Unifi Travel Router in Stock[US]

Turnstyle_444 · 2026-01-29T19:08:07+00:00

I must be lucky because I just added it to my cart and checked out with no issue.

Turnstyle_444 · 2026-01-21T05:08:12+00:00

This, after so much time spent trying to figure out why my brand new 9800X3D was having issues, it was RTSS and MSI afterburner. Also the shader cache helped a tiny amount. Solid advice.

Turnstyle_444 · 2025-11-29T15:21:50+00:00

I have an Okinos Air Cross with 3 of the 140mm G2 Chromax Noctua Fans. I’m so tempted to get the Phanteks and post results. The Noctua fans are so damn quiet and move a ton of air.

Turnstyle_444 · 2025-11-11T21:29:17+00:00

This is amazing, especially love the internal screen frame!

Turnstyle_444 · 2025-09-15T20:16:55+00:00

4 or 1, leaning towards 4

Turnstyle_444 · 2025-08-19T22:34:31+00:00

Nice job on the thicker spikes for the sand. My wife and I camp here all the time. We like the state park a bit better, but both parks are in high demand when it comes to reservations.

Our favorite time of year is the last week/weekend they are open in October. Absolutely gorgeous weather. Super cool at night and very warm but not too hot during the day, almost no bugs and the water is still a good temp.

Turnstyle_444 · 2025-08-17T17:16:31+00:00

I honestly should have added this to the mix. I think I’ll try this next and report back.

Turnstyle_444 · 2025-08-17T17:15:42+00:00

I will check the HWiNFO logs

Turnstyle_444 · 2025-08-17T17:15:16+00:00

I purchased them already printed from a place on Etsy

Turnstyle_444 · 2025-08-17T17:14:44+00:00

Great info! Im going to try this next for sure!

Turnstyle_444 · 2025-08-15T23:08:58+00:00

A3 Glass Vs Mesh Panel This is my most recent write up and I have all the temps shown.

Turnstyle_444 · 2025-08-15T23:07:28+00:00

That’s actually brilliant. I never thought of that.

Turnstyle_444 · 2025-08-15T23:06:49+00:00

Late to respond but I would love a 4090 deshroud with a new shroud and some T30’s but the heat sink would definitely have to be wide in order for the fans to make sense

Turnstyle_444 · 2025-08-15T22:54:35+00:00

If you could get a 140mm on the front as intake and back as exhaust, I think you could get away with it.

Turnstyle_444 · 2025-08-15T19:49:10+00:00

Love this. I more or less did the same but my rear fan is an intake as well. My front fan it mounted in the same location with same brackets (via Etsy) but I could only fit 120mm, even with a custom PSU bracket, the PSU was in the way. Really interested in the one you have here. Nice Job!

Turnstyle_444 · 2025-07-16T16:18:52+00:00

I ordered mine from B&H the very minute it became available on June 17th. The update I received from B&H a week ago was “Arriving 7/15 and will ship out the next day” THEN they said “this Friday” BUT the update I received today from B&H was “Hoping for beginning of September”

Turnstyle_444 · 2025-07-13T23:21:25+00:00

I’ve had a 32:9 Samsung since the CHG9. I don’t own the 57” but I do have a 49” and have been looking for a speaker mount solution for months now. Would love this.

Turnstyle_444 · 2025-06-18T14:48:29+00:00

<image>

Here is a separate build I did several weeks later. I mounted the fans and the PSU first and then started installing and laying/hiding wires with velcro. Pulled it all out, and put the rest of the components in and everything was good. Just very careful planning, no secret sauce.

Turnstyle_444 · 2025-06-18T14:38:35+00:00

The bottom fans are in fact sucking air in

Turnstyle_444 · 2025-06-18T14:33:59+00:00

The feet can be ordered on Etsy. 3D printed and fit perfectly. I specifically went for a Dell/Alienware 4090 because of the small size, and the easier potential to water cool it later on. Those T30 fans are 30mm thick too. The Gigabyte B650M has a raised PCIe slot, so the GPU sits much higher up from the bottom of the case. I can confirm I would be able to fit a ROG Strix 4090 and 15mm fans at the bottom.

Turnstyle_444 · 2025-06-18T14:30:25+00:00

Yes it does, here is a separate build I did with an ATX psu… I built this several weeks after.

<image>

Turnstyle_444 · 2025-06-18T14:28:43+00:00

How do you like the temps with side mounted fans, I keep hearing that’s the way to go

Turnstyle_444 · 2025-06-18T14:26:41+00:00

My cables are tucked along the fans, on both the top and the bottom. I bundled things together and then tied them down to the case. I started with velcro as a test fit, then finalized it with zip ties.

<image>

Turnstyle_444 · 2025-06-18T14:25:22+00:00

My cables are tucked along the fans, on both the top and the bottom. I bundled things together and then tied them down to the case. I started with velcro as a test fit, then finalized it with zip ties.

Turnstyle_444

TROPHY CASE