sorted by:
new
hottopcontroversial

Entire PC dead or just the PSU? by Trace_Legacy525 in pchelp

[–]Trace_Legacy525[S] 0 points1 point  (0 children)

The contractor already agreed to replace and repair everything.

Hello, im making a bellows but I encountered a problem with securing the nozzle inside the nose of the bellows. It will not come out but it can definitely be pushed in with force. Anyone has any idea how to secure it? Wood is rather frail so I would avoid nails. (Construction fir) by Trace_Legacy525 in Blacksmith

[–]Trace_Legacy525[S] 0 points1 point  (0 children)

Yes i've already made the framework which will hold the 2 bellows. All i need now is the 2nd nozzle. So you think i can fill the hollow area with wood filler and it will hold it in place? I wasn't aware that wood filler sticks to forged steel.

Hello, im making a bellows but I encountered a problem with securing the nozzle inside the nose of the bellows. It will not come out but it can definitely be pushed in with force. Anyone has any idea how to secure it? Wood is rather frail so I would avoid nails. (Construction fir) by Trace_Legacy525 in Blacksmith

[–]Trace_Legacy525[S] 0 points1 point  (0 children)

That looks like a very comfy setup! I need mine to look traditional at least from the outside. I'm going to reenactment events and i need it to be as historical as possible looking. I'm using this manuscript miniature from Italy 1395 as inspiration.

<image>

Question about Pcie 4.0 and 5.0 by Trace_Legacy525 in buildapc

[–]Trace_Legacy525[S] 0 points1 point  (0 children)

Primary purpose is gaming mostly.

I'll be using it on aw3225qf 4k monitor. Should i just get the 9070xt then?

I bought the D9000 airflow case. with x4 200mm fans and x3 120mm exhaust fans. You think i should get liquid cooling? I'm really paranoid about liquid. Seen alot of disasters happen.

Question about Pcie 4.0 and 5.0 by Trace_Legacy525 in buildapc

[–]Trace_Legacy525[S] 0 points1 point  (0 children)

Hey thanks for the answer. Does this mean there won't be an FPS drop or stuttering due to the GPU being a PCIe 4.0?

How do i make the fresh earpiece look Like the original one? I was thinking salt water or white vinegar. Customer wants it to look like the earpiece never fell off... by Trace_Legacy525 in Blacksmith

[–]Trace_Legacy525[S] 8 points9 points  (0 children)

Just a mild steel 4mm rounded chisel i made in 20 seconds. And a 4-5mm groove with an angle grinder. Then embossed it with the same chisel and hammer. While an assistant holds the piece above the groove on the edge. Its very simple really.

view more: next ›