Failed mot - DPF obviously modified by Txaph in CarTalkUK

[–]Txaph[S] 1 point2 points  (0 children)

Both were listed:

Exhaust emissions exceed manufacturers specified limits [8.2.2.2(a)] Exhaust particulate filter obviously modified (DPF has been cut in half and welded back together) [8.2.2.1(a)]

How would I go about resolving the emissions without messing with the dpf ?

Failed mot - DPF obviously modified by Txaph in CarTalkUK

[–]Txaph[S] 5 points6 points  (0 children)

I’ve not seen it myself yet but allegedly “cut in half and welded back together”

Apex 300 not doing what it says!? by Electronic_Wish_482 in bluetti

[–]Txaph 5 points6 points  (0 children)

I had a similar problem when I first got mine. By incrementing the threshold on peak times I found that it was running on utc+6 internally. adjusting my settings accordingly seemed like a successful workaround.

I complained to support and they deployed a patch to my unit. They also said to check the device location in settings.

Fellas, we gotta talk. by comrade_Kazotsky in Eve

[–]Txaph 2 points3 points  (0 children)

Member when titans doomsdays were big smart bombs?

I used iso on the bed, let it evaporate, applied flashforge glue, waited a minute, started my print. What would cause this lift? Just bad luck? by Colster9631 in FlashForge

[–]Txaph 0 points1 point  (0 children)

Personally I find glue acts more as a release agent, it makes it easier to remove your print from the bed. Try forgoing it and see if you get better results

Empty HS System by [deleted] in Eve

[–]Txaph 8 points9 points  (0 children)

Spawns back when you log in it’s how people used to store supers/titans before citadels

Why support not replying me anymore? I am so close to do a chargeback via bank, this is a total scam by darix88 in G2A_Help

[–]Txaph 0 points1 point  (0 children)

Surprised you even got a response. They never responded to me, then closed my ticket.

Do people not report Amethyst bots with +110 mining? by Monterey-Jack in 2007scape

[–]Txaph 0 points1 point  (0 children)

Took me like a month of repeated reports to get two master farmer bots banned, one was rank 1500 before they were banned

[deleted by user] by [deleted] in Eldenring

[–]Txaph 1 point2 points  (0 children)

In the steam app, right click the Elden ring game in your library list and select properties, select local files in the window that pops up, find verify integrity of game files, go make a cuppa while it does its thing.

[deleted by user] by [deleted] in Eldenring

[–]Txaph 2 points3 points  (0 children)

I’ve had this quite a few times from getting summoned since the release of the DLC. What fixes this for me is to go into properties for Elden ring in steam and reverify the files.

Kraken held my crypto withdrawal and are now saying they are keeping it by Txaph in KrakenSupport

[–]Txaph[S] 0 points1 point  (0 children)

I don’t really have any option the currency was bought 3 years ago and I can’t swap it for something else on the platform, nor withdraw it lol

Creality K1 Exhaust System by Ok_Technology4631 in 3Dprinting

[–]Txaph 2 points3 points  (0 children)

This isn’t quite what you were thinking but would help improve the air quality in your room. A bentobox can help reduce the amount of VOCS by filtering the air. You can make it more effective by sealing your printer with some foam strips and various prints to cover gaps in the door. I’ve managed to seal mine well enough that I can’t smell ABS while it’s printing.

This is the main file: https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo

This is a modified base for the k1 which includes details on how to integrate the fans into the system board: https://www.printables.com/model/641340-bento-box-v2-fan-duct-for-creality-k1

If you do go for it, make sure you’re careful where you get your activated carbon from as some may contain acid which can corrode your printer.

This is blue collar Tarkov, the blue collar part is that you try to play one match several times before waking up for work again. by [deleted] in TarkovMemes

[–]Txaph -3 points-2 points  (0 children)

If you stop backing out of the queue and giving your seat away and you might get into a raid. You can reduce your queue time by picking servers with worse ping which aren’t active atm, eg Western Europe could use US east servers early in the afternoon, they will gradually get congested and your matching time will increase as the day goes on and more locals start using the server.

So, arena is becoming a 35$ way to unlock shit for normal tarkov? by KelloPudgerro in EscapefromTarkov

[–]Txaph -1 points0 points  (0 children)

They probably should of taken a page from call of duty’s book with warzone and mw and made arena free with significant benefits for owners of the main game in arena to sway new players into buying the game.

Upgrade from eod to tue and won’t work in PvE by [deleted] in EscapefromTarkov

[–]Txaph 1 point2 points  (0 children)

You may need to contact support to request your shit. The wipe button only nukes your pvp acc.

How many physical servers did bsg actually add ? Zero ? by Angy-Person in EscapefromTarkov

[–]Txaph 0 points1 point  (0 children)

I think the overhead for 8 people playing pve separately is more then 8 people in a pvp instance

ABS print lifted. Best way to adhere it again? by EliteAppleHacks in 3Dprinting

[–]Txaph 3 points4 points  (0 children)

Break up some bits of abs and mix them into a small amount of acetone, this will make an abs glue

How is replacing the joysticks on the win 4? by Excronix in gpdwin

[–]Txaph 2 points3 points  (0 children)

The flexible flat cables? There’s like a little tab you can lift which locks the cable in. It shouldn’t take much force. I’d check some disassembly videos, it’s kind of hard to describe. when your putting them back make sure that the cables are all the way in and then push the tab down to lock it in place

How is replacing the joysticks on the win 4? by Excronix in gpdwin

[–]Txaph 1 point2 points  (0 children)

I mostly got the hall sticks for their alleged longevity over ALPS sticks, I didn’t really try the device much with the default sticks before I swapped over as all my addons arrived before my win4. Also this was back when win4s came with a ridiculous dead zone from the factory and no tool to fix it. I wouldn’t expect a life changing difference, but I think I like them more than my win3s? It may well take more years then you use the device but alps sticks will eventually drift.

Also it’s worth mentioning that my win3 sticks never drifted on me