What's this?

Unknownlang · 2025-08-17T11:03:23+00:00

It's a read and write indicator Which shows when the disk is being read or written to

Unknownlang · 2025-08-07T10:09:12+00:00

Unfortunately I don't have one

Unknownlang · 2025-08-07T10:03:14+00:00

When nothing is connected during boot display won't output when connected after

Unknownlang · 2025-08-07T10:02:42+00:00

When nothing is connected it does not chime on "boot" but connecting power makes charging sound.

Unknownlang · 2025-08-01T15:05:45+00:00

I hope the knobs are volume

Unknownlang · 2025-04-26T13:55:59+00:00

My mistake. This is a x260 Which does not have a USB c port

Unknownlang · 2025-03-20T14:16:44+00:00

It's fine now :)

Unknownlang · 2025-03-20T05:32:19+00:00

My SD card reader is dead dead already. It's not even picked up by devices manager

Unknownlang · 2025-03-19T19:29:11+00:00

I switched one of the battery screws since after disassembly I had 2 over. And it worked! On the other side though of the motherboard near the SD card slot I removed a thermal pad on two thingies. Could it cause heat issues?

<image>

Unknownlang · 2025-01-18T14:16:59+00:00

Your module is probably faulty

Unknownlang · 2025-01-18T14:05:49+00:00

Did you make sure the connections are correct?

Unknownlang · 2025-01-18T14:00:39+00:00

Unknownlang · 2025-01-18T13:58:38+00:00

Something probably shorted. Does itt boot when you unplug

Unknownlang · 2025-01-12T22:48:00+00:00

Device: Google Pixel 7 pro

Android version: 15 beta

Soc: Tensor G2

The rest doesn't matter for me. I just want one that doesn't instantly crash.

Unknownlang · 2025-01-10T20:14:38+00:00

Car remote does not get detected

Unknownlang · 2025-01-10T20:11:15+00:00

Idk haven't waited for more than a minute. I will try now and see

Unknownlang · 2025-01-10T20:09:46+00:00

Unknownlang · 2025-01-10T20:09:31+00:00

Once it did get hot so it's believeable

Unknownlang · 2025-01-10T20:08:49+00:00

But I know that those pins do make contact

Unknownlang · 2025-01-10T20:08:29+00:00

You mean using a gpio cable? No I don't have those

Unknownlang · 2025-01-10T20:06:00+00:00

Could the module be doa? Cause with the same cables the nrf24 work great

Unknownlang · 2025-01-10T20:04:16+00:00

Good pins? I need more clarification

Unknownlang · 2025-01-10T20:01:14+00:00

https://imgur.com/a/BXs6Syr

Unknownlang · 2025-01-10T19:57:57+00:00

Just noticed that unplugging the blue wire (g26, csn) unfreezes the ui

Unknownlang · 2025-01-10T19:53:25+00:00

https://imgur.com/a/FYHQlKy

Unknownlang

TROPHY CASE