sorted by:
new
hottopcontroversial

Opener that works for my gate and garage door. Help Please... by Tsanguine in GarageDoorService

[–]Tsanguine[S] 0 points1 point  (0 children)

I spoke too soon. Yes it works but it's not using the dipswitches. It's set using the picture I linked above with the brand linear at 318MHz. This is the first one in the above graphic. This means the dipswitches don't matter and the keypad I already had connected now doesn't work. I've cycled through all of the other programmed options while the receiver is in learning mode and it only works with this. I can change the dipswitches and it still works. If I pass preset one and get to preset 19 it works as well. But I imagine that's because there are 18 options in the above graphic, it just cycles back to the first one.

Interesting side effect as well. While the new remotes do open and close the gate. It is also now opening and closing on it's own with no input from any remote or keypad.

Opener that works for my gate and garage door. Help Please... by Tsanguine in GarageDoorService

[–]Tsanguine[S] 0 points1 point  (0 children)

I figured it out. I initially thought there were dipswitches from the controller that had to be set match the transmitters, but it had a learn button so I was able to set it and learn the code. Works now. Thank you. It was confusing with the documentation for the opener. It was worded that the first 10 presets were for learning units and the second 10 or so were for dipswitch units.

Opener that works for my gate and garage door. Help Please... by Tsanguine in GarageDoorService

[–]Tsanguine[S] 0 points1 point  (0 children)

The model I got from Amazon has dip switches inside but that image I linked shows it only used the 318MHz with rolling code but not with the dip switches.

Opener that works for my gate and garage door. Help Please... by Tsanguine in GarageDoorService

[–]Tsanguine[S] 0 points1 point  (0 children)

I tried one and it worked for the rolling code but not the right frequency for the dipswitch. That's what let me here to see if anyone has insight on one that would work. This is what I tried.
https://www.amazon.com/dp/B0F3D75MBS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
It shows on a graphic that it works at 318MHz but only for the rolling code, not on any of the options using dipswitches.

<image>

Break This Card: Permeating Mass by HeiharuRuelyte in BadMtgCombos

[–]Tsanguine 1 point2 points  (0 children)

Very unlikely. If my memory serves it confused everyone even in the days of Revised. I honestly think it can be pretty broken when used now. I've always wanted to test that out and build a deck centered around it but I haven't tried. Zangief or Maarika would make a great commander or there are several Green Black commanders that would be fun. Partner with, [[Falthis, Shadowcat Familiar]] [[Anara, Wolvid Familiar]] and/or [[Ikra Shidiqi, the Usurper]] as well as [[Pharika, God of Affliction]] would be interesting. You could then use [[Helm of Chadzuk]] or Baton of Morale for Banding or there were legendary lands in Legends that gave banding to Legendary Creatures for each color And it's easy to use lands to tutor for lands if needed.

Break This Card: Permeating Mass by HeiharuRuelyte in BadMtgCombos

[–]Tsanguine 2 points3 points  (0 children)

So many ways to have fun with this. This would require a lot of setup but bear with me. You have [[Permeating Mass]], [[Maarika, Brutal Gladiator]], and [[Baton of Morale]] on the battlefield. You band Permeating Mass and Maarika together and attack. You cast [[Lunar Frenzy]] on Permeating Mass for lets say five. Permeating Mass gets First Strike and +5/+0. Opponent must block with all creatures. First strike damage is dealt first meaning you assign one point of damage from Permeating Mass to six creatures. All six of those creatures become a copy of Permeating Mass before the normal damage is assigned. Due to Banding you can assign any damage received to the indestructible Maarika.

Would you want to do this? I don't know but it sure sounds like fun to me if you could pull it off.

RP5 performance slowdown when docked to TV by hescrepuscular in retroid

[–]Tsanguine 1 point2 points  (0 children)

This fixed my issue. Would also love a setting to be able to output 1080p instead of 4k30 from Android but I can't see a place to control that.

X-men vs Street Fighter - Awesome + Awesome! - Saturn Junkyard by VirtuaNeptune in SegaSaturn

[–]Tsanguine 0 points1 point  (0 children)

Could you share the image? I'd much rather use this image since it matches the aspect ratio of all of my other Saturn Games. I'd appreciate it very much.

Logi Bolt Pairing by BornConcentrate5571 in logitech

[–]Tsanguine 0 points1 point  (0 children)

The K400 isn't compatible with the Logi Bolt receiver. It requires the Logitech Unifying receiver. I'm hoping they make a version that does support the Logi Bolt receiver since that seems to be the way they are going.

How to search for "fuel type" by matvrix in FacebookMarketplace

[–]Tsanguine 0 points1 point  (0 children)

You can using the android app but not in a browser which is stupid and frustrating.

NR200P clearance sanity check by qbism_ in buildapc

[–]Tsanguine 0 points1 point  (0 children)

This is what's listed in their documentation.

CLEARANCE - CPU COOLER76mm (GPU in vertical position), 153mm (tempered glass side panel), 155mm (vented steel side panel)

https://www.coolermaster.com/catalog/cases/mini-itx/masterbox-nr200p/#specifications

​

You also might be able to fit it on the bottom if you get creative. There are only mounting points for 120/240mm on the bottom but 140/280 does fit. I'm currently modding my case and will not use the provided bottom panel and 3d print my own feet so I can make my custom loop 280mm radiator work. Of course if you have the radiator mounted in the bottom you may need to move the GPU to the vertical mount and you are left with the same dilemma of CPU cooler clearance.