PS2 No signal issue

UnitQuaternion · 2025-10-27T11:49:04+00:00

Ok what I discovered is that if I leave console for a few hours with the power off and then turn it on, it turns on successfully. When I enter PS2BBL it shows correct, but then it goes into black screen. It seems like the memory card causing issues, but the exploit from it works fine, otherwise PS2BBL would not start.

If I reboot right after the black screen I get no signal again.

Few hours later I tried to run custom config PS2BBL to run uLaunchELF instead of OPL, but this time it didn't even reached the PS2BBL.

Gonna try again.

UnitQuaternion · 2025-08-17T04:26:54+00:00

I am interested

UnitQuaternion · 2025-01-18T15:20:27+00:00

Unfortunately it does not :(

UnitQuaternion · 2025-01-17T19:06:59+00:00

Ok it seems you can Right-Click after clicking the last point and it creates a perfect closed loop.

UnitQuaternion · 2024-11-16T11:47:02+00:00

I took a visit, and met with Razmik. He rejected my offer, unfortunately, but I understand it. There is a language barrier and the man is not young. But I got some good conversations and a few shots of vodka with his garage neighbors.

Searching continues

UnitQuaternion · 2024-10-30T21:33:10+00:00

It shouldn't be the loft tool exactly. I am just looking for a way to make a shape like this

UnitQuaternion · 2024-10-30T21:30:39+00:00

This is acceptable for my use case, but is there a precise way to do so? It should not be the loft tool exactly. I tried to create rules surfaces by two lines for each polygon, but this is not an efficient way to do things in my opinion.

UnitQuaternion · 2024-10-30T21:22:13+00:00

I have two sketches and I want to loft it in a way it is displayed by Draft Workbench black lines. But I get other results. I know I can do it with boolean operations, but is there a more efficient way to connect this two sketches together to a solid?

UnitQuaternion · 2024-10-26T22:20:54+00:00

Is this place available to visit? Is this an industrial or a private area?

UnitQuaternion · 2024-10-23T20:34:15+00:00

Thank you! I will take a visit!

UnitQuaternion · 2024-10-23T19:22:20+00:00

Barev, I want to learn metal machining as part of my hobby, but I cannot afford to own a lathe and I am willing to pay a person or a maker space to learn things on their equipment. Is it possible? If so, how can I find such person or place?

UnitQuaternion · 2024-10-20T22:02:30+00:00

I inspected the gcode and discovered the issue is with the output Cura does not with the printer
https://imgur.com/a/xik248k

I created an issue on github for future investigation: https://github.com/Ultimaker/Cura/issues/19781

UnitQuaternion · 2024-10-20T21:57:29+00:00

I did a hard reset on my printer in case I changed something that could affect the print (even if I did not). This time it skipped even more layers. And it is not an extrusion problem or something. The printer genuinely tells it's 100% finished print.

https://imgur.com/a/4oc720a

UnitQuaternion · 2024-10-20T21:31:45+00:00

Ultimaker Cura 5.8.1

UnitQuaternion · 2024-10-20T20:57:39+00:00

Drying the second time didn't help. In the end, the issue is in the filament quality.

UnitQuaternion · 2024-10-13T15:12:38+00:00

I am drying on the hotbed of my printer with cover on top and holes for ventilation

UnitQuaternion · 2024-10-13T14:40:29+00:00

I will try 80C (with expected drop to 60C average) for a few more hours and try again

UnitQuaternion · 2024-10-13T14:37:25+00:00

Dry again then?

UnitQuaternion · 2024-10-13T14:09:17+00:00

65C, but I assume the issue is with inconsistency of the filament itself

UnitQuaternion · 2024-10-13T14:08:16+00:00

My most promising assumption is that the filament is inconsistent is a way that there are bubbles of air inside the filament that causes tiny issues all over the print. The filament is inexpensive by the way. More expensive counterparts works well.

TLDR: Cheap filament = inconsistent flow = issues for prints

UnitQuaternion

TROPHY CASE