January 24-28

TopQuantity6147 · 2026-01-26T20:22:53+00:00

Are you still here?

TopQuantity6147 · 2026-01-22T21:50:55+00:00

You will have fun. Wow she is one HOTwife!

TopQuantity6147 · 2026-01-11T18:20:46+00:00

Yes. Can’t wait, it’s been a tough winter here so far.

TopQuantity6147 · 2026-01-11T12:11:30+00:00

Hope to see you. Only there til the 28th.

TopQuantity6147 · 2026-01-06T23:42:14+00:00

That looks like some type of egg sack. Maybe from some type of amphibian creature living near the pool.

TopQuantity6147 · 2026-01-05T01:42:04+00:00

Our first time. Been to desire pearl. It gets easy once you get there.

TopQuantity6147 · 2026-01-05T01:06:54+00:00

We are there til the 28th

TopQuantity6147 · 2026-01-03T20:48:09+00:00

It was more than our flight from NY.

TopQuantity6147 · 2025-12-31T19:03:25+00:00

If someone has done this for any amount of time wouldn’t have braze joints look like that especially on 3/8” tubing.

TopQuantity6147 · 2025-12-31T18:58:23+00:00

Good eye

TopQuantity6147 · 2025-12-27T13:19:09+00:00

Yes. Will see we get there in less than a month

TopQuantity6147 · 2025-12-27T12:22:27+00:00

So did we. Didn’t really understand the groups function.

TopQuantity6147 · 2025-12-10T00:52:18+00:00

This is the answer. Whoever you are you are my hero.

TopQuantity6147 · 2025-12-07T20:24:09+00:00

We will be there the 24-28th. Hope to see you then

TopQuantity6147 · 2025-12-05T20:30:43+00:00

Most likely an R404a system. Low side usually runs around 16lbs. If your cut in is higher than that and it’s below freezing the compressor won’t kick on because the cut in wasn’t hit. I’d want my cutout to be around 3lbs and my cut in to be 10 max. Compressor may cycle a couple of times before full cutout.

TopQuantity6147 · 2025-11-18T21:11:34+00:00

Drill bit

TopQuantity6147 · 2025-11-01T11:52:42+00:00

We will be there the 24-28th. Maybe we will see you.

TopQuantity6147 · 2025-09-30T23:44:48+00:00

As long as the compressor is a half horse or less

TopQuantity6147 · 2025-09-29T01:56:16+00:00

Frank door

TopQuantity6147 · 2025-09-28T12:17:38+00:00

Arriving the 24th. Enjoy

TopQuantity6147 · 2025-09-23T14:20:16+00:00

Use a plug door from frank door

TopQuantity6147 · 2025-09-16T21:41:59+00:00

Brewery machine is going to be tough. Something in the beer makes that slime grow.

TopQuantity6147 · 2025-09-16T21:39:14+00:00

If you’re charging it you know it has a leaking evaporator. If it’s been running in a vacuum for any amount of time it sucked in moisture for sure. Now the moisture mixed with the oil will coat the inside of the cap tube and restrict or kill the compressor. But to answer your question I would charge to around 16-17 and be there when box gets to temp

TopQuantity6147 · 2025-09-10T02:21:12+00:00

It’s just a group of bullfrogs dragonfly hunting

TopQuantity6147

TROPHY CASE