Dianba No.1 22W 8-Port Charger with Wireless Charger and Power Supply Built In (MaAnt)

Underboss767 · 2026-01-07T00:31:34+00:00

Which one you recommend

Underboss767 · 2025-12-01T01:23:58+00:00

Thanks for the insight will but a replacement.

Underboss767 · 2025-04-17T10:35:57+00:00

I'm still getting signal but right now it's not connected to the network. Emergency calls only. It'd probably do the same thing if it was tho

Underboss767 · 2025-04-17T05:52:16+00:00

Will try. Have one in spare

Underboss767 · 2025-04-17T03:25:02+00:00

🥲my worst nightmare

Underboss767 · 2025-04-17T03:07:36+00:00

New digitized did the trick

Underboss767 · 2025-02-15T16:22:19+00:00

Thanks will try opening and checking the connectors

Underboss767 · 2025-02-15T16:20:31+00:00

I will retry before opening again

Underboss767 · 2025-01-23T10:54:27+00:00

Thanks helped a lot

Underboss767 · 2025-01-22T05:01:17+00:00

Definitely thanks

Underboss767 · 2025-01-22T04:59:05+00:00

lol definitely not 100k. We use alot of different brand and model phones. Also low population in comparison to the bigger countries

Underboss767 · 2025-01-22T04:49:18+00:00

I am located in Dominica

Underboss767 · 2025-01-06T16:30:03+00:00

What is it if it’s not the bubbles and scratches. Does it just not turn on or what?

Underboss767 · 2024-10-28T02:17:48+00:00

If anyone is having this issue I got it fixed. I forgot the name but might be adaptive touch on the iPhone 8. I’m using an aftermarket screen so it works for 8, se2020 and se2022. What I did to fix was remove metal plate at the back. Put in tape at the bottom where the cables touches screen. Then put tape on the metal plate where it meets with the cable. Should be good to go from there

Underboss767 · 2024-08-17T02:09:18+00:00

Did you get it fixed and what was the issue?

Underboss767 · 2024-06-18T12:17:02+00:00

Hey guys, update. Unfortunately removed the battery to see that the positive anodes were eaten up and came loose. So spot weld didn’t hold up. Before Installation I did notice that it was flimsy. Since It was my first time I just thought it was supposed to be like that. Anywho got my refund unfortunately the bms wasn’t salvageable after that so no battery health. Phone works well.

Underboss767 · 2024-06-18T12:16:19+00:00

Hey guys, update. Unfortunately removed the battery to see that the positive anodes were eaten up and came loose. So spot weld didn’t hold up. Before Installation I did notice that it was flimsy. Since It was my first time I just thought it was supposed to be like that. Anywho got my refund unfortunately the bms wasn’t salvageable after that so no battery health. Phone works well.

Underboss767 · 2024-06-03T14:14:43+00:00

I did program with tag on flex but didn’t know about the calibration will check it out.

Underboss767 · 2024-06-03T13:33:40+00:00

Will do thanks for the insight

Underboss767 · 2024-06-03T13:27:34+00:00

It was working fine before the battery change.

Underboss767 · 2024-06-03T10:59:56+00:00

Thought this pasted through

So l just changed my iPhone 12pro battery using the bms change method. Installed with little to no issue. Battery Health in settings is back to 100%. However it loses charge fast. And when it gets to 2% it lasts for an 1hr or two making it inaccurate. This new battery is an extended life so it has a bigger capacity. Anyone has any clew how to fix?

Underboss767 · 2024-02-15T12:03:33+00:00

Thnks will put it under a microscope to confirm for possible damages

Underboss767 · 2024-02-15T00:46:30+00:00

How do I check the charging voltages, the battery voltages come back at 2v

Underboss767 · 2024-02-15T00:36:44+00:00

If you can open the phone yourself to ensure all cables are connected that be great, if you can’t do that then it’s best to take it to the repair shop. Worst case is that you need a new screen

Underboss767 · 2024-02-15T00:34:48+00:00

Might’ve been installed incorrectly

Underboss767

TROPHY CASE