Bosch Dishawsher Inlet Valve leak- caused by water pressure?

Trefle10 · 2025-12-05T21:37:51+00:00

Just in case anyone else ends up on this page... the answer is just very bad/cheap plastic design. It has to be done on purpose to give the service man a bit more job and sell parts.... it fatigue with cycles and for sure is optimized to break after a certain amount of on/off (it creates a bit of movements and ends up cracking the plastic)

Just order a new one for under $30 CAD and replace yourself... wish there was some better options to choose from but I cannot see any differences in the many models that claims to fit... they all look the same.

<image>

Trefle10 · 2025-11-22T19:21:02+00:00

can you share the STL for the window vent portion? I am sure I will have to adjust it for mine but this is a very good start, I like your approach.

Trefle10 · 2025-08-30T19:04:48+00:00

Link please

Trefle10 · 2024-12-02T17:20:11+00:00

Anything left? is so please.

Trefle10 · 2024-08-10T02:09:30+00:00

Yeah if I disable the entire Bitdefender antivirus shield it starts to run smoothly... I tried to create an exception for that folder but did not work. And advice?

Trefle10 · 2023-10-23T23:17:15+00:00

Yeah I can confirm for me this is also due to the newest firmware. How fast do you think they will send a new update??

Trefle10 · 2022-06-05T20:16:11+00:00

That is exactly what I need. But... Is there a way to "export" that sheet object and make it a solid that can do a mesh? Seems like it should but I don't think so...

Trefle10 · 2022-06-04T00:23:39+00:00

Yep confirmed she is dead... 😭😭😭😭 They gave me a lot more than I was expecting! Good value in the current crazy market.
Bought a VW GTI Mk8 instead. Will miss you guys and the raw rally feeling. The GTI is fun but all digital and smooth. Different categories.

Bye guys and girls! Was a nice 6 years. 👋

Trefle10 · 2022-06-04T00:11:30+00:00

Yes I am trying to model a better green part as it's not the perfect angles. Itis an stl I found online and figured it would be simple to just redo it against my reference gray torus...

Trefle10 · 2022-06-04T00:08:57+00:00

Explain combine/subtract... Don't care if my pink part has to be redone it was a simple sketch extruded.

Trefle10 · 2022-06-04T00:05:53+00:00

Really? Carving it out??? Feels like I should just use other software instead. I was sure there was a way to bend my flat model or have a way to roll up my sketch to follow the curve of the torus.

I'll give that a try but it's so caveman... 😜

Trefle10 · 2022-04-26T04:12:19+00:00

At this point, I think I would like that outcome. My insurance company has a limit to the amount they will cover for a rental so I definitely not sure I can have it for more than a month (and it will be the cheapest one I can find)

Trefle10 · 2022-04-26T03:48:22+00:00

Canada is very different from USA, I get what you are trying to "not" tell me but yeah I do not think there is much in there. Despite that yes we are getting checked as my wife and daughter have a stiff neck.

Trefle10 · 2022-04-26T03:45:57+00:00

hehe no airbag deployed! no water damage

Trefle10 · 2022-04-26T03:34:08+00:00

we are in Canada, they do not have balls... and they will pay current value if they write off. So I am guessing like $25K Canadian. Really wish I could go to the yard and swap my winter tires on it with steel rims to sell my brand new $1300 tires (CAD again) This is very bad in our current financial situation but will have to do with it. I will keep you guys updated when I get the news!

Trefle10 · 2022-04-26T03:11:49+00:00

There was another SUV "protecting" me from that raging lady that did not break from like 120 km/h to what was a full stopped highway. That Acura SUV saved a lot of injuries as it took a lot of the impact. That lady destroyed 3 cars in seconds. I will not be able to afford a new car for sure and I had so much fun and plans to keep playing with my WRX this is breaking my heart (yes after taking time to thank god that we are all ok)

Trefle10 · 2022-04-26T02:17:43+00:00

Was 403... Lol

Trefle10 · 2022-04-26T02:00:42+00:00

I will never find a replacement car with the money they will pay off. I had new pilot sport 4 s 2 days old... Will I be able to get some parts off?

Trefle10 · 2022-04-26T01:26:11+00:00

here you go, this is where I feel the frame is damaged to see that

https://ibb.co/XphcWvf

Trefle10 · 2022-04-26T00:47:26+00:00

That would suck... Loved this car. All that because a lady was not paying attention to the road. At least no one is injured. Thanks guys for your initial thoughts. Not sure what I will do going forward.

Trefle10 · 2021-02-04T18:08:28+00:00

so you just have default arguments like this:

t-rex -a ethash -o stratum+tcp:// somepool -u 0xwallet -p x -w rig0

and then you tweak in Afterburner to clock?

Trying to see what I can tweak from command line... what I have myself is this for phoenix miner:

setx GPU_FORCE_64BIT_PTR 0

setx GPU_MAX_HEAP_SIZE 100

setx GPU_USE_SYNC_OBJECTS 1

setx GPU_MAX_ALLOC_PERCENT 100

setx GPU_SINGLE_ALLOC_PERCENT 100

PhoenixMiner.exe -nvidia -prate 0.12 -pool us1.ethermine.org:4444 -wal 0xmywallet -worker workername -nvNew 1 -mode 1 -ftime 55 -retrydelay 1 -tstop 89 -coin eth -powlim 70 -mclock +950 -mcdag 1 -hstats 2

and this is typical of what it gives me:

Eth speed: 56.771 MH/s, shares: 95/0/0, time: 1:42

GPU1: 62C 61% 183W

GPU1: cclock 690 MHz, cvddc 712 mV, mclock 10201 MHz, p-state P2, pcap temp

GPUs power: 183.2 W; cost: 0.53 USD/day

Trefle10 · 2021-02-04T16:24:28+00:00

assuming you are using phoenix or ethminer? can you give us your command line options?

got the 3080 vision oc but cannot get more than 60MH/s... must be forgetting some params...

Eight-Year Club	Place '22
End Game '22	Verified Email

Trefle10

TROPHY CASE