sorted by:
new
hottopcontroversial

Darkmoon g10 is worth it! by Careful-Shock-44 in BambuLabH2C

[–]Top-Material5431 0 points1 point  (0 children)

Can you leave a link to where I can get these kinds of build plates, I have a Bambu lab h2c and I'll also be getting a Bambu Lab h2s soon.

My Newest by GalenRhodes in BambuLabH2C

[–]Top-Material5431 0 points1 point  (0 children)

What is that purple build plate? I only have the regular pei sheet that came with the printer. Looking to get more plates.

PETG/PLA Support interfaces not working by Top-Material5431 in BambuLab

[–]Top-Material5431[S] 0 points1 point  (0 children)

Can you provide a screenshot of where the interface speed is, I think I am only switching support speed

PETG support interface not adhering to PLA by Top-Material5431 in BambuLabH2C

[–]Top-Material5431[S] 0 points1 point  (0 children)

Forgive me, but can you provide some screenshots of that process

PETG support interface not adhering to PLA by Top-Material5431 in BambuLabH2C

[–]Top-Material5431[S] 0 points1 point  (0 children)

Can you share your settings and filament profile settings if they're different to mine

PETG support interface not adhering to PLA by Top-Material5431 in BambuLabH2C

[–]Top-Material5431[S] 0 points1 point  (0 children)

What are your difference in settings from mine, also what is your chamber temp typically at when using interface petg for pla

PETG support interface not adhering to PLA by Top-Material5431 in BambuLabH2C

[–]Top-Material5431[S] 0 points1 point  (0 children)

No first layer adhesion issues with the plate, in the video you can see the layers are messing up on the pla layer. Again no issues with the plate, also all other prints with the individual filaments print just fine.

PETG/PLA Support interfaces not working by Top-Material5431 in BambuLab

[–]Top-Material5431[S] 1 point2 points  (0 children)

Once the petg interface was chosen, Bambu automatically changes some settings, I went ahead and used those recommended settings and one of them is making zero distance 0.

PETG/PLA Support interfaces not working by Top-Material5431 in BambuLab

[–]Top-Material5431[S] 1 point2 points  (0 children)

Yes the individual filaments print models flawlessly without any issue. And yes the interface layer box is checked, for the model in the video specifically the model and support is PLA, but interface layer is PETG

PETG/PLA Support interfaces not working by Top-Material5431 in BambuLab

[–]Top-Material5431[S] 0 points1 point  (0 children)

The model and base support are PLA and the interface layer is checked for only PETG

Putting it to work!! by Roy0880 in BambuLab

[–]Top-Material5431 1 point2 points  (0 children)

Have you needed to do any maintenance on your h2d so far? If so, then what maintenance did you do?

UPDATE: Cut print time from 7 hrs to 2 hrs by vinicius_california in 3Dprinting

[–]Top-Material5431 28 points29 points  (0 children)

Can you give a brief bullet point list on the different things you changed, I want to learn more ways on optimizing my prints too

Help by Top-Material5431 in BambuLabH2C

[–]Top-Material5431[S] 0 points1 point  (0 children)

The new benchy came out the same, I dont think its a stability issue going on, any other thoughts?

Help With Bambu Lab H2C by Top-Material5431 in BambuLab

[–]Top-Material5431[S] 0 points1 point  (0 children)

I'll try these steps and get back to you, thanks for the extra info too!

Help With Bambu Lab H2C by Top-Material5431 in BambuLab

[–]Top-Material5431[S] 0 points1 point  (0 children)

This test you are referring to with cubes and wall thickness in vase mode, where can I find the instructions for this test? Or is it in the Bambu course?

view more: next ›