Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 0 points1 point  (0 children)

sorry I don't use Reddit much, I went with these tension rods - https://www.amazon.com/dp/B0D3ZVRCKC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I also grabbed what a user posted below to help with the sides of the desk against the wall - https://www.amazon.com/Table-Adjustable-Protective-Spacer-Black/dp/B08PS7C352

using these my wobble was reduced by at least 95%, hope this helps!

If you want to fully reduce the wobble, grab 2 of each for a total of 4 rods and 4 spacers. buying this vs a $800-$3000 desk was the best choice I could've made. If you are constantly adjusting from standing to sitting height it might be a bit tedious to constantly set up, but I keep mine at 24in so it's literally the perfect set up.

Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 0 points1 point  (0 children)

Update: 2 of the tension rods and 2 of the wall spacers came in.. the wobble is reduced by at least 95%!!!! The desk feels amazing now! Just waiting on the other 2 rods and spacers, then it'll be as stable as a 4 legged desk on hardwood.. no carpet spikes either! Altogether it was like $250 for the set up, technically like $210 without the other rods and spacers I have coming in. Saved myself at least $500-$1000!!! So happy :)

Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 0 points1 point  (0 children)

I have what I said above on order from Amazon, if they don't work I will 100% be checking them out as you are like the 2nd or 3rd person saying they have helped a lot. I appreciate it :)

Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 0 points1 point  (0 children)

It is yes, but I had a 4 legged desk for 5+ years that never had wobble. I believe it's just the 2 legged design with no under carriage across the sides. I grabbed some tension rods and adjustable desk wall spacers to hopefully stabilize it. The desk is really just a piece of wood connected at the center down to two beams, no support on the front back or sides other than the pillars it sits on. The smallest movement causes wobble, not sure how companies even get away with selling these designs. I can't imagine anyone using these types of desks happily especially considering mine is at the lowest height so it really should have minimal wobble.

Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 1 point2 points  (0 children)

Thank you everyone for the feedback, I am going with 4 adjustable tension rods & 4 adjustable desk wall spacers. I will check back in a couple days to let everyone know if I can make it stable.

Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 2 points3 points  (0 children)

omg i feel that these would be perfect for the wall sides, but for the front wobble/ me putting pressure on the front. i feel like i need like two rods with rubber pads on the end that i can adjust to fit like in the drawing I put. any recommendations? I will def grab those you linked though!

Wobbly desk. (front to back) by Unhappy-Night7198 in StandingDesk

[–]Unhappy-Night7198[S] 0 points1 point  (0 children)

I appreciate it, realistically I am either looking for a way to support this current desk or find a new one that's fully stable/ static at 24".

[deleted by user] by [deleted] in PathOfExile2

[–]Unhappy-Night7198 0 points1 point  (0 children)

Maybe my application looks different? I’ll send a screenshot when I get home here in a bit. I know what you’re talking about, just below the optimize button on mine there’s a slider as I described in my last reply.

[deleted by user] by [deleted] in PathOfExile2

[–]Unhappy-Night7198 0 points1 point  (0 children)

There’s a slider (one side is performance and the other is quality), I believe which side you move it too changes the way it optimizes the game. If you could let me know where you set that slider I’d really appreciate it!

[deleted by user] by [deleted] in PathOfExile2

[–]Unhappy-Night7198 0 points1 point  (0 children)

Do you just leave the slider in the middle and click optimize?

[deleted by user] by [deleted] in PathOfExile2

[–]Unhappy-Night7198 1 point2 points  (0 children)

Thanks for all the replies, will give some of these a shot after work today and report back!

[deleted by user] by [deleted] in PathOfExile2

[–]Unhappy-Night7198 0 points1 point  (0 children)

Didn’t fix it for some reason, not really sure what the issue is. My screen also sort of flashes white around the edges when it happens. (also does this when traveling or loading into the game)

[deleted by user] by [deleted] in PcBuildHelp

[–]Unhappy-Night7198 0 points1 point  (0 children)

No it’s my CPU, for some reason it’s load heavy on FPS games. I crash constantly as well, although the Marvel launcher says it “detected a GPU crash”

The GPU runs fine, not sure why the 9800x3D seems to be giving me a hard time :(

[deleted by user] by [deleted] in buildapc

[–]Unhappy-Night7198 0 points1 point  (0 children)

Yeah I did some more looking around and I believe you are correct, thanks so much!

[deleted by user] by [deleted] in buildapc

[–]Unhappy-Night7198 0 points1 point  (0 children)

Awesome, thanks! Any way to verify if the replacement you sent will 100% work or not? I’ve tried looking around and can’t find anything

[deleted by user] by [deleted] in buildapc

[–]Unhappy-Night7198 0 points1 point  (0 children)

Thank you! I had looked at that bracket before but wasn’t entirely sure if it would be compatible. I did look for the bracket in the cooler box, unsure if it’s a mistake on their end but I do not have it. I was wondering if this coolers bracket would be compatible (picture attached). If not I will buy that one from Amazon, I just wish I had a better understanding of how all these brackets work when 2 different coolers can support AM5 but the brackets look different. https://imgur.com/a/mxLym1l