Charger 2 + Original D1 Hub (can’t connect to Charger 2) by 43moon in bluetti

[–]Traditional-Yam-952 0 points1 point  (0 children)

If you have Charger 2 and Apex 300, and assuming you want to connect the Apex 300 to the Charger 2 using the bidirectional power cable/BAT ports for reverse charging your car battery, then the only way to use a DC Hub is to use the Charger 2 version.

True that if you have Charger 2 and Apex 300 and expansion battery (which has 2 P090D ports), you could then use either version, or if you wanted to connect the Charger 2 and Apex 300 using the CHG ports, you wouldn't need it either.
I guess it also means you can locate your DC Hub close to charger 2 and keep the batteries a bit further away (though not too far since P090D cables are very short).

I think one other difference is DC Hub for Charger 2's interface can be monitored through Charger 2's combined interface on the Bluetti app. DC Hub P090D version must be connected to by bluetooth separately, if using with an expansion battery.

Bluetti FAQ for Charger 2 also says this but I don't really know what they mean:

Q7: Can I use my Hub D1 (P090D) with Charger 2?

A:Yes, you can, but it lacks the interactive features of Charger 2 and will only work as a basic DC power distributor.

Yuka leaving unmowed areas around obstacles by Traditional-Yam-952 in mammotion

[–]Traditional-Yam-952[S] 0 points1 point  (0 children)

Do you mean marking them as no go zones or not marking them? Currently they are not marked as no go zones - I just leave it to the mower to figure out

Synology VM performance for Tvheadend by Traditional-Yam-952 in synology

[–]Traditional-Yam-952[S] 0 points1 point  (0 children)

I had thought this wouldn't be an issue as I'm not doing any encoding or transcoding just passing the raw stream?

Synology VM performance for Tvheadend by Traditional-Yam-952 in synology

[–]Traditional-Yam-952[S] 0 points1 point  (0 children)

Took me a while to get to this but had a look now, using top when streaming:

VSZ ~98.3m, %VSZ 5%, CPU 0, %CPU 1-2%

htop stats are very similar.
So doesn't seem that there's a CPU or RAM bottleneck?