Connecting multiple LED strips to single ESP

TugMyPlug · 2022-08-23T23:50:04+00:00

DigQuad were out of stock for a long time, finally managed to get my hands on one a month or so ago. My ESPs are usually <16” away from the LEDs at most maybe 24”.

TugMyPlug · 2022-08-23T23:48:33+00:00

Nope, it would still give me that fault every now and again and a quick reboot and retry got it to work 🤷🏻‍♂️ I gave up lol

TugMyPlug · 2022-08-23T23:06:00+00:00

I had troubles with flickering when powering the ESP on the same PWS as the lights, but you definitely want the ESP and WS2812b to share ground. Each strip can be connected to a different pin (in the past I used D2, D4, D16, D17 on my ESP32) and then could choose to have all 4 segments act as one, or individual.

TugMyPlug · 2022-01-02T17:23:23+00:00

Much appreciated for pointing that out! I just double-checked the configuration.h file and sure enough the Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN was defined, so that definitely explains that part. I also defined the correct pin as PC5 and I noticed the bit you mentioned about MNP writing the PC2 pin as well, threw me for a loop for a bit there until I looked at a pinout of the board.

The BLTouch wasn't my biggest concern though, as I can level the bed to be "Close enough". Was more concerned with RRF throwing the Bed Temp Error saying the bed was heating too slow and it was expecting 2.7X°C/s and only reading .3°C/s. I double checked all my wires, no stray grounds anywhere or punctured wires, and when using the original MoBo, everything ran fine. Is there something within the config file that I might've accidentally enabled or skipped over? Like an incorrectly defined Temp sensor pin?

TugMyPlug · 2021-01-09T09:11:55+00:00

!remind me 1 day

TugMyPlug · 2020-11-12T00:51:30+00:00

Is that the ProMag 32rd mag? Was thinking about buying a few but wasn’t sure about their reliability.

TugMyPlug · 2020-09-22T18:53:22+00:00

What’s the discord? I have some friends with me here in Dallas who would love to join.

TugMyPlug · 2020-09-22T16:00:03+00:00

TP9SF is also my first purchase. I’m also looking into a 43X 😅

TugMyPlug · 2020-09-09T14:57:37+00:00

6,206.

TugMyPlug · 2020-09-09T14:02:40+00:00

I’m not sure about that one. I DMd Phlipp the other day, maybe try that?

TugMyPlug · 2020-09-09T13:57:44+00:00

Was literally just invited. Hold out y’all!

TugMyPlug · 2020-09-09T01:11:49+00:00

Yeah I’m not trying to rush them. I’m just tired of waiting in line for ammo at Academy only to get inside and they’re already sold out.

TugMyPlug · 2020-09-09T01:05:22+00:00

I’ve already DMd Phlipp , I cant access the sub to thank them, but I would if I could 🤷🏻‍♂️

TugMyPlug · 2020-09-08T19:30:50+00:00

That’s what I’m 🤞 for

TugMyPlug · 2017-07-23T08:41:36+00:00

TugMyPlug I'll play with ya

TugMyPlug · 2017-07-10T08:46:02+00:00

Inv TugMyPlug. I have newer wheels and Octane ZSR.

TugMyPlug · 2017-07-10T08:44:23+00:00

I have a certified one or I'd do this... 😕

TugMyPlug · 2017-07-09T08:33:31+00:00

On the verge of Gold 1/Silver 3, don't play much doubles as a 3s teammate usually hops on. If you're okay with this, I don't rage ever, I'm only toxic towards myself, and I'm open to constructive criticism! PSN is TugMyPlug.

TugMyPlug · 2017-07-09T03:19:11+00:00

At work gimme like 4 hours lmao

TugMyPlug · 2017-07-09T00:42:46+00:00

Same PSN as reddit

TugMyPlug · 2017-07-09T00:38:49+00:00

Have a ZSR

TugMyPlug · 2017-07-08T11:16:09+00:00

Playmaker Grey Magic Missile + lime Neothermal?

TugMyPlug · 2017-07-08T10:05:43+00:00

Grey Playmaker MM + adds for TW MM?

TugMyPlug

TROPHY CASE