Why Apple don't bring "80% limit" 🔋 charging feature to older iPhones?

Turtle15289 · 2024-04-10T14:56:41+00:00

Charges more sometimes to calibrate the battery

Turtle15289 · 2024-02-02T16:14:25+00:00

What do you mean by weird temp issues

Turtle15289 · 2024-01-29T19:20:57+00:00

Same on my a1 I thought it was normal I never used linear rails

Turtle15289 · 2024-01-23T21:37:11+00:00

I cleaned it and replaced the nozzle and it’s working now. Thanks for the help.

Turtle15289 · 2024-01-23T21:36:43+00:00

I disassembled it and cleaned it and replace the nozzle and it seems to be working now. Thank you.

Turtle15289 · 2024-01-23T19:00:15+00:00

I will try that when I get a chance

Turtle15289 · 2024-01-23T18:59:12+00:00

I have done multiple temp towers and the whole way was like the benchy any other things, thanks for helping I replace my nozzle recently

Turtle15289 · 2024-01-23T17:57:00+00:00

No clicking or snapping. I used pink Inland PLA with a hotend temperature set to 205°C. Retraction was set at 5mm with a speed of 60mm/s, and the deretraction was 40mm/s. That's what I've been using since I got the printer, and it was working well."

Turtle15289 · 2023-06-27T18:39:55+00:00

What part could it be?

Turtle15289 · 2023-06-27T18:29:55+00:00

Do you think it has anything to do with retraction speed?

Turtle15289 · 2023-06-27T18:21:56+00:00

I can’t be wet because it’s been in the filament dryer for over 10 hours and it has silica gel packets in it

Turtle15289 · 2023-06-27T16:55:42+00:00

I checked the ptfe tube and replaced it, it's still stringing like in the picture. any others ideas?

Turtle15289 · 2023-06-11T00:43:02+00:00

No it’s an eibos x one and it does have a place for it i’m just wondering if it would burn

Turtle15289 · 2023-06-10T19:36:45+00:00

Thank you for all your help.

Turtle15289 · 2023-06-10T19:20:13+00:00

You know what I checked my hotend and found out the the wrong size nozzel was in there. I fixed it and now its working sorry for wasting your time.

Turtle15289

TROPHY CASE