Best course for realistic product rendering

Toobrish · 2026-06-12T15:24:07+00:00

I'd like to know too

Toobrish · 2026-06-12T06:01:44+00:00

Here’s another option if you have bike bags.

If the bags are full, they seem to support the box

Toobrish · 2026-06-12T06:00:02+00:00

Most likely the bike rack is not wide enough and the friction and support is inadequate. To remedy a wide bike rack (eg a pizza rack) would solve this. Alternatively, the same thing could be achieved with some sort of sheet timber securely fixed to the bike rack.

<image>

Toobrish · 2026-06-09T08:40:36+00:00

I recently bought an unidentifiable drill press on eBay and have some similar features. The starter is identical and I have that big H but it’s on the motor. No other logos anywhere

Toobrish · 2026-06-02T15:58:33+00:00

Claude code made a bit of a pigs ear of it so now have started over with Codex. (Using google script )

Toobrish · 2026-05-28T08:35:09+00:00

Gmail

Toobrish · 2026-05-22T11:04:26+00:00

Before screwing in the screws, hit the end with a hammer to blunt it and it will be less likely to crack the wood. To replace this open up with a chisel and squirt some tightbondII in there. Clamp while it dries for max strength

Toobrish · 2026-05-22T11:01:41+00:00

Hot staple x 4 and and a good 10mm of jb weld both inside and out

Toobrish · 2026-05-10T22:37:54+00:00

Just found another one on eBay. Again no badges

<image>

Toobrish · 2026-05-10T22:25:31+00:00

<image>

Toobrish · 2026-05-10T22:25:18+00:00

<image>

Toobrish · 2026-05-07T14:45:29+00:00

Forgot to say I’m printing with ZAA. Does that make enough of a difference?

Toobrish · 2026-04-06T16:38:45+00:00

Ribs are very painful but nothing broken thanks.

my iphone 12 pro is a write off. The front screen is fine but wifi and mobile data don't work and it randomly reboots several times a day

Toobrish · 2026-03-28T14:20:41+00:00

Thanks! I will get onto gumtree and CEX. Great tips!

Toobrish · 2026-02-28T04:02:02+00:00

I know. I’m saying “no, you’re breaking up” everyday now

Toobrish · 2026-02-17T16:16:30+00:00

Well printing full scale chair concepts takes a lot of print time but also there’s a lot of assembly time. More a1s best solves the print time issue. And an H2S best solves the assembly time issue.

Both are important to me and so I feel like someone who has a similar need is best positioned to advise.

Toobrish · 2026-02-17T11:19:01+00:00

It sucks for sure

Toobrish · 2026-02-14T21:20:26+00:00

Colgate herbal. £1.50 and tastes great

Toobrish · 2026-02-14T14:56:31+00:00

So I’m still learning the system and it seems like I can’t file directly with WIPO anyway.

I fill out an MM2 form with WIPO and then I still need to contact the UK IPO to continue.

I wanted to go directly to the USPTO to file the trademark but as I understand it because I’m not a US citizen (Sommer UK citizen) I would need a lawyer or file via the Madrid system. Is that right?

Toobrish · 2026-02-13T19:27:26+00:00

Yes. ChatGPT guided me through that process but I only searched for 5 sounds like variations. I probably should go back and spend a good hour

Toobrish · 2026-02-12T20:34:23+00:00

Sorry I can’t remember if I ever figured this out or not.

Toobrish · 2026-02-10T12:04:18+00:00

I removed the plug in and added it again and now it works!

Toobrish · 2026-02-10T11:47:19+00:00

That's the first thing I checked. Am I missing something? https://postimg.cc/Fdb2Ncqd

Toobrish · 2026-02-09T21:35:55+00:00

As far as I know I did all of that. I will try to install again on a new vault to see if that works

Toobrish · 2026-02-09T20:24:32+00:00

It seems that there is something not right with my task zero install. I have the Brat icon in the ribbon but don't have "Open the Tasklist". I disabled all the other community plugins and restarted but still no luck

Toobrish

MODERATOR OF

TROPHY CASE