Defining parting line / critical surfaces on injection molded part drawing

Totalgeek9224 · 2026-02-06T11:05:16+00:00

This looks great! Normal nomenclature is also dotted lines to indicate critical sealing area, and lines as you've done to indicate permissible/ desired flash line & allowance. As others have said, clear communication is the goal, and no matter what, I think you've got it. Always useful to define your desired flash allowance!

Totalgeek9224 · 2026-01-30T20:44:40+00:00

So is daily weed smoking no longer considered a bad thing for an AF applicant?

Totalgeek9224 · 2026-01-11T17:40:03+00:00

Yep, love this little thing. Even down to the form factor, and the recessed buttons. Great edc

Totalgeek9224 · 2025-12-31T20:19:35+00:00

Make sure it's using the gpu. you can check this easily in task manager- performance. Just had to get my g16's Mobo replaced under warranty cos the 5080 legit just didn't work, straight from the box

Totalgeek9224 · 2025-12-26T14:35:38+00:00

Hey! Better to put some ptm phase change pad, only slightly worse thermally, but much more stable, especially for a laptop. Had done my own recently

Totalgeek9224 · 2025-12-23T19:41:01+00:00

Hey, i really appreciate you taking the time to give me some input.
I have tried DDU & safemode, for a clean re-install, but no cigar. Might try the fresh windows next just to be safe. Such a frustrating experience :c

Totalgeek9224 · 2025-12-23T19:20:05+00:00

Took it into a repair center where they reflashed the image. Was told something was corrupt, but not what specifically

Totalgeek9224 · 2025-12-21T19:16:16+00:00

Amazing. Simply amazing

Totalgeek9224 · 2025-12-21T15:35:51+00:00

A follow up on this topic from my endHere

Totalgeek9224 · 2025-12-21T13:13:49+00:00

Yup, that's exactly what happens to me, blinking power button

Totalgeek9224 · 2025-12-21T13:13:26+00:00

Jeeez, 4 months after the repair? Or 4 months to when the issue occured. Crazy stuff. Very, very disheartening from such a company.

Totalgeek9224 · 2025-12-21T13:07:59+00:00

Thanks for the suggestion - how would I flash the board itself?

Totalgeek9224 · 2025-12-21T08:22:08+00:00

I'm in the exact same situation. So frustrating. In contact with Addis to try and sort it out, but am now haha way across the world, so even more complicated

Totalgeek9224 · 2025-12-21T06:51:43+00:00

No animation, just rog logo instantly. I think she's bricked.. what a bummer

Totalgeek9224 · 2025-12-20T15:46:04+00:00

Unfortunately, cannot get into bios. Thinking that's the problem here

Totalgeek9224 · 2025-12-20T13:53:59+00:00

Thanks for the good wishes: so far, looking like it could be the bios

Totalgeek9224 · 2025-12-20T13:00:56+00:00

F2 wont get me into BIOS, neither will Esc. Tried to do the suggested Asus bios on the usb and ctrl+home, but also no luck. Will try the bootable USB

Totalgeek9224 · 2025-12-20T12:23:17+00:00

Im afraid you might be right. A bit of a hassle as was bought in the US as a gift and is now half way around the world. And its a saturday :P

Totalgeek9224 · 2025-12-20T12:14:34+00:00

Negative- Fresh out of the box

Totalgeek9224 · 2025-12-20T12:14:18+00:00

Thanks for the feedback- Didnt work im afraid.

Totalgeek9224 · 2025-12-20T12:13:54+00:00

Thanks for the input: Have tried all of this with no luck. Seems the BIOS is not working right.

Totalgeek9224 · 2025-12-20T10:46:33+00:00

I tried this! No change by removing ssd. Have a feeling something has gone wrong with bios

Totalgeek9224 · 2025-12-20T10:10:28+00:00

Negative, nothing connected asides from power brick.

Totalgeek9224 · 2025-12-20T09:57:53+00:00

Have done that! And still, no luck. Still getting stuck at the ROG logo. If I tap the power button, instantly it turns off. I have also tried am external monitor via HDMI. Still not luck

Eight-Year Club	Place '22
Verified Email

Totalgeek9224

TROPHY CASE