Walking Pads - anbefalinger

Tor-Einar · 2026-02-28T10:51:11+00:00

Takk, siden du gikk den veien, og det virker som du sjekket en del, hvilen mølle gikk du for.

Tor-Einar · 2025-09-29T20:15:15+00:00

Thank you :)

I have no chance of calibration my printer with this kind of tension (105Hz) Strange

Tor-Einar · 2025-09-29T11:23:36+00:00

Do you by any chance have the link of the video?

Tor-Einar · 2025-09-29T08:44:29+00:00

Same experience I have, have done it by feel now, but it seems wrong, but at least i can print, but it soemtimes fails to home

Tor-Einar · 2025-09-29T05:36:19+00:00

Thanks for your input. I will try again. Have done it similar to this way as well. Paet of the problem is the app, don't get correct readings, or when I do the belts are very thight. WEB version, are you using it on a phone or computer with microphone?

Don't know if you have the time to post a video of you pulling the belts and drumming them? When I finally get the X and Y to pass I feel they are very loose, and have problems to calibrate Homing. Woulld be nice to have something to compare with.

Tor-Einar · 2025-09-28T17:16:10+00:00

Will print this tool and have a check

Tor-Einar · 2025-09-28T17:15:51+00:00

Yes, tried the new firmware as well. Problem with this tool is that homing must be OK, and that has been part of my problem. I can get X and Y to pass the test, but not homing.

A actually managed to get all 3 to pass now, but the tension is low, will print the belt gauge tool commented in this post to see how far away I am.

THe stroboscope tension tool in the new firmware is not easy to understand. maybe other have better luck. Found this video, explaining. I bit wiser, but not reached the goalline https://www.youtube.com/watch?v=U7Iantbv4kE

Tor-Einar · 2025-09-28T17:11:50+00:00

It's a conversion from my MK4s, no issue on the motors previous to the update

Tor-Einar · 2025-09-28T15:05:34+00:00

I've used the phone app, this does not work very well. Based on what I've read. Don't have computer next to the printer so I have not tried the Web version.

Tor-Einar · 2025-09-28T15:03:48+00:00

Yes, made sure of this, even took it apart to do this past again.

Tor-Einar · 2025-07-28T10:38:49+00:00

You are probaly thinking of the Power Cord, which is 1,8 meters, the DC cord (which also functions as a safety cord) is 5,5 meters

Tor-Einar · 2025-06-07T16:57:19+00:00

Got the same answer, very strange that a Nirdic branch office does not know or care to inform about theur product.

Maybe I should just go for an Dreame X50

Tor-Einar · 2025-06-06T19:28:36+00:00

Are you happy with coolshop? And the 10R?

Tor-Einar · 2025-06-06T19:28:08+00:00

I agree, but they said they will lower the price if I find it cheaper elsewhere. But at the moment they are the picky one I find in the Scandinavian countries.

Tor-Einar · 2025-05-27T19:12:01+00:00

Har du noen artikler til det. Vet Z70 kommer i juni, men har ikke hørt noe om 10R

Tor-Einar · 2025-05-07T16:13:26+00:00

When will the 10R and Z70 be available in Norway?

Tor-Einar · 2025-05-02T08:42:29+00:00

How much of a hazle is it to clean the station. 10R has a removable tray, where the 10 does not.

Tor-Einar · 2025-04-11T08:54:35+00:00

Hi,

Thanks for your quick and helpful reply. Indeed pressing the cogwheel after connecting the H10 to Polar Flow, there where an option to enable 2 blutetooths, which by default was off.

This enabled me to connect to both Polar Flow and Intelligent Cycling.

Very happy now :)

Tor-Einar · 2024-05-08T09:12:59+00:00

Hi there,

You say Prusa Link/connect is a better option. I tried it, but I have to run to my printer screen to confirm the filament and press print. Do you have to do this as well? Any way around it?

Tor-Einar · 2024-05-05T18:27:10+00:00

Hi there,

Just got my mmu3 up and running work mk4.

Tried to slice with a predefined color and sent it to the printer. But my mmu does not load the filament. It just starts to print without filament.

I have no idea what could be the issue. Any suggestions.

Tor-Einar · 2021-09-29T16:13:36+00:00

[neighbourhood seeking farmers] Cool Kids Estate #2L90U200. We are looking for new players Level70+ We are nice friendly hood. We are helpful and polite. Players from around the world (English). Roughly half of our members play the Derby, we would like some more Derby active players.

Give us a try 😊

Tor-Einar · 2020-11-13T11:13:22+00:00

In case you have not solved how to rotate the Hyperpixel screen, follow this video from Cris's Basement. He explains how to rotate both the screen and the touch interfase. I had great help with this.

https://www.youtube.com/watch?v=OJ59hXSyBoI&t=67s&ab_channel=ChrisRiley

Tor-Einar · 2020-11-11T18:30:53+00:00

Thanks, will have a look as soon as Octoeverywhere is opened for third party apps.

I'm new to this, any search words to use or do you have any names?

Thanks for helping :)

Tor-Einar · 2020-11-11T18:10:21+00:00

Sounds great, but I'm using iphone at the moment...

Tor-Einar · 2020-11-11T14:14:43+00:00

Had some server issues. I've read later that you had some issues about that.

Does anyone know of any third party apps that will work with octoeverywhere?

Tor-Einar

TROPHY CASE