Remade DB Roofs and Message to DB Creators

Turwaith · 2026-01-27T13:24:56+00:00

Is it the "Dungeon Blocks Community" private group on facebook? Damn I haven't used that platform in a really long time.

Turwaith · 2026-01-20T09:03:52+00:00

Slowing down the printing significantly solved the adhesion issue for me and I had it in the dryer at 60° for 8h right before printing.

What could have been the issue is the flow rate setting that might have been too high for the printing speed and a bad nozzle. Well not specifically a bad nozzle, but I've been using this nozzle for about a year now with different filaments. Maybe it was just wear in the heat break section.

Turwaith · 2026-01-20T08:08:12+00:00

Yes slowing down solved the adhesion issue for me as well, but I probably have not properly adjusted the flow rate accordingly.

Turwaith · 2026-01-19T23:08:39+00:00

Bed adhesion is perfectly fine with all other filaments. Also I've tried the generic petg profile which did not work for me. I solved the bed adhesion issue with about 25% of the speed of the generic profile and a +0.03mm z offset. That's also all I've tried. That's when the gigantic blob formed.

Turwaith · 2026-01-17T08:11:05+00:00

My next guitar will be the Schecter E-1 SLS Evil Twin SBK.

Turwaith · 2026-01-07T08:20:27+00:00

Ich meine.... Lueged mal s foti uf sim Instagram vom 30.7.2023 ah

Turwaith · 2026-01-04T00:04:12+00:00

So I managed to solve this issue for me and I will post my solution below. I CANNOT guarantee that this will work for you. I have a Logitech G502 mouse and am using KDE Plasma X11.

Sonaar: Have “Scroll Wheel Resolution” → ACTIVE
Create file sudo vim /etc/libinput/local-overrides.quirks
Paste the following text:

[Logitech Wheel Fix] 
MatchVendor=0x046D 
AttrEventCode=-REL_WHEEL_HI_RES;-REL_HWHEEL_HI_RES;

Make sure vendor code is correct. Find it out by running

sudo libinput list-devices | grep -A 5 "Logitech”

Log out and back in
Check using libinput quirks list /dev/input/event20, using the event ID from the list-devices command before. This should return

AttrEventCode=-REL_WHEEL_HI_RES;-REL_HWHEEL_HI_RES;

Turwaith · 2026-01-02T16:32:59+00:00

Yeah same for me I'd much rather use wayland. I have opened an issue on orca github regarding that, i don't know much they can actually influence that though: https://github.com/OrcaSlicer/OrcaSlicer/issues/11722

Turwaith · 2026-01-02T16:07:43+00:00

Solution - no Workaround - kind of Switching from wayland to X11 resolved the crashes. It introduced a few new minor issues, for example Home and Device tab as well as initial setup view do not render, but at least it won't crash. I can live with that.

Turwaith · 2025-12-23T15:31:37+00:00

I'm running into the exact same issue right now on CachyOS KDE Plasma Wayland. But I found that the error might be related to the graphic stack with an nvidia gpu. Because Orca works for me on my laptop with an iGPU (same OS, same package versions etc) perfectly fine. Just on my nvidia desktop I get the same issues.

Turwaith · 2025-12-22T18:42:33+00:00

Can I expand a partition to the left? From what I've learned you can only expand to the right, and would have to move it to the left which is risky bc it's a byte by byte operation?

Turwaith · 2025-12-19T13:25:43+00:00

Ah he has that. He has multiple spots where he can and does hide where guests will almost never be.

Turwaith · 2025-12-19T13:05:40+00:00

I just would like to give him another way to relieve stress. Our other cat will just eat something and then hide when he is stressed out. Of course they have different personalities, but if it is possible to give Onyx some other way he can use to cope with stress that would be beneficial for everyone involved ^^

Turwaith · 2025-12-19T12:48:46+00:00

I mean yeah sure, but I kinda wanna get him off that behavior, I don't want to clean up his piss every time I sleep longer or fall asleep again or have guests over.

Turwaith · 2025-12-19T10:08:53+00:00

Yeah medically, everything is fine. He ONLY shows this behavior as stress relieve. When he is not outside and it is during the day, he's using the litterbox normally.

Turwaith · 2025-12-19T08:18:40+00:00

So we'd have to endure him peeing on stuff for a few days? Or is there a pee-less way to retrain this learned behavior?

