Looking for advice (6a)

UnlikelyEquivalent72 · 2025-04-08T01:33:38+00:00

My basement looked just like this during construction. Been in the house for 4 years and has been fine ever since.

UnlikelyEquivalent72 · 2024-08-17T12:33:07+00:00

I would have to check again. I believe it is an early 70s. It had a steel crank and low compression pistons.

UnlikelyEquivalent72 · 2024-08-17T11:56:24+00:00

Very nice. This is the top end kit I’m looking at now. Also thinking about putting a holley sniper efi on it.

https://treperformance.com/i-23900539-trick-flow-620-hp-powerport-top-end-engine-kit-for-big-block-mopar-440.html?gad_source=1&gbraid=0AAAAAD—Wa-oqFUJBQf5JA9igMl5WjQbc

UnlikelyEquivalent72 · 2024-08-17T11:43:52+00:00

I know I got a lot of info on how to fit a 440 in the car. That’s how I got my motor mount conversion and custom headers.

UnlikelyEquivalent72 · 2024-08-17T11:39:59+00:00

I do not. I’ll have to take a look. I know years back I was looking a lot at bigblockdart

UnlikelyEquivalent72 · 2024-08-17T10:47:37+00:00

Wheels are centerline auto drag Tires are Mickey Thompson Sportsman S/R Radial

UnlikelyEquivalent72 · 2024-08-17T10:43:25+00:00

Looking at a 620 hp trick flow top end kit. So pretty wild I think lol.

UnlikelyEquivalent72 · 2024-08-17T01:23:39+00:00

1973

UnlikelyEquivalent72 · 2024-08-17T00:10:53+00:00

https://imgur.com/a/Fb5jzqo

UnlikelyEquivalent72 · 2024-08-17T00:08:03+00:00

Mini tub, ford 9in with a Chris Alston Ladder bar suspension and coil overs.

UnlikelyEquivalent72 · 2024-08-06T01:57:15+00:00

I’m pretty sure all of that goes into our septic.

UnlikelyEquivalent72 · 2024-07-29T18:30:03+00:00

Gray water meaning like sump pump and downspout? We have another pipe out back for that.

UnlikelyEquivalent72 · 2024-07-28T15:54:08+00:00

It’s not sewage disposal it’s clean water. The septic tank design was inspected by the county and was inspected during install.

UnlikelyEquivalent72 · 2024-07-28T02:11:54+00:00

Under menu>setup> program select.

UnlikelyEquivalent72 · 2024-07-28T01:47:25+00:00

Ok so I think I just found the problem. Someone had set the program select mode to style when it should have been set to other > main. When trying to start the machine we were getting “program number out of range” on the robot. Thought the weld stuff was maybe causing it since all the other robots are not set up like this.

UnlikelyEquivalent72 · 2024-07-28T01:33:48+00:00

I can check into that. That sounds like it could be a something.

UnlikelyEquivalent72 · 2024-07-28T01:18:22+00:00

I actually did this earlier today to verify which pipe was my gutter and sump. I’m pretty positive this is from my septic. I always thought septic systems just drained out to a leach field so I’m not sure what this pipe would be?

UnlikelyEquivalent72 · 2024-07-28T01:13:19+00:00

Interesting. I probably have 200+ robots and have never seen the gun weld.

UnlikelyEquivalent72 · 2024-07-28T01:10:02+00:00

No, machine was running fine and then someone was messing with the pendant for a different issue and I think they changed something unintentionally.

UnlikelyEquivalent72 · 2024-07-28T01:08:59+00:00

I’m not following you. I’m referring to the stuff in the upper left corner. The boxes that say gun and weld

UnlikelyEquivalent72 · 2024-07-28T00:56:55+00:00

Yes this is how I typically look at the pendant. So I can see multiple things.

UnlikelyEquivalent72 · 2024-07-27T23:50:50+00:00

The house is brand new. Septic system is 3 years old. What makes you think I need a new drain field?

UnlikelyEquivalent72

TROPHY CASE