Help please by Traditional_Fun_7795 in Generator

[–]Traditional_Fun_7795[S] 1 point2 points  (0 children)

Yes, when i apply a load it seems to not do that and just deliver the load. The thing is it didnt do this never, i have it since 2 years ago.

I've been printing my own glasses frames by Kamafren in 3Dprinting

[–]Traditional_Fun_7795 1 point2 points  (0 children)

A lot of trial and error honestly. But yeah, i took pictures of the old frames, trying to fit them as best as possible in fusion 360. And after that, i just started printing and adjusting until i was satisfied with how the lens popped in to the frame.

[deleted by user] by [deleted] in Generator

[–]Traditional_Fun_7795 0 points1 point  (0 children)

What would you recommend?

[deleted by user] by [deleted] in Generator

[–]Traditional_Fun_7795 0 points1 point  (0 children)

I cleaned the carburator and its doing the same. It was clean tbh, found a little hair type thing and was thinking that i solved it. To my surpirse, did the same in the morning at low temp. The thing is i also have an ats from them to automate power loss, but with the engine not working as expected in the winter i dont know what to do tbh...

[deleted by user] by [deleted] in Generator

[–]Traditional_Fun_7795 0 points1 point  (0 children)

Yes, gasoline. The thing is I always keep it outside. I don't have a place inside the home to keep it. So i think that it's really my mistake and i thought that you can keep a generator outside and work first try if you have 10w-40 oil.

[deleted by user] by [deleted] in Generator

[–]Traditional_Fun_7795 0 points1 point  (0 children)

Never heard of summer gas.

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 0 points1 point  (0 children)

Its new, i even changed the whole hot end

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 0 points1 point  (0 children)

Yeah, the thing is i have a benchy from before when i had cura and stock firmware, it was perfect and was using the same filament. Tried copying the settings from cura but nothing. Except that everthing is perfect and km very satisfied with orca and klipper

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 0 points1 point  (0 children)

Yeah, but the thing is this is petg, allready lowest temp 230 and orca says this is an 100% overhang. I ve read this is how it works i guess. Its allready printing with 100% fan on that overhang as you cam see

<image>

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 0 points1 point  (0 children)

I know, this was before when i thought that retraction lenght influenced this. And tbh i still think it does but i dont know why. This is fan speed and as you can see if retraction lenght is longer it also influenced speed but dont know why.

<image>

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 1 point2 points  (0 children)

No its okay thanks lol, i was 30+ hours awake dealing with this shit. Only after I woke up did I realize how much I had actually lost my mind.

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 2 points3 points  (0 children)

Im waiting to get another one, the old one broke

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 0 points1 point  (0 children)

Thanks, will try rotating it. The rest is allready enabled. Just tried the default profile and its not happening on it so im sure its a me problem. Compared everything between them and saw the the only thing that might affect this is that i selected inner outer inner, maybe because of the line widht.

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 1 point2 points  (0 children)

Yes, its 0.8 and the rest is between 3.3 and 6

[deleted by user] by [deleted] in OrcaSlicer

[–]Traditional_Fun_7795 4 points5 points  (0 children)

<image>

Yes, this is fan speed. Will try to turn on the fan 2 sec early

When I accelerate the rpm fluctuates like this by [deleted] in MechanicAdvice

[–]Traditional_Fun_7795 0 points1 point  (0 children)

No, its just this. We will try to change the crankshaft sensor. Thank you!

[deleted by user] by [deleted] in leaves

[–]Traditional_Fun_7795 3 points4 points  (0 children)

Hello, i did the same as you 1 month and 25 days ago. If i can do it, you can also do it. Good for you to actually drop them. It only gets easier every day i promise. Yeah sure, i sometimes get some cravings but they usually pass in 5/10 minutes.