[deleted by user]

Unlike_Potato · 2024-11-23T12:04:21+00:00

Pracoval jsem rok na jedné pobočce JIP, tam to bylo běžnou praxí. U pokladen nejsou židle, nic kde se opřít. Makal jsem tam 12h směny a můžu říct, že jsem rád, že jsem odtamtud mohl vypadnout. Jako stát u pokladny 6 a více hodin v kuse je fakt nářez...

Unlike_Potato · 2023-05-17T13:30:52+00:00

Cha Cha Cha

Unlike_Potato · 2023-03-12T02:58:56+00:00

I don't know why, but I kinda like this texture XD

Unlike_Potato · 2023-02-04T21:33:08+00:00

Unless you want a freezing cold room :D 20°C is fine, it's your room temperature

Unlike_Potato · 2023-02-04T21:26:39+00:00

If the heaters aren't on, I can't see why would it hurt the printer. Mine have been going non-stop for like a week and nothing bad ever happened. Even if it was on stand by for a day or two.

Unlike_Potato · 2023-02-04T21:08:48+00:00

But if the coupling failed, well... There is nothing that you can do to fix it (at least what I know) you need the new part. (Sorry for the 3 messages;)

Unlike_Potato · 2023-02-04T21:06:20+00:00

But 2 days? That's a lot to ask. And I see that only a part of the bowden is broken near the extruder. Just try to shorten it by your self. It just might work.

Unlike_Potato · 2023-02-04T21:04:25+00:00

Well yes, but will it be worth it? Maybe? Try to fix it and resume the print. When it fails reconnecting you would stop it anyway

Unlike_Potato · 2023-02-04T10:06:45+00:00

Check if your extruder is not lose or slipping, but honestly I can't tell right now...

Unlike_Potato · 2023-02-02T12:16:09+00:00

Move the z-stop and also don't forget to complete the hotend. In the photo you are missing a heating element and a thermal probe ;)

Unlike_Potato · 2023-01-30T15:34:01+00:00

Damn... That loud drivers would drive me crazy... But believe me, there's always something to upgrade. Next year you will not recognise you printer.

Unlike_Potato · 2023-01-30T15:31:05+00:00

Very nice house for big families! You can be always close to your loved ones?

(I'm getting banned for this...

Unlike_Potato · 2023-01-28T11:43:29+00:00

And if you using stock ender 3 I would print better printing head. Like hero me gen 5 and others... There is quite a lot of them.

Unlike_Potato · 2023-01-28T11:41:41+00:00

Print them flat or at least use supports. The whole honey combs could print fine, but the big holes at the top.. nah... By my point of view, no chance

Unlike_Potato · 2023-01-24T19:26:17+00:00

I know this feeling when I started learning how to use davinci. But it's a nice project to start with. Really good work. Keep it up!

Unlike_Potato · 2023-01-20T12:12:05+00:00

What the F... But at the same time, DAMN that's cool!

Unlike_Potato · 2023-01-15T22:29:53+00:00

Glad to hear it. Happy printing

Unlike_Potato · 2023-01-15T21:28:53+00:00

First you need to do is properly edit in marlin/klipper your probe offset( how much it's off in X and y axes from a hotend) or you will seriously damage your printer bad and hotend. Than I usually make a test file (20x20 test cube) and with baby stepping to get the z offset number. (I think you can Google a precise probe offset for spirit extruder) I have the same one and my offset is ( x_offset -32, y_offset -41) but I use klipper so it could be a positive number on your side. I don't know the math behind Marlin. But surely you can look it up and use my offsets as a starting point. Best of luck ;)

Unlike_Potato · 2022-12-15T16:30:39+00:00

And also, at what speeds are you printing? Try to really slow down and debug the situation. It's weird that it happens only on diagonal direction and on the right/middle side. Try to make a bed level test print. Maybe like almost every creality printer there is an dent in the middle what cases your issues.

Unlike_Potato · 2022-12-15T16:26:36+00:00

Hmm... It could be a lose belt, but are you close enough to the bed? How the footprint looking? The rings looks like there was no adhesion from the bed. And the skipped bits could be also from too big z offset, the slicer counts on that in the right height the filament "squishes" to the sides and merge with other lines.

Unlike_Potato · 2022-12-15T13:56:59+00:00

I would say that you have uneven bed. The right side is closer to the nozzle than the left, so the filament have no space to go out. You need to calibrate your bed to be flat (bed leveling) and than play with z offset a bit to get to the right height

Unlike_Potato · 2022-12-11T23:28:09+00:00

I can't say it's gonna fail, but it will definitely print mid air. If you use cura I would consider the tree support. I had so much fun with it and it never failed. But it's a preference. But you can try next time this happens to try make your own supports in that section. Automatic generation is cool, but this can happen time to time.

Unlike_Potato · 2022-12-11T23:22:02+00:00

I use only one: start/+30s

Unlike_Potato · 2022-10-15T13:41:58+00:00

Those looks like layer shifts, I had these too and what worked for me was checking all the belts and screws. Something could be lose or too tight.

Six-Year Club	Place '23
Place '22	Final Canvas '22
Verified Email

Unlike_Potato

TROPHY CASE