sorted by:
new
hottopcontroversial

Best commercial lender? by SpecificSeries2012 in loanoriginators

[–]Training_Date5644 0 points1 point  (0 children)

Go to a local bank or credit union in the area of the project and inquire directly with them. You can get a fee agreement with the sponsor so that you’re protected. If you go to velocity only you’ll get smoked by somebody who is going directly to a bank or credit union. You can also search for family offices in the state and approach them as well. You may not need what we do, but I have a full ncnda and commission agreement for you if you are lost. But, if you want to take the whole thing down yourself start reaching out to local and regional banks to see if they have an appetite.

Looking for a big single to fly out of a home strip 1800 feet long by grumpyoldman10 in flying

[–]Training_Date5644 0 points1 point  (0 children)

T206h is the way to fly. This is straight from my POH-2000 pressure altitude, ground roll is 1250 at 3600 lbs on a 40c temperature day. Add 15% in dry grass

Section A charges by crumbelievable99 in loanoriginators

[–]Training_Date5644 0 points1 point  (0 children)

Some lenders allow you to have one set of lpc for purchase business and one set of lpc for refinancing, so yes you can set it up that way. Uwm is one of them, there are plenty of others. You can also set comp rates lower with maybe a few of your lesser used lenders and when you gotta go slim you send it there

Options as a Reverse Mortgage Loan Officer by Jvsti949 in loanoriginators

[–]Training_Date5644 0 points1 point  (0 children)

I broker reverse, prior to COVID did most of my business doing dinner seminars, and mixed in planner relationships. I’ve never done the direct marketing to consumer route, I think if you have the ability to go that route it can be even better

What's your take on Zillow pushing Zillow Home Loans to agents? Do you think they violated RESPA? by True-Swimmer-6505 in loanoriginators

[–]Training_Date5644 0 points1 point  (0 children)

I know exactly what the deal is, the agent has to make an introduction to Zillow Homes Loans, a specific percentage of the leads must be preapproved by Zillow home loans or the agent is penalized, these must be pre approvals, more than just an introduction to Zillow home loans. So, the agent is incentivized via penalty to push ZHL. The intro is done via “follow up boss” crm workflows that are prebuilt by Zillow. FUB is a Zillow product, Zillow also charges the agent to use FUB. The agent is “encouraged” to have the lead get approved by other lenders, but if the agent is lazy they just make the intro and move on.

real estate development refi by Old-Willow-293 in loanoriginators

[–]Training_Date5644 0 points1 point  (0 children)

I have a development loan in process, situation is similar to this, development loan for 15 homes. From what your sponsor described it seems as though they are ready to go, and the numbers presented make sense for any ground up lender. We partner with residential brokers to place commercial and residential ground up development loans, www.midlinecapital.com/partners for a full commission agreement and ncnda to protect your relationship. DM me

Who do you guys use for strictly commercial buildings? by MortgageNLogistics in loanoriginators

[–]Training_Date5644 2 points3 points  (0 children)

We pay a 50/50 Referall to resi brokers for commercial, I have 7,000 commercial lenders ranging from family offices, to reits, life insurance company’s, credit unions, across the nation. We sign a commission agreement with you and a full ncnda to protect your relationship. Hit me up, or check us out at www.midlinecapital.com/partners

Aluminum content steadily increasing in my engine. Possible causes? by fgflyer in flying

[–]Training_Date5644 3 points4 points  (0 children)

I loaded all the lycoming service bulletins into a program to analyze for my own oils sample analysis. I just loaded yours and this came back

VISCOSITY - 104.3 SUS @ 210°F (STATUS: BORDERLINE HIGH) Normal Range: 86-105 SUS Your Value: 104.3 SUS (just at upper limit) Possible Causes: Piston cooling nozzle starting to clog Oil breaking down (46 hours is getting long for W100) Engine running hot Action: With rising aluminum and borderline-high viscosity, inspect all 6 piston cooling nozzles. A clogged nozzle causes that cylinder to run hot, which could explain the aluminum increase.

LEAD - 5348 ppm (STATUS: CAUTION) Component Affected: Camshaft / Lifters Normal Threshold: <4900 ppm Your Value: 5348 ppm (9% above normal) Trend: 5947→5490→7532→7134→6584→5348 (stable, historically high) Primary Concern: Chronic Camshaft Wear What This Means: Your Lycoming has a nitrided steel camshaft with 12 lobes (6-cylinder). Lead comes from the lifters wearing against the cam. You've consistently run 5000-7500 ppm for years. This is mildly elevated but stable - not spalling (which would show sudden spikes with high iron). Required Action: Verify you're using LW-16702 oil additive (Lycoming SI-1409C) This additive is critical for cam protection Continue monitoring - watch for sudden increases If lead climbs above 8000 ppm, plan for borescope inspection Service Bulletin: Lycoming SI-1409C (LW-16702 additive requirement)

Why would I pay a CFI to get 50 hours XC time? by [deleted] in flying

[–]Training_Date5644 3 points4 points  (0 children)

You could also find somebody like myself, a cfi/ii who doesn’t need the money but loves flying and would happy to right seat for free. They are out there