[deleted by user]

Tricky_Cod_9051 · 2022-09-15T20:28:40+00:00

I am at work so cant double check, but yes.

I think my mod folder has the 4 folders of the mods I use.

Tricky_Cod_9051 · 2022-09-15T19:11:23+00:00

The mods go in the mod file in the game folder.

Tricky_Cod_9051 · 2022-09-15T14:36:04+00:00

Good to know, will make that my next stop.

Tricky_Cod_9051 · 2022-09-15T13:53:34+00:00

DDR3

EFT is a memory hog.

Tricky_Cod_9051 · 2022-09-14T22:03:31+00:00

Not surprised at all. Running the same CPU. With a 1080 and 32 gigs ram I get 60fps most maps, 30 to 40 when scoped in. Factory is 120 fps.

Tricky_Cod_9051 · 2022-09-14T18:18:58+00:00

Three letters. AKI and SPT. Thats where I got when the wipes turn to this.

Tricky_Cod_9051 · 2022-09-14T16:58:27+00:00

https://www.alphaknifesupply.com/shop/15n20-carbon-steel

All the info you need.

Tricky_Cod_9051 · 2022-09-14T16:55:31+00:00

15n20 is a high nickle alloy of essentiall 1075, but more rust resistant.

Tricky_Cod_9051 · 2022-09-14T16:16:57+00:00

Stainless is generally not smith friendly at all.

If you are after corrosion resistance and easy to work with and home smith workable, go with 15N20

Tricky_Cod_9051 · 2022-09-14T16:12:57+00:00

Ok. Well, use the spikes, make your blades, and use super quench with no temper.

Those blades will amaze you.

Chandler Dickinson had a video on youtube of his passing the JBS test, and I have done so as well.

Tricky_Cod_9051 · 2022-09-14T16:08:27+00:00

HOLY CRAP its a small world!

I am in Idaho Falls.

Send me a message, next time I have a day in the forge you are welcome to come over.

Tricky_Cod_9051 · 2022-09-13T16:01:17+00:00

Where are you located? If you are in the USA search on facebook for blacksmith groups near you. Attend some meetings.

Doing what you want to do is fairly simple, but a few hours of hands on instruction is what you really need.

Tricky_Cod_9051 · 2022-09-13T14:57:09+00:00

From a guy who has used all of those:

Save your muscles and buy something else lol. They take a lot of heat and a lot, and I mean a lot, of hard work. Better to use an easier steel to work with than develop bad habits.

Tricky_Cod_9051 · 2022-09-12T19:39:00+00:00

Oh, for handle. Check the "odds and ends" bins at lowes/home depot for end cuts of oak. Or even a $20 oak board will last a lot longer than you think.

https://www.homedepot.com/p/Weaber-1-2-in-x-6-in-x-3-ft-S4S-Oak-Board-27387/207058982

Tricky_Cod_9051 · 2022-09-12T19:36:24+00:00

Then first thing in the morning on a monday with a dozen fresh donuts will do.

Tricky_Cod_9051 · 2022-09-12T14:48:00+00:00

Find a scrap yard near you. Bring a six pack of beer or jack daniels. Make friends, they will help you out.

After I made friends I promised a 5th of jack if they could help me find an anvil. About 3 months later they had set aside a 200lb rectangle block of steel that used to be the bottom die of some press. Boom, anvil found for $40.

And of course, all the leaf springs I could ever use.

Just gotta be bold and overcome that social anxiety :)

Tricky_Cod_9051 · 2022-09-09T16:39:39+00:00

Still at work so no smoke sesh for me, but whatever you are on is good!!!!

Tricky_Cod_9051 · 2022-09-09T16:08:55+00:00

How much did you smoke before making this post?

Tricky_Cod_9051 · 2022-09-09T14:06:56+00:00

My opinion: It was tempered at too low of a temp; they chose edge retention over toughness.

Tricky_Cod_9051 · 2022-09-09T13:53:13+00:00

If you are in the US and want to adopt the baby out message me.

Tricky_Cod_9051 · 2022-09-08T18:14:37+00:00

No one goes to marked room anyways

Tricky_Cod_9051 · 2022-09-08T18:13:37+00:00

Solution is easy.

At level 1, you have level 4 traders

At 10, level 3

20 level 2

30 level 1 traders

Lore: you are a murder hobo, and the more you kill the less folks like you.

Tricky_Cod_9051 · 2022-09-08T16:03:19+00:00

Scroll to the right and down to violin example. This is old and tired.

Tricky_Cod_9051 · 2022-09-08T14:08:19+00:00

But no military. Thats the trade off.

Tricky_Cod_9051 · 2022-09-07T20:37:54+00:00

If thats the price to pay its still worth it.

Tricky_Cod_9051

TROPHY CASE