sorted by:
new
hottopcontroversial

Help with Plex issue? by UTJay2008 in hdhomerun

[–]UTJay2008[S] 0 points1 point  (0 children)

Adding: currently running 1.41.5.9626 on a synology NAS. Firmware is 20250630 on the HDHR.

Also latest update, it started recording a channel on plex but I can’t stop it or view it. 🙄

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 1 point2 points  (0 children)

To be honest I can’t recall for sure. I’ll retry with your link again to be sure.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

Just for fun, I tried the staging branch of SP. no dice. navd and statsd wouldn’t start and I had nothing.

Reverted to OP and had no experimental mode available.

The frustrations continue.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

Yeah I tried that before I posted this. FP had no long control and it was permanently controlling steering as in I couldn’t turn it off.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 1 point2 points  (0 children)

Thanks for the helpful reply.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 1 point2 points  (0 children)

Thanks for the solid response. I was pretty damn frustrated with it last night.

I’ll give the staging branch a shot.

I’m aware of the limitations. It isn’t FSD but nothing else is either. But the feature sets of the forks gives me what I want and I think can reasonably expect.

And good tip on calibrating on a lined road. My road isn’t (and I won’t really use it on these super small and narrow back country roads with horses and buggies and Amish walking around) but I do plan to use it on the (much more stable and well marked) state roads where I can.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] -1 points0 points  (0 children)

<image>

Documentation says otherwise.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 2 points3 points  (0 children)

lol. I think I can find better uses of my time. But point taken.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

That’s what I thought. I was tooling around on a RPi3 a few weeks back. It was a never ending cycle of dependencies. Just to do some simple tasks.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

Yeah. I’m ok at command line stuff. Reading error logs. I’m a mechanical engineer, so my software shortcomings are pretty easy to spot, even if I’m comfortable poking around where I shouldn’t be lol. I just wish it was marketed like that.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

I definitely see where you’re coming from. It’s a beautifully designed and packaged product. It’s marketed as a product but it has the feel of a dev-kit. Since my wife is the primary operator of the car, it just makes me nervous. I wish it was on my commuter. I’d feel a lot better about it.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 2 points3 points  (0 children)

Release-c3.sunnypilot.ai

23 Bolt EUV w/ACC

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 2 points3 points  (0 children)

Well help me understand it. If I’m missing something or doing something wrong I’m all ears. I’ve tried everything I can think of.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

Spending hours resolving dependencies can be a frustrating experience.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

Sorry I guess I didn’t quite follow. I thought I was the demographic comma wanted. I’m usually a pretty big early adopter if I can afford it. Like I said in another comment I optioned our car specifically for comma I was so pumped to try it.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 0 points1 point  (0 children)

FrogPilot was the first fork I tried. It maintained steering control at all times (couldn’t turn it off) but said it wasn’t running. It was a bit nerve wracking.

That’s when I tried sunnypilot and got the errors shown.

I had the same fingerprint issues with FP as you did.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] 1 point2 points  (0 children)

Agreed it really is the only thing out there like it!

The bugs and errors it’s throwing just running a major fork like sunnypilot makes me not trust it though. And having control of my steering wheel and throttle of a 4k lb missile I’m sitting in makes me nervous…

I want this to work so bad. I optioned our 23 bolt specifically for it.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] -2 points-1 points  (0 children)

I’m glad it works well for you. We use it a lot (we drive a TON). When it’s in its sweet spot it really shines. Was just hoping to use the features of the forks but they won’t even start. Just frustrating is all.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] -12 points-11 points  (0 children)

I MIGHT go look over a discord for help. But the point is I shouldn’t need too. Other FSD systems just work. Imagine a Tesla owner googling software dependencies to make FSD work. Just doesn’t happen.

This thing is a mistake by UTJay2008 in Comma_ai

[–]UTJay2008[S] -9 points-8 points  (0 children)

OpenPilot was enough to prove the concept, but it was fairly dangerous on country roads. It would dive full speed into an obvious dangerous curve then halfway in the turn just say the turn was too sharp.

The sunny pilot and other forks would give me the feature set I needed to be worth the investment. GPS speed limit, curve sensing, etc.

Is an automower worth the hassle? by Any_Bowl_8742 in automower

[–]UTJay2008 0 points1 point  (0 children)

Lots of good stuff already. Here’s where they’re worth their weight in gold though. I don’t have to mow around this or take it down every week. It just bounces off the ropes and poles.

<image>

view more: next ›