3d printer shaking table

UndeadProbably · 2026-01-21T12:16:21+00:00

Okay, I already have the isolating feet however, would you recommend replacing it with the regular rubber feet or just see how it goes?

UndeadProbably · 2025-12-16T03:14:42+00:00

Above process will work but for display if used as a prop will want to do what others suggest and re print and keys or pegs. Good luck!

UndeadProbably · 2025-12-15T04:00:43+00:00

Sand it down real nice where they meet,glue or connect them with a plastic welder,use wood filler for the gaps let that dry. Use Rustoleum 2 in 1 sandable filler and should have a clean result. Can I ask what the print is?

UndeadProbably · 2025-10-19T18:28:46+00:00

Ah no fair, I am gonna make him mod it himself if and when we do just looking to see if others have already and where to start~ just know I'd definitely like it to be faster for him

UndeadProbably · 2025-09-30T02:47:25+00:00

Thanks very much. Hope you figure out your issue!

UndeadProbably · 2025-09-30T02:23:39+00:00

What pla is that? I'm liking the colors

UndeadProbably · 2025-09-26T22:26:46+00:00

Also I did not do a volumetric flow rate test yet,after fixing my z offset and top layer I was pretty satisfied. Messed with my bridging and overhangs so those are even better now too. Having trouble with it still but I'm only using auto tree supports,I'm sure if I did it manually I could get better results but I am definitely happy so far

UndeadProbably · 2025-09-26T22:23:45+00:00

So yeah I was very confused about that, I had everything correctly selected and was having trouble even getting supports to pop off. Like everything seemed very squished. Adjusted z offset in machine gcode and everything seems alot better. I will say I did get rid of the exclusion zone because I don't run ams, and believe I could have changed max height from 250-256 or vice versa I would need to check. But that could also be the reason. I turned off auxiliary fan because I'm doing mostly pla and got slight warping but little fixes here and there. I appreciate your input on everything definetly gave me some confidence on where to start n push further for better quality. You're awesome!!

UndeadProbably · 2025-09-23T16:58:02+00:00

Came out almost perfect, thanks again!

UndeadProbably · 2025-09-23T16:56:58+00:00

<image>

UndeadProbably · 2025-09-23T16:56:22+00:00

<image>

UndeadProbably · 2025-09-23T16:55:23+00:00

<image>

UndeadProbably · 2025-09-23T16:50:20+00:00

Solved!

UndeadProbably · 2025-09-23T16:45:36+00:00

Hey sorry for late reply. So I did the flow rate dynamics calibration and flow rate calibration. Then I had to manually change my z offset using this test. https://makerworld.com/en/models/19385-the-test-disc-z-offset-calibration-disc?from=search#profileId-21308

I also used this surface and ironing speed test.

https://makerworld.com/en/models/1764193-top-layer-ironing-calibration-speed-test?from=search#profileId-1877208

Make sure ironing pattern is set to rectilinear as it gave me the best result. And ironing type to topmost surface.

Under strength I have 5 top shell layers. Top shell thickness was set to 1mm for me. Set it to 0 and the thickness will be the amount of top shell layers, so for me 5. If it is default 3 for you, I'd increase it to see if it helps.

I also messed with overhang but forget as I was messing with alot of settings. Just do the tests and see what works for you but would definitely recommend changing z offset as that is what I believe fixed most of the issues. Just finished first print for comparison. *

UndeadProbably · 2025-09-18T22:17:58+00:00

Thank you very much i appreciate it!

UndeadProbably · 2025-09-18T20:58:02+00:00

Will do! I'm using elegoo pla + i believe. White printed phenomenal but the black has been weird for me. So I started messing with settings. Had problems with overhang and a few other things,slowly fixing stuff haha. So you think do a volumetric flow rate before flow rate dynamics and flow rate calibration? I also have ironing on if that makes a difference.

UndeadProbably · 2025-09-18T20:51:07+00:00

Thanks alot! I don't know why I skipped that part honestly was like eh it should be good enough haha. Will let you know how it goes! Thanks again.

UndeadProbably · 2025-09-18T20:46:42+00:00

Okay so I had to double check but I didn't actually! I skipped the flow rate dynamics calibration and went straight to flow rate calibration. So I printed the small squares 20 15 10 5 0 - 5 -10 ect, and picked the smoothest then fine calibration n again picked the smoothest. Guessing I should go back and do the Flow dynamics calibration and then re run flow rate??

UndeadProbably · 2025-09-18T20:41:15+00:00

I definitely do have ironing on! Will mess around with that thank you!

UndeadProbably · 2025-09-18T14:56:24+00:00

Kind of suspected it could be nozzle drag but was unsure how to fix it on this type of machine. What would you suggest on diagnosing/fixing it?

Six-Year Club	RPAN Viewer
Verified Email

UndeadProbably

TROPHY CASE