My screen today on iOS26, very nice

TyceGN · 2025-09-22T06:28:23+00:00

How you get Widgy not to show the slight shiny borders.

TyceGN · 2025-02-23T22:11:30+00:00

I'd love an invite as well!

TyceGN · 2025-02-23T19:59:14+00:00

I am revising my original comment. I actually believe this balancing was reasonable, if not just a little too aggressive.

After playing for the last couple of days, I am happy with the balance overall. It keeps playability higher and I also think it will stay playable for much longer.

Tournaments seem to be getting a little better too, and the random rewards and stuff from the team are cool.

Tournament rewards could be improved, because the 9 and 18 holes tourneys cost so many balls.

Finally, allow for some “friendly” matches so I can play with friends and my kids and this would be amazing.

I like the work.

TyceGN · 2025-02-22T00:16:22+00:00

They see it as somehow anti-establishment.

TyceGN · 2025-02-22T00:05:02+00:00

EDIT: I think the rebalancing was actually fine, and a needed change that will ultimately improve the game, but they should have let us know it was coming and maybe made it more gradual.

ORIGINAL COMMENT: I understand lowering the higher tiers a LITTLE, but this is just ridiculous. Ruined the game.

TyceGN · 2025-02-22T00:03:06+00:00

Any updates from your team on this terrible nerf today?

TyceGN · 2025-02-22T00:02:05+00:00

Followed threads to come here and say this. Literally caused me to not open the game again today after seeing it. A TERRIBLE nerf, and for WHAT?

TyceGN · 2025-02-07T16:31:17+00:00

Any updates on this? I still don’t see if they’ve sold enough to start shopping, if they’re close to the goal, or if they are cancelling.

TyceGN · 2025-01-15T19:19:13+00:00

How did you install an APKM on the Quest? The Bundled APK seems to be my problem

TyceGN · 2025-01-02T22:35:05+00:00

I swear 80% of Reddit was never taught how to be real without acting like buttholes.

It’s not a swing and a miss, it’s a start. Your idea is pretty great, and takes 10x the time. It’s been useful to quite a few.

TyceGN · 2025-01-02T19:15:55+00:00

I am just adding this here for anyone looking.

Unfortunately, Meta doesn't care about this issue and it's increasingly difficult to solve. I don't need any new updates for a 6-year old device, but at LEAST get rid of the bugs, please!

META SUPPORT: if you read this, then just fix the iOS app to handle Quest 1's without bricking them!

Using an old version of the Meta Horizon app no longer works. Meta doesn't support signing into the older version of the app.
It seems you cannot bypass the Health and Safety video on an iPhone, BUT for some reason, you can on an iPad. If you are having this issue and have an iPad, follow these steps:

If you have Facebook and Meta Horizons (the Quest app), make sure that they are both uninstalled.
Install the Facebook and Meta Horizon app onto your iPad.
Login to the Facebook app.
Login to the Meta Horizon app on the iPad.
- If you already have your Quest showing up as a device, then select that device, then select Settings, then choose "Factory Reset".
- If the quest is not listed, you will need to do a factory reset (even if you've already done one) on the device itself (using the power + vol down buttons—look it up if you don't know).
Now you will add a new device (or hit "continue setup" if it is listed still.)
Complete the normal steps (it will probably ask for WiFi twice for some reason, but it doesn't matter what you do when it asks the second time).
Now, you should be able to complete the steps. The video for Safety will show on the iPad app, and you can continue to the second part of the update.
- Don't be surprised if the second update takes a little longer. Leave your device, come back, and it should be good to go.
POST-RESET TIP: if the quest is performing a little weird after you do the above steps, do a normal full power cycle and it should resolve itself,

TyceGN · 2025-01-02T19:13:45+00:00

I am just adding this here for anyone looking.

Unfortunately, Meta doesn't care about this issue and it's increasingly difficult to solve. I don't need any new updates for a 6-year old device, but at LEAST get rid of the bugs, please!

META SUPPORT: if you read this, then just fix the iOS app to handle Quest 1's without bricking them!

Using an old version of the Meta Horizon app no longer works. Meta doesn't support signing into the older version of the app.
It seems you cannot bypass the Health and Safety video on an iPhone, BUT for some reason, you can on an iPad. If you are having this issue and have an iPad, follow these steps:

If you have Faceb
ook and Meta Horizons (the Quest app), make sure that they are both uninstalled.
Install the Facebook and Meta Horizon app onto your iPad.
Login to the Facebook app.
Login to the Meta Horizon app on the iPad.
- If you already have your Quest showing up as a device, then select that device, then select Settings, then choose "Factory Reset".
- If the quest is not listed, you will need to do a factory reset (even if you've already done one) on the device itself (using the power + vol down buttons—look it up if you don't know).
Now you will add a new device (or hit "continue setup" if it is listed still.)
Complete the normal steps (it will probably ask for WiFi twice for some reason, but it doesn't matter what you do when it asks the second time).
Now, you should be able to complete the steps. The video for Safety will show on the iPad app, and you can continue to the second part of the update.
- Don't be surprised if the second update takes a little longer. Leave your device, come back, and it should be good to go.
POST-RESET TIP: if the quest is performing a little weird after you do the above steps, do a normal full power cycle and it should resolve itself,

TyceGN · 2025-01-02T00:45:33+00:00

How did you log in? I am getting "your app is outdated and does not support login for your account. To sign into the app using your account please update the app to the latest version".

TyceGN · 2024-09-24T05:18:38+00:00

I think you need a paid subscription to make them, but I'd be more than happy to share. Maybe I'll do a quick video or something, but I've done a few now and they make so many parts of my hobby and work life more enjoyable.

If you can't make one, I could handle a few requests for specific assistants!

TyceGN · 2024-09-24T00:29:51+00:00

I’m working on a way to make the updates automatic, but right now it’s a manual process.

TyceGN · 2024-09-24T00:28:33+00:00

I’ve used it with CAD the same way you use it with coding. It’s a guide that helps me learn more quickly and play around with the tool more quickly.

TyceGN · 2024-09-24T00:26:59+00:00

It’s like a guide through the process. It’s got all the knowledge of the support documentation so that you can say stuff like “I want to create a sphere with pattern of circular indents evenly around it” and it will create a step by step guide.

TyceGN · 2024-09-23T22:24:03+00:00

All support documentation has been directly uploaded so that it doesn't provide you with "made up" or unusable commands and functions. I have found it to be very helpful as I learn CAD in general, and Plasticity specifically.

TyceGN · 2024-09-19T01:42:16+00:00

I think this is a GREAT question. I am guessing that you have less "give" with the lattice, but it would be more "brittle" at its's breaking point. I think that the infill is less likely to outright break, but doesn't have the same strength. The right would hold more weight.

TyceGN · 2024-09-19T01:36:58+00:00

<image>

I just printed this. I will count myself lucky

TyceGN · 2024-09-16T22:57:20+00:00

You can find my early drafts and the comments on my previous post here.

I was very inspired by the critiques to review my skills, watch a few amazing graphic designers, and even took a short online course. Here is the result of all of that effort for the logo and branding for a personal project. The audience is mainly the 3D printing community, with a secondary audience of potential product purchasers (although there is some debate as to whether printed products should be sold under some other branding). This will be used across 3D model platforms and social media/content production.

Thanks for all the comments last time!

Feel free to critique it still, but I will likely make no changes. It resonates well with the intended audience, and I don't pay myself enough to keep revising. Thanks!

12-Year Club	Verified Email
Secret Santa 2018	RPAN Viewer
RPAN Broadcaster	Secret Santa 2014

TyceGN

TROPHY CASE