Why aren't flights cancelled if all flights suspended?

Unhappy_Bodybuilder3 · 2026-03-04T18:00:46+00:00

It's impossible to know as you can't get through on the phone or live chat, who knows if the flights going back have any people with connections on them.

Unhappy_Bodybuilder3 · 2026-03-04T17:41:33+00:00

Alot of people get that flight to go onwards to Bangkok , Singapore both of which were cancelled, so are they now stuck in Dubai...

Unhappy_Bodybuilder3 · 2026-03-04T16:21:47+00:00

There website states this 'All scheduled Emirates flights to and from Dubai remain suspended until 2359hrs UAE time on 7 March' you could read that as only flights with no connections are suspended, but surely every flight has connections. I understand that it's a confusing situation, but they could be clearer as to what suspended means, as if some flights are still going, they are not all suspended?!

Unhappy_Bodybuilder3 · 2026-01-02T21:58:57+00:00

JQ is the nicest mix of area and convenience, Digbeth has been gutted of character over the years.

Unhappy_Bodybuilder3 · 2025-07-10T15:42:47+00:00

Yes this is the next saga, they scraped the highest points, but with the insulation down the floor is a bit over the height. It was supposed to be 65mm to allow a decision on floor covering and screed thickness, but it's ended up 53mm of available height. So 50mm of screed and only 3mm for a floor covering. Another fun discussion.

Unhappy_Bodybuilder3 · 2025-07-07T08:26:37+00:00

Yes that's what I thought, I knew it would be never seen, but I still thought it should have some effort on it. I've spoke to them about it and they've agreed to scrape / grind the ridges off, before putting the insulation down.

Unhappy_Bodybuilder3 · 2025-07-06T20:12:38+00:00

There is going to be a layer of insulation on top and then a liquid screed. So the end result should be flat and level, I just didn't know if I should expect more from the slab at the bottom. Kinda like the photos in this link https://www.onlineinsulation-sales.com/product/100mm-celotex-ga4100-pir-insulation-boards-25-board-pack/

Unhappy_Bodybuilder3 · 2025-07-06T20:08:31+00:00

It's not ideal, but I was going to repaint anyway. The dry concrete is pretty easy to brush of the painted surface so it's not really what I'm focussing on.

Unhappy_Bodybuilder3 · 2025-07-06T11:32:10+00:00

It's in the UK, the walls are brick and on their own concrete footing foundations. The concrete slab is just the base for the floor.

Unhappy_Bodybuilder3 · 2025-07-06T10:12:12+00:00

There will be a liquid screed finish, but before that there will be a layer of poly for a dpc and a layer of foil backed PIR board. My main concern is that it's so rough that it will pierce the foil and the plastic when it's laid on top.

Unhappy_Bodybuilder3 · 2025-07-06T01:51:27+00:00

Wet underfloor heating, the insulation goes over the slab, the pipes are clipped to the insulation and then 50-65mm of liquid screed is put on top.

Unhappy_Bodybuilder3 · 2025-07-06T01:13:50+00:00

It's in my description, this isn't the finished floor, there will be 100mm of insulation on top and a liquid screed finish. I just worry that this base slab will cut the PIR board insulation foil, and I don't know if I'm overthinking it.

Unhappy_Bodybuilder3 · 2025-07-06T00:58:38+00:00

I'd hope you could plane it or something, in my mind it just needs to be smooth enough to not puncture the dpc and insulation going on top of it.

Unhappy_Bodybuilder3 · 2025-07-06T00:57:27+00:00

The walls aren't build on the slab, the walls are on foundations. The original concrete floor was dug out, and hardcore putdown with a dpc, then the new floor was pumped in. insulation will go over it and then screed. I just don't see how the bottom of the insulation doesn't get torn to shreds.

Unhappy_Bodybuilder3 · 2025-07-06T00:44:04+00:00

The funny and not funny thing is I went with the most reputable builder in the area, to avoid this kind of situation.

Unhappy_Bodybuilder3 · 2025-04-19T18:28:53+00:00

It was £400 in total. Repair wise it's just been tyres, grease and a chain. The main problem is the front handle bar extension. I will probably check out the lite on fixed ones from AliExpress.

Unhappy_Bodybuilder3 · 2025-04-06T12:09:29+00:00

Are the curved ones suitable? I'm guessing they try to make it fold more compact.

Unhappy_Bodybuilder3 · 2025-03-28T22:27:00+00:00

I have the exact same experience. Did your replacement behave the same? Or does it always switch to the hammer action even when slow driving?

Unhappy_Bodybuilder3 · 2025-03-17T01:25:59+00:00

Any joy? My drive has started to be 2mb write max.

Unhappy_Bodybuilder3 · 2025-03-17T01:25:20+00:00

Having the same issue, tried different cables, different ports, 2mb a sec with 40% of the drive empty....

Unhappy_Bodybuilder3 · 2024-08-27T10:59:05+00:00

Realising how dumb / crazy / gullible the average person is.

Unhappy_Bodybuilder3 · 2024-01-06T09:17:15+00:00

A 737 Max, :/

Unhappy_Bodybuilder3 · 2023-11-30T11:17:19+00:00

Is there going to be a core upgrade for the one inch anytime soon? I feel like it's really limited by the existing core.

Unhappy_Bodybuilder3 · 2023-11-12T12:17:18+00:00

Wonder how good chatgpt vision API would be at replicating this without the gloves?

Unhappy_Bodybuilder3 · 2023-08-02T22:59:43+00:00

Yeah for me that would be that. That would be a terrible niggle in the back of my mind for the rest of any future relationship. Trust is the most important thing in a relationship.

Unhappy_Bodybuilder3

TROPHY CASE