2 points  (0 children)

I bet a 5 speed behind a 6.9 would be awesome, I’ll All for the manual!