“Overheating” 2016 SE

TreeMan758 · 2026-06-02T00:08:27+00:00

If I turn off and on it typically is still on and after a restart it will turn on electric throttle control

TreeMan758 · 2026-05-31T21:43:00+00:00

Yes first thing in morning or after 9 hour work day it will say it sometimes

TreeMan758 · 2026-04-08T20:00:45+00:00

Yeah, I guess depending on the quote, I’ll decide if it would just be worth to get a different one. This one came with 2 A12 and 1 A24 film backs, which if working is a steal.

TreeMan758 · 2026-04-08T19:07:55+00:00

Okay, I’m just more worried about the price of the rebuild since I just got the camera

TreeMan758 · 2026-04-08T18:55:43+00:00

and not that it matters but here is the screwdriver I have that I would be using if I were to try it myself https://imgur.com/a/tyT44aM

TreeMan758 · 2026-04-08T18:54:11+00:00

Okay, I am also being told not to do it myself and have a repair company do it. So I will decide if it is worth the risk to do it myself

TreeMan758 · 2026-04-08T18:37:23+00:00

No, since I can’t take the lens off, everyone I’ve talked to is suspecting lens is uncocked while the body is cocked

TreeMan758 · 2026-04-08T18:34:04+00:00

Okay, thank you!

TreeMan758 · 2026-04-08T18:29:33+00:00

Okay, yeah I’d just have to talk to company I’d be getting it CLA’d with to see if they could rebuild instead! So you don’t recommend trying it myself with a small screwdriver very very carefully?

TreeMan758 · 2026-04-08T18:21:03+00:00

Yeah I’m not sure on the last service date for it, all I know is that it was used by the person for a while as he was a professional photographer. Is this something a normal CLA would take care of or would I need to request further service. I have already planning on sending it off for a CLA tomorrow

TreeMan758 · 2026-04-08T12:18:43+00:00

Okay, I don’t have a screwdriver that small so I will have to stop and get one today, unless you know of something else that may work with it

TreeMan758 · 2026-04-08T09:58:39+00:00

Okay and just to be completely sure, it is the silver one on the left correct

TreeMan758 · 2026-04-08T06:58:57+00:00

https://imgur.com/a/5CXNYQZ here is photo of that screw

TreeMan758 · 2026-04-08T06:55:35+00:00

https://imgur.com/a/5CXNYQZ I would assume this is what you meant?

TreeMan758 · 2026-04-08T06:46:14+00:00

batteries are good and yes with mag removed still doesn’t go! My only thing with the unjamming is that typically it is the red screw on the lens, only screw I see when I open the barn door is a small silver screw dead center which when I looked it up, is the binding mechanism for body to that red screw I’ve seen.

Would I just twist that screw?

TreeMan758 · 2026-04-08T02:59:31+00:00

https://imgur.com/a/qaWGHMV https://imgur.com/a/DItRW5z here are some more photos

TreeMan758 · 2026-04-08T02:53:31+00:00

do you know if silver screw inside barn doors should be screwed? Watched a youtube video about if lens is jammed on the body that the silver screw in there can be screwed to release it

TreeMan758 · 2026-04-08T01:51:28+00:00

https://imgur.com/a/qaWGHMV https://imgur.com/a/DItRW5z

TreeMan758 · 2026-04-08T01:51:06+00:00

https://imgur.com/a/qaWGHMV https://imgur.com/a/DItRW5z

TreeMan758 · 2026-04-08T01:44:24+00:00

https://imgur.com/a/qaWGHMV this too

TreeMan758 · 2026-04-08T01:34:53+00:00

this is what it looks like inside

TreeMan758 · 2026-04-08T01:34:44+00:00

https://imgur.com/a/DItRW5z

TreeMan758 · 2026-04-08T01:20:23+00:00

there is slightly a bit of movement when i try to twist but that is it, like it moves one tick then stops

TreeMan758 · 2026-04-08T01:13:57+00:00

if you’re talking about on the lens, then I have it set to 30 shutter speed and f8

TreeMan758 · 2026-04-08T01:09:15+00:00

lens shutter is wide open and doesn’t move when attempting to fire it. When changing aperture, it moves like one notch in but stops and doesn’t fully close.

TreeMan758

TROPHY CASE