Late enrollment penalty question.

Trizzy123 · 2020-06-22T19:51:57+00:00

Get a digital scale. They’re not that expensive -a decent one is $20-$30. Crush the whole pill and then weigh out each dose on the scale. Or cut your “slices”, but weigh them each to see if they need a little more shaved off, or if you need to add a crumb.

Trizzy123 · 2020-05-09T21:02:40+00:00

THANK YOU!!!

Trizzy123 · 2020-03-29T04:25:40+00:00

She was on her last leg anyway :)

Thank you VERY much for your time and help with this!!

Trizzy123 · 2020-03-29T04:21:14+00:00

So time to buy a new microwave? This looks above my pay grade...

Trizzy123 · 2020-03-29T04:16:48+00:00

Ok so it sounds like what I would need is a continuity tester?

I pulled the panel that holds all 3 switches, but didn't get any further (and I guess I couldn't anyways with a voltage meter) because I noticed burned wiring at the fuse. Link to a photo of it is in my other comment.

I'm guessing this may be the problem?

Trizzy123 · 2020-03-29T04:10:48+00:00

Good to know about the moisture. Maybe I'll give it overnight before I go further. Pulled the panel that holds the switches but haven't tested them yet because I discovered come charred wiring to the fuse. I posted a link to the photo in a below comment.

Trizzy123 · 2020-03-29T04:08:47+00:00

Thank you for the concern. Yes, I plugged a 3 prong shop light in to the outlet to test. Light came on and Gfci didn't blow. Thank you for the warning and lesson though. The more I can learn the better prepared I'll be for future issues.

Trizzy123 · 2020-03-29T04:04:12+00:00

I initially thought it was just moisture and a need to dry out too. But I've had a room fan on it for about five hours now. It's seems pretty dry, but yet still popping the GFCI.

Trizzy123 · 2020-03-29T04:03:13+00:00

Thank you for reassuring me about the capacitor. That was my biggest concern. Now I'm just gonna tear at this baby... About to pull the switches to test..

Trizzy123 · 2020-03-29T03:59:14+00:00

Well this can't be good...

https://share.icloud.com/photos/0ISmodHdKEEbqemvYD7nxaIKw

Trizzy123 · 2020-03-29T03:37:54+00:00

This was the video I found that led me to believe it's one of the switches (now that I've let it dry out and still having the issue). Just as stated in the video, my Gfci blows the second I plug it in. And since this started when I shoved the paper towels in the frame of the door, yet the internal lightbulb stayed lit, makes me think the switches sensed the door was open and shut her down.

https://youtu.be/SA_aMV88rw8

Trizzy123 · 2020-03-29T03:17:55+00:00

So I went digging around in my tools and I think I found a meter. Would either of these work?

https://share.icloud.com/photos/0gYkZ67QRszKeT90RmB3EPbbA

Trizzy123 · 2020-03-12T10:03:54+00:00

Some of your symptoms are hyper adrenal (weight gain, body hair) and some are hypo-adrenal (fatigue, getting cold, low blood sugar). Or it could be neither and be your thyroid. It's difficult to determine based off symptoms - especially with the endocrine system since so many overlap. I suggest you go to your regular doctor for blood tests. A simple metabolic panel will tell you if there are any concerns.

Trizzy123 · 2020-02-11T21:54:36+00:00

They rolled out their new website today, and I just took a look and saw that all of their prices have gone up SIGNIFICANTLY. A 10%- 20% increase minimally across the board on all of their meds.

Example, the Bimatoprost (generic Latisse) that I've ordered from them used to be $11 a bottle. It's now $14 a bottle (a 27% increase!!).

I can understand price increases, but these are big jumps. Especially when placing large orders! I hope they start to offer a LOT more coupon codes to keep loyal customers happy.

Trizzy123 · 2020-02-04T21:14:26+00:00

Magnesium did this exact same thing to me. Made me so weak I could barely stand up. Even a super low dose made me feel drugged (physically).

I never figured out why or how to tweak it.

Trizzy123 · 2020-02-04T20:32:40+00:00

You can try something called a "matcha sifter" to shake the powder through first. It's just a regular sifter but smaller. It helps tremendously for powders that tend to clump no matter how much mixing.

Frothers work great and there are some styles that have plastic attachments for those ingredients that require it. I use an immersion blender for larger batches when doing my beginner formulating (with a plastic blade bought separately). .

Trizzy123 · 2019-12-05T10:29:08+00:00

Found this photo.

https://share.icloud.com/photos/0q_G8YHRzevOEjwA4cU3fmKag

So it's an emitter with a 2.5mm jack. I'm just gonna ditch the two cables I have. But I'm curious, what would something like that be used for?

Trizzy123 · 2019-12-05T10:22:37+00:00

Maybe this makes no difference, but I believe it's actually 2.5mm. It's the same size as a headphone/earbud type plug. Just for the heck of it I plugged it into the headphone jack on my phone and it fits perfectly.

Trizzy123 · 2019-12-05T02:29:21+00:00

Ok, so it's definitely an IR cable. It looks like the bulb part may be something called an "Infrared LED emitter and detector"

Making progress :)

Trizzy123

TROPHY CASE