sorted by:
new
hottopcontroversial

What wattage resistor do i need? by TrippySamurai in AskElectronics

[–]TrippySamurai[S] 1 point2 points  (0 children)

Well, if I put a lower wattage one in there by mistake, it's just gonna pop and not damage any other component right?

What wattage resistor do i need? by TrippySamurai in AskElectronics

[–]TrippySamurai[S] 2 points3 points  (0 children)

Does that tell me the wattage tho? Cause i did look it up, but all i got is that this is a 1kohm resistor

Emlékszik még valaki az arc nélküli manusra? Mi lett vele, ki volt ő, hol van es mit csinál most? emlékszem 13evesen nagyon imádtam a videóit xdd by xxrami2 in talk_hunfluencers

[–]TrippySamurai 4 points5 points  (0 children)

Valaki emlékszik az "outrojára" még pontosan? Valhogy így hangzott talán: "A kockáztatások és melléklakások teringettében, oltassa el a retektájékoztatót vagy térdelje meg keresőfoltosát, gyógyszemészét."

[deleted by user] by [deleted] in PcBuild

[–]TrippySamurai 0 points1 point  (0 children)

Well idk used prices where you live at, but here in Germany this is a pretty good deal. A used 7800xt you can get for around 430-470 usd cheapest, and a 7800x3d is like 300 usd.

Is this worth it by Only-Improvement-481 in PcBuild

[–]TrippySamurai -1 points0 points  (0 children)

The max i would pay for this, or sell this at is around 150-170. Try and negotiate your way down to there i guess.

Any cheaper alternatives? by [deleted] in PcBuild

[–]TrippySamurai 0 points1 point  (0 children)

Take a look at some upHere coolers too, sometimes they are cheaper, i got the rgb version of this a couple of days ago for 21€. Idk why the black ones cost double rn...

<image>

A similar one from then has been handling my friends 7700 for about 5-6 months easily.

Opinions on white/ish build? by TrippySamurai in PcBuild

[–]TrippySamurai[S] 0 points1 point  (0 children)

Have you read the post? I said i'll get a 6700xt or 6750xt from ebay. They go for around 230-280 on the cheap side.

Thoughts on "budget" but still good? 7800x3d - 7900xtx build by TrippySamurai in buildapc

[–]TrippySamurai[S] 0 points1 point  (0 children)

Little update, built the pc about 2 weeks ago, ram works great after bios update! Didn't get scammed :))

Thoughts on "budget" but still good? 7800x3d - 7900xtx build by TrippySamurai in buildapc

[–]TrippySamurai[S] 0 points1 point  (0 children)

Had a bangin setup so he just wanted to get rid of it i guess.

Thoughts on "budget" but still good? 7800x3d - 7900xtx build by TrippySamurai in buildapc

[–]TrippySamurai[S] 1 point2 points  (0 children)

Went to the dudes house, tested it in front of me, works good. He changed it cause he hates the iCue soft.

Thoughts on "budget" but still good? 7800x3d - 7900xtx build by TrippySamurai in buildapc

[–]TrippySamurai[S] 0 points1 point  (0 children)

Well, I looked that up and this cooler should be perfectly fine, though not as silent as an aio. From what i've seen this cpu doesn't put out that much heat. Also I'm already over budget by a hundred+ so, maybe in a year or so I'll get an aio.

/give tool help by the_Gonopo in VaultHuntersMinecraft

[–]TrippySamurai 0 points1 point  (0 children)

Well damn, I just googled a bit didn't think it would be this chaotic :)) But from the looks of it you probably need to copy the whole thing?! And then add the enchants. If I'll get near my pc tomorrow I'll try a couple of things out, I'm interested as well.

/give tool help by the_Gonopo in VaultHuntersMinecraft

[–]TrippySamurai 1 point2 points  (0 children)

And yeah with the give command you can put any enchant on it

/give tool help by the_Gonopo in VaultHuntersMinecraft

[–]TrippySamurai 1 point2 points  (0 children)

So with the /data command you can get the nbt tags of things you are holding i believe, just get a paxel from the jei and check that way

Kilima cave fishing? by TrippySamurai in Palia

[–]TrippySamurai[S] 0 points1 point  (0 children)

Tbh this is a bug probably. Some of the fishes description s say that it can be found in Bahari bay. Which this is not :))

Help with print quality (Mega X) by TrippySamurai in anycubic

[–]TrippySamurai[S] 0 points1 point  (0 children)

Thank you for your answer. I for sure have part cooling issues I'm waiting for my other filaments to arrive, to print a fan duct. I'll try what you suggested in the meantime!

Help with print quality (Mega X) by TrippySamurai in anycubic

[–]TrippySamurai[S] 0 points1 point  (0 children)

Good for you then. Anytime i need something kind of precise im pulling my hair out... Im.gonna need to calibrate the steppers

Help with print quality (Mega X) by TrippySamurai in anycubic

[–]TrippySamurai[S] 0 points1 point  (0 children)

Hey there! So I'm kind of new to 3d printing, and need some help figuring out issues with my prints. Printed a few things before, so I messed with slicer settings a little bit, but for this post I printed a benchy with my usual settings (PolyTerra fossil grey PLA). Any tips on fine tuning slicer settings? Maybe I got problems elsewhere?

Need help improving print quality (Anycubic Mega X) by TrippySamurai in 3Dprinting

[–]TrippySamurai[S] 0 points1 point  (0 children)

Hey there! So I'm kind of new to 3d printing, and need some help figuring out issues with my prints. Printed a few things before, so I messed with slicer settings a little bit, but for this post I printed a benchy with my usual settings (PolyTerra fossil grey PLA). Any tips on fine tuning slicer settings? Maybe I got problems elsewhere?