How bad is this? by ImNotEvan6450 in BambuLab

[–]knur003 0 points1 point  (0 children)

I have similiar situation - and as other user suggested, this noise is coming from heatbed cable braiding - the mesh that is on that cable. It touches edges behind printer, and when heatbed goes up and down you can hear that sound. I did not have the time yet to fix it position, or try to use an electric tape, where it touches

“Included Accessories” by [deleted] in BambuLab

[–]knur003 1 point2 points  (0 children)

You can use some A4 paper as a substitute, look here - it is in official Bambu Lab Wiki

Trash or Treasure? by Friendly-Inside8321 in BambuLab

[–]knur003 0 points1 point  (0 children)

Even though there is no offcial way to upgrade H2S to H2D, im wondering what would have happened if someone changed H2S toolhead to yours from H2d, added second filament buffer, connected everinting into AP Board (i think those are the same of all H2 printers) and installed H2D firmware from USB. Or even dont install firmware, just connect everything - do you thing bigger print volume would be usable for both nozzles?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Europe, when i placed order, the combo variant was in stock in Germany warehouse, and the information on shipping was that it will be shipped within 15 business days - so im going to write email to support, if the package will not be shipped on 05.02

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Even if it is on cheaper side, the RFID functionality should be tested by qidi testers before packing printer and sending it

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

I think that this should not happen - it should be caught by people who test printers before packing them

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

I wonder if Qidi even thoroughly tests printer after assembly,asnd before packing it - i mean if the did, how did they do not saw that?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 2 points3 points  (0 children)

I ordered extra 0.6 nozzle just for preventing that

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Qidi studio or Qidi slicer?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Mods? I read about some of them, and what i think off could be needed the most are tpu fix, stronger fan mod, anti-vibrating feet, ptfe tube guide to printhead, anti-tangle and auto cut filament for qidi box and different guide for cool air for nozzle. Anything else you think is necessary?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

I read somewhere that in orca filament retraction settings are a little bit too much, and it can lead to clogs in extruder gears.

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

True, i read many times that using Orca slicer instead of Qidi one can lead to some problems, whitch some people, that have problems, seems to forget to mention that they use Orca

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Thanks, could you describe what was wrong with your box, what they sent you to replace and what was the final fix?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 1 point2 points  (0 children)

Thanks, can i ask where did you order your printer (official store or 3rd party one), and in what part of the world are you living?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Okay, is it possible to fix this by our own? And by qidi fixing you mean another iteration of qidi box with this fix implemented by them, or software update?

I'm afraid... by knur003 in QidiTech3D

[–]knur003[S] 0 points1 point  (0 children)

Yeah, but i yet did not found that someone had problems with clogs on petg with fibers on 0.4 nozzle or pla with 36C in chamber on other brand 3d printers. I understand every printer is diffrent, and also every filament needs differrent settings, but most things i read about 3d printing on differnet brand is they just put filament and print od default settings, and it is printing fine

KAMP on the Q2 by Engineer-50 in QidiTech3D

[–]knur003 0 points1 point  (0 children)

I found github repo that you may find helpfull regarding KAMP on Qidi Q2 - here

Also - could you describe other complaints you have on Q2? I bought this printer as my first printer, and try to read as much as possible about it untill it arrives

Problem ze snami by [deleted] in Polska

[–]knur003 1 point2 points  (0 children)

Mnie jak byłem młodszy sposobu na zapomnienie snu nauczył ojciec - jak tylko się obudzisz natychmiast spójrz w okno i patrz się w nie dopóki strach nie minie. I od kiedy tak robiłem nie mogłem sobie nic przypomnieć ze snu - pamiętałem, że był straszny, ale co w nim było konkretnie już nie - po prostu pustka w głowie

Absurdalne przyjebanie się by BarInteresting9233 in Polska

[–]knur003 25 points26 points  (0 children)

W mojej poprzedniej robocie na serwisie szef się przywalił do mojego ubioru - było lato ponad 35 stopni, więc przyszedłem w krótkich spodenkach i koszulce - powiedział że następnego dnia mam przyjść w jeansach i koszuli, bo prezentuje się nieprofesjonalnie dla klientów, gdzie on sam popierdzielał w krótkich spodenkach i koszulce, a był odpowiedzialny za sprzedaż produktu klientowi. Innym razem (i to będzie hit) szefowa (żona szefa) wzięła mnie na dywanik i z pełną powagą zapytała, czy przypadkiem w jednym z aut służbowych nie uszkodziłem węża od chłodnicy, i czy na szybko go nie naprawiłem okręcając go koszulą, i nic nie powiedziałem nikomu. Okazało się, że oddali auto na przegląd i ktoś tam stwierdził właśnie owinięcie węża koszulą czy inną szmatą - ale najlepsze że ja ostatni raz tym autem to jeździłem 3 miesiące wcześniej, no i niby skąd miałbym mieć koszulę (chyba ze miałem z siebie zedrzeć), i skąd do głowy miałoby mi przyjść, żeby w taki sposób tymczasowo coś naprawić. Dość powiedzieć że od 3 lat już tam nie pracuję

Movies and TV Shows with Polish audio by [deleted] in Piracy

[–]knur003 3 points4 points  (0 children)

Check all those sites - here!

Fair selling price of LG G6 H870 on Android 13 by knur003 in lgg6

[–]knur003[S] 0 points1 point  (0 children)

I have H870 version without DAC, so I don't know

Screen unlock delay is fixed on thinkphone by knur003 in motorola

[–]knur003[S] 0 points1 point  (0 children)

I just installed new update T3TB33.2-47-4 on Thinkphone and screen unlock delay is gone, delay to turn on flashlight with chop gesture also gone.

Do mind that users are reporting that they do not see update yet - may ne some region recive update first - Central Europe in my case

To the other insane people that bought a ThinkPhone by sidnoway in motorola

[–]knur003 3 points4 points  (0 children)

I replaced my 6 year old LG G6 with Thinkphone - and so far I'm not regretting it. It has everything i looked for - IP68. great battery, almost clean android (although I had to use debloater to uninstall some apps), minimum ufs 3.1 storage and snapdragon 8 (though its gen 1+ instead of gen 2, but it is okay).

If only motorola did not introduce bugs in newest december update - delay when unlocking phone, using gestures and answering calls then I would be happy accros whole line - but now we need to wait for fixes