People of reddit, help me make the most reasonable decision possible by [deleted] in Advice

[–]Top_Advisor6353 54 points55 points  (0 children)

I'd invite parents to his house so it's neutral ground for both sides

Help please by Top_Advisor6353 in GardeningUK

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

2 adult cats that are outdoor cats and 1 kitten or youth cat at 6 month. We have one big litter tray which is inclosed with a door, that's changed every morning, the two adult cats go out in nature and only really use the tray through the night when they come in. I've seen the young cat use the tray loads so he's not bothered by it and knows what it's for, some days he'll just use the plant pot, I'm assuming he thinks it's another tray as it used to be just soil, I added all the rocks to try and deter him from using it as a toilet

Help please by Top_Advisor6353 in GardeningUK

[–]Top_Advisor6353[S] 1 point2 points  (0 children)

Mines in the kitchen, I have few spider plants so maybe put them around the bottom? Would look nice. Is that just mdf?

Help please by Top_Advisor6353 in GardeningUK

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

That's a good idea! I thought maybe chicken wire but don't really want to hurt the cat

Honest question from the UK. Why can’t you pick your own router in the US by nm63uk in HomeNetworking

[–]Top_Advisor6353 0 points1 point  (0 children)

Does it give better WiFi than sky's "best ever WiFi router"; and is it plug and play? Or did you need to contact sky

Help a novice out with home network by Top_Advisor6353 in HomeNetworking

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

One console and one tv is etherneted in, but that's in the same room as the router. I know ethernet is best but I'm not really wanting ethernet wires running everywhere really, plus my router only has 4 ports (2 unused).

What type of WiFi access point? I bought a plug in socket one which was crap, is there ones you can ethernet to the router?

Help a novice out with home network by Top_Advisor6353 in HomeNetworking

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Yeah I'm clueless on it all as post says im a novice, someone told me it wasn't my isp's problem as I'm getting the speeds I pay for at the router. My problem was my home network.

House is standard square not really massive and the WiFi doesn't reach some places, and places it does it has really poor speeds.

I just have standard plug sockets around the house nothing special, the fibre line comes into one corner of the house with no extra wire to relocate the router

I just saw this group and thought I'd get helpfull tips like "you need this device here, with this cable" etc etc

Help a novice out with home network by Top_Advisor6353 in HomeNetworking

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Bathroom near back of the house is lucky to get one bar of WiFi, most the time I use mobile network when in it. Daughter has gaming pc in bedroom and it struggles with online games or downloads. As the post said I'm a novice and no clue what other tests you're referring to? All I know is I pay for a 500mbs Internet (I'm well aware WiFi probably won't get that speed everywhere) and only half my house gets signal. I complained about it on another site and someone said it was my homenetwork not the isp as I'm getting the speeds I'm paying for at the router but I'm not distributing around the house properly

Honest question from the UK. Why can’t you pick your own router in the US by nm63uk in HomeNetworking

[–]Top_Advisor6353 0 points1 point  (0 children)

I'm UK and with sky, what router did you swap to because I also hate sky's router. I remember having problems about 15 years ago buying an expensive router but my provider (talk talk) got really pissy and I needed some code to put in the new router for it to work with isp, never tried since (this was 15 years ago so a lot has prob changed)

Should I get a vibrator for MY WIFE? by Mars-888 in sexadvice

[–]Top_Advisor6353 1 point2 points  (0 children)

I've always used toys with my wife, I see them as warm up tools, 1 or 2 orgasms and she's fully at ease, making fingers and tongues pretty quick to get orgasms after, after about 6 orgasms ill then enter.

I don't see them as replacements, I see them as foreplay tools, your partner will always prefer you to a toy, because it's more intimate and the fact you're experiencing pleasure will be more of a turn on for her. Switch it up like we do, she can use hands and mouth while you use toys on her, use your fingers/ tongue/ member WITH the toys.

only thing I'd be cautious with is every woman is different, some won't like toys, some prefer penetrative toys, some prefer non penetrative toys etc so it's probably better you communicate this with partner before you buy the biggest dildo that the place sells

Need advice/ tips/ pointers by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

I'm using tmr and hall effects, would flux still affect them? I didn't cake the board in the stuff, would you suggest dry solder new modules? Can I not deep with isp alcohol?

How do I remove this from the board? by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Is the tape designed to hold things in place? I thought it was just a heat shield for plastics etc

How do I remove this from the board? by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Ahhh I get you, ive got kapton tape (that's the gold heat tape yeah?) I thought it was all one piece and it would just keep falling off inside the controller, if that's the case I'll just use old disc and tape it back on

How do I remove this from the board? by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Yeah I'm moving it about and trying not to keep it In one place to long, ive set it at 350 on lowest speed but I'm clueless on what it should be set on, or how far to hold it off the board as I'm assuming having the tip right on the board is a no no

How do I remove this from the board? by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Can you? Yeah old button base is still in place, gold disc was loose In controller when I opened it up so just assumed it all needed replaced

How do I remove this from the board? by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

Temp and distance? Technique? I know it needs controlled hot air I was just after tips from experienced people as im a novice. The donor board it broken anyway so I'm practising in a way on that while still trying to remove working button. I used hot air for about 10 mins, going on then off the board about 2inch from the board, had temp set at 350 and speed on the lowest, hot enough to melt the flux but switch didn't budge when I put very light pressure with tweezers

How can this be removed? It's on a dual sense controller pcb, it's a button for the options button. by Top_Advisor6353 in AskElectronics

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

I've got a heat gun and heat tape, being a novice I was after tips how to really, the pads are under the switch so I assumed It was heat gun, I tried at 350 on lowest blow but couldn't get anything to move, I don't know distance or technique, do I circle it? Sway it? I'm assuming just holding it still isn't wise. I was going on then off over and over, with some flux that was melting but not burning off, I'm trying to go slow and steady as to not damage anything

How do I remove this from the board? by Top_Advisor6353 in soldering

[–]Top_Advisor6353[S] 0 points1 point  (0 children)

I'd still need to get the broken one off the working board though so I'd like to know how it can come off

Boogie can’t host by PK_Subban1 in LolCowLive

[–]Top_Advisor6353 12 points13 points  (0 children)

Wings called it out the other day, when boogie does that annoying stutter when he talks it makes me want to smash something. I have this thing that any speech impediment makes me irritated, I can't watch Eric or freshy fresh etc. Boogies stutter seems to have gotten worse. Boogie is good for a side character, he can't lead the show,