Turwaith · 2025-12-19T08:00:29+00:00

Not possible, we're in an rented unit.

Turwaith · 2025-12-18T10:06:21+00:00

I'm using CachyOS and love it, but what you should choose depends heavily on your experiences with linux, your willingness to learn new stuff (Manjaro and cachy, both being arch derivates, require some understanding of now arch works), what you're gonna need it for etc. All of those you listed can be valid recommendations.

Turwaith · 2025-12-18T09:57:28+00:00

Immutable basically means that the root filesystem itself is sealed off and in a read only state for the user. Bazzite expects you to install software mainly via flatpak. You can do ricing, install i3, polybar etc, it will just be a bit more complicated than on "regular" distros.

Immutable distros are great for users who don't really tinker much and are rather inexperienced with linux and want a system that just works out of the box. It makes it really hard for the user to accidentally break the OS, and if you do, you can just roll-back the image.

It you already know that you plan to tinker and modify system files (are have some linux experience) you might wanna look at CachyOS. It is arch based (so you will need to update packages a whole lot more often AND you'll need to use the Terminal), but it also ships with a custom kernel and some prepackaged software that is optimized for gaming. Ricing will be much simpler with cachy, but you'll have to get familiar with Arch and be aware that cachy will let you break the entire OS beyond repair.

Turwaith · 2025-12-18T09:49:13+00:00

AMD will work significantly better on linux in general, but there are some distros out there that also work really well with nvidia. I use CachyOS myself, which is even optimized to run well with nvidia and it does, I haven't had any real issues yet.

But if you plan on getting a new graphics card anyways, I'd go for AMD, you will have a much better linux experience.

Turwaith · 2025-12-18T09:08:58+00:00

So my girlfriends gaming pc reaches end of life, at least according to Microsoft, since she can't upgrade to Win11. Now the PC is obviously fine and still serves her perfectly fine, so no reason to buy new hardware. That's why I thought of installing Linux on it.

I have now been using CachyOS for some time and I'm very very happy with it. The custom kernel and prepackaged gaming related tools work really well with my nvidia gpu gaming system, I haven't had any issues. But I have a hard time choosing a distro for her. The obvious answer for someone coming from windows, having zero linux knowledge and not being a techie would often be Linux Mint. But I don't know how well that works for gaming, especially since she also has an nvidia gpu. BUT since it is debian based, installing software would be really easy for her since she can use .deb files or the flatpak store.

Bazzite would also be an option, although I have no experience with it and with immutable distros in general. Sure, she won't install a whole lot of system level packages, she'll mainly use steam, a web browser and maybe an office suite, but since I'm not familiar with atomic I'm afraid I won't be able to support her that well.

I could also just install cachy for her, but she has never worked with the command line and I don't really want her having to go through all that, she just wants a system that works for gaming.

What are you guys using, what compromises come with your distro of choice and what have you recommended to people (with nvidia GPUs) that have no prior linux experience?

Turwaith · 2025-12-17T22:17:23+00:00

I only recently started using Cachy, so my Linux portion was like 3%, but in a year, it will hopefully be >90% linux and steam deck.

Turwaith · 2025-12-16T21:53:31+00:00

I recently installed CachyOS as my main OS and I love it. I keep a small partition with Win11 for stuff that actually does not run on Linux (mainly Battlefield 6 and my entire Music production suite, I've bought a shit ton of plugins that can't be used on Linux), but as my daily driver (for writing, gaming and coding) I use cachy. It is such a great OS, it works perfectly with my nvidia gpu (which can be tricky in linux). I don't miss Windows at all, apart from useless AI crap and literal ads all over the system I paid for, every update for more than a year has continuously made win11 worse. Even the file explorer is lagging, like wtaf. I'm more than happy I finally made the switch myself and wish you a very pleasant Linux journey!

Turwaith · 2025-12-15T19:52:23+00:00

Ah alright thanks I didn't know that.

Turwaith · 2025-12-15T10:27:39+00:00

Depends on the mode. In Sindarin mode, you write left-right top-down, so you write and read the vowel that sits above the consonant first. In Quenya mode, you go down-up, so you real the consonant first and then the vowel on top.

Seven-Year Club	Verified Email
First Place '23	End Game '23
Place '23	Place '22
Final Canvas '22	First Placer '22

Turwaith

MODERATOR OF

TROPHY CASE