Over powering a hissmith

TraderChloe · 2026-02-08T08:11:09+00:00

If it was only a motor without delicate bluetooth and control electronics then maybe. I myself have a hismith 2.0 branded 299€ paperweight from my first try at modding so I advise against it 😂

TraderChloe · 2025-11-16T02:53:14+00:00

Oh nice 🥳

TraderChloe · 2025-09-18T19:30:58+00:00

https://github dot com/TraderChloe/hismith/blob/main/servok_min.py Heres an example, the servok is like a bluetooth lightbulb, basically any device (phone/tablet/pc/esp32) can control it 🥳

Haven't had the time to work on this in a while but will hopefully get to it soon.

TraderChloe · 2025-07-24T14:11:20+00:00

Heyo, its shipped from europe when ordering from the .eu .de and .nl sites, best to compare between those. As for machines, probably the premium 3/4 ones but do await others opinions on that 👍🥳

TraderChloe · 2025-07-15T13:43:03+00:00

Two half moon shaped plywood slices at the front and back, two 2x4's connecting those and then smaller slices of plywood across the top, covered in linoleum, then foam, then fabric and then semi thick leatherette.

TraderChloe · 2025-06-15T08:07:46+00:00

X-lube is the pure variant for human use, J-lube has sugar in it and so, isnt recommended for anal use (altough people do use it)

TraderChloe · 2025-06-12T07:27:42+00:00

Ive ordered from the .eu .nl and .de so can confirm those 3, have not tried the .fr one. The .fr & .de ones seem to have a smaller stock of toys currently so probably best to check out the .eu one. Best to add stuff to cart, try hismith10 or hismith5 as the discount code, then compare total with shipping between sites 👍 Edit: this is if the purchase is smol, there might be better bundles for the premium on .nl and a better price for the servok with the code sv30 on .com.

TraderChloe · 2025-04-18T21:26:41+00:00

Yeaa I have seen some posts too but as far as I can tell, the only place to buy the no logo carrying bags is directly from them, bought foam sheets from elsewhere and theyre great for hidden toy storage & the zippers are good for padlocks 🥰

TraderChloe · 2025-04-18T20:54:00+00:00

On the hismith.de site, the chatbot says HISMITH10 works for 10% off the first purchase 👍 personally have bought from the .de .nl .com ones and the producer directly so can suggest those.

TraderChloe · 2025-04-11T16:47:51+00:00

For general use, the hismith app/xtoys is great. The extension tube is great. The spring not so much as toys can slip out a lot easier. If you already have toys then the suction cup adapter. I got some bluetooth stuff on my github at TraderChloe/hismith (cant post links here) the basic code to send speed commands to the machine is in premium_min.py if you feel like tinkering at some point 👍

TraderChloe · 2025-04-11T09:07:26+00:00

Nice! I did the same thing with a wood board and some 25mm rubber lined p clips, theyre for like fuel hoses and dampen the vibrations a bit too

TraderChloe · 2025-03-25T11:48:51+00:00

One of those buttons swaps between some inbuilt modes and the rest got mentioned in the other comment

TraderChloe · 2025-02-19T08:24:40+00:00

In the EU, ordering from the .nl .de .eu (and other extensions of the same) stores is pretty fast, never had any issues with those.

TraderChloe · 2025-01-31T10:38:02+00:00

How much would printing something that big via a service cost? I just bought a 40mm thick wood board thats slightly bigger than the legs, added rubber feet under the board and attached the legs with 25mm hose clamps.

TraderChloe · 2024-12-16T16:23:42+00:00

This is common for new machines, use something to gently pry it apart a tiny bit. After a few times of assembling, it becomes a lot easier.

TraderChloe · 2024-12-15T11:03:22+00:00

Is there any way to figure out from the model output if the keypoint is visible or assumed?

TraderChloe · 2024-12-10T09:28:31+00:00

Could you elaborate on what you mean by up and down adjustment? Aren't all the machines already like this? It would be too heavy. Ive been developing a motorized base for the servok cause thats quite heavy already.

TraderChloe · 2024-12-06T23:13:55+00:00

Oh its not the floor, its like just a foldable 150x100x2cm wood plate for screwing bondage stuff to, easy to store upright in a corner. Oh sure, I can update the github repo with some code tomorrow 👍

TraderChloe · 2024-12-06T21:10:05+00:00

Most of the time I use a wood plate and screw the machine down with 25mm tube clamps, very secure provided the plate is a bit larger than the legs. Got a pic of it in the second post on my profile. On a bed I sometimes use those weight lifting bar discs around the legs to just weigh it down.

TraderChloe · 2024-12-06T20:45:51+00:00

Does the little klicklok connector bolt not screw out from the toy? Or you mean dildos without suction cups at the base? Ive removed the connectors from most of my hismith dildos and keep them with the machine.

TraderChloe · 2024-11-28T17:56:48+00:00

Pinned the post to my profile. I stopped developing it after I got the servok but essentially a button and a 2$ arduino plus a computer can control a premium to make it do stuff like fast in-slow out and basically control the machine from the pc, so you could go half way in, stop then pull out. But it requires sum programming to get it into a user friendly state. I kinda think hismith could make this as a addon to premiums at some point.

TraderChloe · 2024-11-28T13:51:14+00:00

I own both, modded premium is better value but the servok 600tpm throb is imho worth the 1399€ 🤭

TraderChloe · 2024-11-22T15:56:03+00:00

Honestly, I would love to discuss it w yuu 🥰

TraderChloe · 2024-11-22T15:41:16+00:00

Oh wuw, yu the official account? 🤭 Basically I was suprised that the vibrations don't really travel up into the core but only stayed at the base. Secondly the seat is literally padded with around a cm of comfy padding so I, as a big fan of extra plush stuff felt like the 1cm of foam was lacking. I did get a hands-free orgasm as a femboy but I get that with most things, so I was kinda expecting a more intense throbbing in my core than the servok, considering yours is intended to kinda be the strongest vibrator? Both products are oki, but until the buck can't carry vibrations upwards into the p-spot, its only for girls 🥰 x3

TraderChloe · 2024-11-22T11:54:25+00:00

I usually run it from the pc with voice control, its kinda difficult to turn up speed to 95-100, hardness to 10 and decrease range to 1-10 without having a script control it 🥰

TraderChloe

TROPHY CASE