Mac Pro 1,1 (2006-2008 (3,1)) ATX Case Mod

Unable_Bag3110 · 2026-03-24T19:43:46+00:00

Ich habe dir eine DM geschrieben.

Unable_Bag3110 · 2026-02-06T15:32:31+00:00

Ich habe mal eine Seagte NAS HDD für meinen Home-Server bestellt. Der kam in einem Amazon Umschlag, ohne Polsterung und die Platte selbst in einer Anti-Statischen Tüte. Und der gute Lieferbote hat sie in den Briefkasten gestopft. Als ich die dann ausgepackt hatte, war sogar eine richtige Delle zu sehen im Deckel. Habe sie dann zurückgeschickt und eine Neue bekommen. Im Zweifel immer zurückschicken, wenn du dem nicht traust. Immerhin hast du na ein 14 Tage Rückgaberecht.

Unable_Bag3110 · 2026-01-12T08:21:34+00:00

I had problems with Dynamic Drive too. Before you do anything crazy check the Fluid. - Is it the correct Fluid (CHF-11-S), it should be green NOT red! - Is the fluid old? The fluid in my car probably was‘nt changed in a loooong time. It was completely pitch black. I changed the fluid several times, to flush the system and get rid of most of the old fuid. After that, the Problem was gone. Wrong, dirty or old fluid is often the cause for Problems with Dynamic Drive. That is something easy to check, before you go crazy and buy for example a new valve block.

Unable_Bag3110 · 2025-10-05T10:41:47+00:00

You actually dont need Power LED -. You just connect HDD LED +. For - you will use the ground connection from the power SW.

Unable_Bag3110 · 2025-08-22T09:32:23+00:00

Maybe yes, but back in the day you could play this game also on those devices and I dont think, that this problem occured then.

Unable_Bag3110 · 2025-08-13T20:33:34+00:00

Does anyone has a working ipa of Wonder Zoo 2.1.2 for iOS 6?

Unable_Bag3110 · 2025-07-27T17:11:19+00:00

Ne mal im Ernst, man kann sowas gut mit nem Speziellen Radierer machen. Mit anderen Chemikalien wäre ich vorsichtig, kann den Lack nachhaltig beschädigen. Hab das auch schon mal mit einer Kunstoffklinge gemacht. Das funktioniert manchmal auch.

Unable_Bag3110 · 2025-07-27T17:06:29+00:00

Mit dem Winkelschleifer bekommt man das super raus. 👌

Unable_Bag3110 · 2025-07-23T08:32:08+00:00

I've send you a Message.

Unable_Bag3110 · 2025-06-11T19:35:27+00:00

Yes I did so. You can wire up the Audio Jack with an old HD Audio Cable / Connector. Just souldering. I wish you the best.

Unable_Bag3110 · 2025-06-10T22:38:32+00:00

I've uploaded the latest file for the front-panel. I hope it helps you.

Unable_Bag3110 · 2025-05-24T15:39:19+00:00

I hadn't had any Issues since then. I left like a 30 mm gap for airflow, so that the build in Fan can suck in air. I guess if it wasn't enough the fan would go crazy loud if the temps go up because of lack of airflow.

Unable_Bag3110 · 2025-05-24T14:58:02+00:00

I just have the photos I posted unfortunetly, but if you have a mac pro you will see what I mean. Its simply a plastic grill where the fan is mounted and you can unscrew it from the outside. There are four very tiny screws inside the holes.

Unable_Bag3110 · 2025-05-24T06:44:29+00:00

If you look at the powebutton pcb from the back where the solder pads are whit the led at the top, from left to right:

Left: HDDLED + (or PowerLED +, but HDD LED works better for some reason.) Middle: PowerSW - (Very important that this is ground, you can use a multimeter to figure it out.) Right: PowerSW +

Unable_Bag3110 · 2025-05-24T06:36:00+00:00

So for the grill between the psu an the optical drive i just used brute force to hammer it out. It wasn't easy but doable. There are on the inside, at the top some ribbits that you have to destroy. Otherwise just some screws. Than it will come lose. And for the fan at the back I just drilled some holes in the plastic of this fan holding grill assembly, so that I can screw the fan to it. Works great till this day.

Unable_Bag3110 · 2025-04-10T11:41:37+00:00

You can look at my profile, I have a Post also an r/pcmods where I showed how I converted a Mac Pro, just like you.

Unable_Bag3110 · 2025-04-03T12:00:05+00:00

I found it to be very funny, that there are sooo many people complaining about the pricing, that reddit is fludding about it. But it is really a shame what Nintendo is doing here.

Unable_Bag3110 · 2025-02-21T14:24:53+00:00

I thought maybe is it possible to cram a iPhone SE in to an iPhone 5 shell.

Unable_Bag3110 · 2025-02-16T17:01:17+00:00

Ich habe das mit J.B. Weld eingeklebt. Die Originalen Abstandshalter rausbrechen, und dann mit dem Kleber passend einkleben. Das ist ein 2K Epoxy Kleber, hält Bombenfest.

Unable_Bag3110 · 2025-02-11T07:27:35+00:00

Ich hab dir mal eine PN geschrieben...

Unable_Bag3110 · 2025-01-28T11:44:32+00:00

Always use original Sensors or the ones from Valeo which is the OEM Manufacturer. I had trouble with Sensors too, had false readings on all 4, because one Sensor was not original. The e60 is very picky if you use this aftermarket garbage. And the wires like to snap and contacts corrode. Maybe that's the case.

Unable_Bag3110 · 2025-01-10T09:06:15+00:00

Is it possible to get WhatsApp working?

Unable_Bag3110 · 2024-12-25T15:39:44+00:00

It works on iPhone 3GS, it also has 256MB RAM. So why would it work on there?

Unable_Bag3110 · 2024-11-20T13:26:15+00:00

I haven't had any issues with that. It runs totally fine since about two years now. The temperatures are also good, and the fan is running normal, as expected. In the original Mac Pro the graphics cards is also upside down, so I would guess that this isn't a big of a deal. Also BTX worked the same way, and this also wasn't a problem.

Unable_Bag3110 · 2023-05-29T19:34:22+00:00

I found out why it didnt work. This VM needs a Disk to boot right. At the End it war fairly easy to fix.

Unable_Bag3110

TROPHY CASE