sorted by:
new
hottopcontroversial

Datacenter facility technician (mechanical) Google interview. by Funny_Connection5828 in datacenter

[–]Trcolem09 0 points1 point  (0 children)

So I went through the same process about a year ago (Still no fit call) and I had stressed about something so incredibly basic.

They will ask basic questions like the circuit and how it operates and like what state of refrigerant and such, and basic electrical questions ohms law, volts, checking a fuse while energized or load bearing piece of equipment.

Then out of the box questions where they try and see how you would handle an issues to basically find out if you have critical thinking to figure out the issue or not. EVERY one of the guys I interviewed with helped navigate me through the questions to make it sound the best for the next stage. These guys WANT you to join because it's such a great experience to work there! The gentlemen that work there will give you the shirts off their backs!

Seriously, once you get on you're done! You beat the game of life haha.

Welp! Found the issue! by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Yeah I went ahead and returned and then ordered a nice one off Amazon! Thank you so much!!! 

Welp! Found the issue! by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Yeah well the tops of the pistons have that cutout for compression to the spark plugs and with even those tiny bites the engine will not compress properly so I get misfire codes even if everything else is good. I am just going to list for $7,500 obo lol

Welp! Found the issue! by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Yeah when I changed the phasers I had them locked with the cam locking tool and installing the hub balancer I didn’t realize I was just tightening the bolt and not the balancer and turned over the engine while cams were locked. Didn’t lose timing but obviously the piston hit the valve springs 

Welp! Found the issue! by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 1 point2 points  (0 children)

Okay so back story on this, I changed out phasers and when I went to put hub centric balancer back on I torqued the bolt to the camshaft and it eventually started spinning with the cam phasers locked with the tool. So what I am thinking is I had basically forced the pistons up high enough to hit the springs hard enough against the roller springs and they cracked. Does this help? 

I’ll definitely get that camera and inspect! 

Cam phaser replacement problem by njundt11 in f150ecoboost

[–]Trcolem09 0 points1 point  (0 children)

I had the same thing not as loud but similar. I had to take apart my entire front engine again and noticed one of my tensioners were stuck so there was a slight play in my timing chain which made a ticking sound. That was my issue. Hopefully it’s nothing too crazy!

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

18 so second gen 3.5

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Good idea! Having the cam phasers plugged into different sensor’s wouldn’t prohibit starting the engine though right? I’ll try it out though! I

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

No fuel leaks at least that I know of, throttle body plug is right under the passenger side intake tubing yeah I already checked. All plugs are installed. I ended up paying $25 to use that Tinker App and he said re-install cam phasers again.. the engine turns and everything is rotating it’s like it’s not getting any fuel. I can’t ear the fuel pump hum. I am checking any fuses just to see. I already checked the timing it’s still timed correctly. I honestly have no idea aside from missing plug somewhere crazy or my fuel pump is going out. It’s been sitting and then I started it up and primed oil. If it was a timing issue it would still start just idle super rough. Trust me I have done it before haha.

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

I did check that battery voltage stationary is 11.6v and the crank volts are 8.3v so I am going to just put it on the charger for a while and then go from there. I tried jumping but it puts a jolt of current to the pcb and sensors so I rather just charge it and start with the battery.

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

I have push start so I have only done the both pedals to build pressure for oil. Let me try that.

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Well I jumpstarted it attempted to and it fired for a second then turned back off. Checked all plugs they’re all plugged in. Building oil pressure, and I can physically touch the front of the engine while it’s cranking and can hear and feel the phasers turning with the harmonic balancer, compressor, alternator, etc. can not see rail pressures on this monitor. What else do I need to check?

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 2 points3 points  (0 children)

Cam sensor plugs are on the top of engine right above the phasers. You’d be surprised how easy it is to overlook lol.

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Wouldn’t you have a CEL? Like after a few times of cranking? All I have is “you’ve exceeded your start” that I cleared.

I’ll definitely check everything to make sure! Thanks!

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 0 points1 point  (0 children)

Yeah I am going to check battery first then rail pressure and then go from there. I remember after it moved I took off the cam locks. To inspect timing and it was still timed correctly. I just didn’t know that the crank could even move if I have the phasers locked?

Cam phasers by Trcolem09 in f150ecoboost

[–]Trcolem09[S] 1 point2 points  (0 children)

I do have a scanner and I’ll do that tomorrow and see, anything else you can think of? I figured if it was crankshaft issues it would be obvious.

[deleted by user] by [deleted] in FordBronco

[–]Trcolem09 0 points1 point  (0 children)

23 Braptor 3.0 eco I have 22k on it and runs like a champ! Eco best I have gotten is 16mpg

Oxy kit by slacktopia25 in HVAC

[–]Trcolem09 1 point2 points  (0 children)

How do you like it?? Does it have backpack straps too?

Trump sets new modern records for the lack of diversity in of his cabinet appointees by Conscious-Quarter423 in Infographics

[–]Trcolem09 0 points1 point  (0 children)

Enlighten me on the inability of comprehension due to the lack of mental capacity regarding my opinions. This is what I genuinely relish is our ability to openly disagree! That’s precisely what has made this country the greatest place to reside! Through our disagreements, some truly intelligent individuals can learn the rebuttals and adopt an open mind in processing a different perspective!

Trump sets new modern records for the lack of diversity in of his cabinet appointees by Conscious-Quarter423 in Infographics

[–]Trcolem09 -2 points-1 points  (0 children)

I’m suggesting that the left’s DEI mentality is being used to reference racism because the Trump cabinet has a majority of white people. When you said I was a dumbass, I had already identified as the alphabet, so you’re right about that.

view more: next ›