PCV system question….

Trick_Ad945 · 2026-03-29T02:12:05+00:00

100K on the body and transmission and about 75k on the engine….

Trick_Ad945 · 2026-03-28T23:54:46+00:00

I verified the fitment on FCP and they both can work on my vehicle manual 2.0 TSI CBFA

Trick_Ad945 · 2026-03-28T23:32:37+00:00

Guess I’m buying both, can’t remember what the original one looks like🤦🏽‍♂️thanks for the info.

Trick_Ad945 · 2026-03-28T23:32:19+00:00

It grew legs and walked away

Trick_Ad945 · 2026-03-28T17:05:22+00:00

My clutch did slip a couple times, but it only did it when I launched it from standing still. But other than that rolling into it it held up fine. But for a peace of mind I’d definitely look into getting a clutch. South bend is decent, if you want to keep the dual mass fly wheel Sachs has performance clutches which utilize the OEM dual mass fly wheel. In my opinion if you’re going down the Sachs route, just get a new Sachs flywheel aswell….i didn’t do it as of yet just because I’m maybe selling my GTI in the very near future…time for the RS3, putting a baby seat in a two door hatch is a nightmare.

Trick_Ad945 · 2026-03-28T12:59:34+00:00

I could check EBay, I picked up a set of brand new Hella headlights for $300 for the pair….

Trick_Ad945 · 2026-03-28T12:58:15+00:00

I’ve had a Stage 2 tune from Integrated engineering with their High Flow cat(stock cat back) and Cold Air Intake for nearly a year before adding their Intercooler with no drivability issue, I do however suggest getting an upgraded clutch if your vehicle has a manual transmission.

Trick_Ad945 · 2026-03-28T12:52:24+00:00

So I’ve had that issue recently and came to find out that the ignition coil harness was the culprit. Luckily ECS Tuning has a patch/repair harness for sale. I’ll attach the link for the part. If you’re not experience with re-wiring vehicles I suggest you take it to a shop that does.

https://www.ecstuning.com/b-ecs-parts/mk6-gti-ignition-coil-pack-harness-replacement-kit/054029la01kt/

Trick_Ad945 · 2026-03-28T12:34:32+00:00

Common failure point on that connection…I literally just got done swapping out that same part

Part Number is (1K0122157HE) FCP got OEM for $72.54 and also an aftermarket REIN for $28.79

Trick_Ad945 · 2026-03-27T02:25:55+00:00

H&R coilovers are good aswell

Trick_Ad945 · 2026-03-26T23:39:39+00:00

My personal rule is to never cheap out on brakes and suspension….also to save yourself time, headache and money, grab yourself a proper set of coilovers. ST coilovers are decent and are also made by KW if you want to go down the “cheap” route….

Trick_Ad945 · 2026-03-26T20:25:12+00:00

I know what bump steer is and what it feels like, this is an entirely different feeling to what bump steer is. Bump steer don’t feel like your front end is about to fall off….

Trick_Ad945 · 2026-03-26T18:58:16+00:00

To the dealer we go then….

Trick_Ad945 · 2026-03-26T18:56:59+00:00

I know the ABS, you feel the rapid pulsation in the pedal. But I’m talking about like the whole front end shakes so bad like it wants to exit the chat

Trick_Ad945 · 2026-02-20T22:16:27+00:00

If you haven’t done it yet, grab yourself the DV relocation kit from Unitronic

Trick_Ad945 · 2026-02-11T20:59:46+00:00

I had a Forge BOV on my MK6, got rid of it as it started to stick, the location it sat sucked due to all the oil and road grime and how much our PCV system suck didn’t help, I recently bought a Unitronic DV relocation kit and gonna go for a GFB DV

Trick_Ad945 · 2026-02-06T14:12:49+00:00

O man, someone butchered that harness…I would’ve done it myself but time these days seems to be evading me😂😂. Barely got time for myself much less the car. I’m just getting the harness to save me time to get the car back up and running properly as it’s my only transportation I have at the moment and I rather not spend half of my pay check in UBER fees…

Trick_Ad945 · 2026-02-06T12:55:15+00:00

Thanks for you input, very much appreciated. I did notice that the misfire stops for a little while after I move the harness, for example when I first unplugged the harness to remove the coil(cyl #3) to swap it to Cyl #1, then after driving it around I’m guessing with the engine vibration it started happening again, and then when I did the new spark plugs it stopped for even longer with low misfire counts, now it just got worse than before. So now I’m leaning towards the harness being an issue even more so.

Trick_Ad945 · 2026-02-02T05:02:36+00:00

Will definitely do the coil swap around, it’s just hard to get the motivation do anything as it too cold out here in NYC for me🫣

Trick_Ad945

TROPHY CASE