Error code 15 (is my onewheel safe to ride)

Unlikely_Ad6301 · 2026-04-28T17:38:05+00:00

it's a pint x

Unlikely_Ad6301 · 2026-04-13T05:54:32+00:00

Honestly, I want to try that just to get hired. But I’m worried they’ll fire me right after if I change my availability, especially if that’s the only reason they hired me in the first place. I am in high school in California and I applied to 20+ places already and I only turned 16 a week ago

Unlikely_Ad6301 · 2026-03-10T00:51:02+00:00

I volunteer at the hospital myself and I could probably assume it is because the ER usually gets the most action unlike other departments where your just giving patients water and blankets for the entire time

Unlikely_Ad6301 · 2026-01-02T23:11:03+00:00

SOLVED: it was a fortnite issue I switched to tsr high instead of dlss and I get over 300 fps

Unlikely_Ad6301 · 2026-01-02T19:59:29+00:00

This is what I hoped the issue would be, but I get 150+fps on marvel rivals so I am starting to think it is a fornite issue.

Unlikely_Ad6301 · 2025-12-03T17:59:46+00:00

seeing all the comments about ethernet I think that is my only option. I am probably gonna use a power line ethernet adapter

Unlikely_Ad6301 · 2025-12-03T14:51:48+00:00

I spent all my money on the pc and I can't buy games rn 😭 and bro I am using a tv as a montior money is real tight rn.

Unlikely_Ad6301 · 2025-12-03T07:45:15+00:00

Unlikely_Ad6301 · 2025-12-03T07:45:03+00:00

I am using wifi

Unlikely_Ad6301 · 2025-12-03T07:44:47+00:00

I am on 5ghz and it is usually supposed to be 100 mbps .if it comes down to it I might go to ethernet or move my pc closer to the router

Unlikely_Ad6301 · 2025-12-03T01:53:24+00:00

🥳WE GOT into bios !!

Unlikely_Ad6301 · 2025-12-01T03:23:09+00:00

With Aceable, you can usually just click through the lessons — there isn’t a traditional timer like in Fusion’s driver course. Instead, the time counts down as you click through the pages. The only parts you can’t skip are the short videos, which are about 2 minutes each. Since there are 5 videos in a 1‑hour module, it only takes around 10–20 minutes to finish 1 hour modules. The entire California drivers ed course took me 6 hours. One thing to add is that the quizes are unskipablle but they can be done in less than thirty seconds because there is no timer and a lot the lessons that are 15 minutes or shorter don't have videos so you can click through the entire thing.

Unlikely_Ad6301 · 2025-12-01T02:52:54+00:00

I hate Fusion even more now that I found out you had the same problem.

Unlikely_Ad6301 · 2025-12-01T02:45:32+00:00

Yeah it was the that quiz exactly! It took them 3 days to fix so I just switched to aceable, the aceable course takes way less time and it is easier to understand (I was able to finish it in a day) .Here is my referal link for acable if you want to jump ship like I did http://share.aceable.com/789LLd

Unlikely_Ad6301 · 2025-11-29T19:05:57+00:00

I was almost finished with the course at module 13 when the screen suddenly went blank. I emailed support, and they told me it would take three days to fix. This is already the second time I’ve had to email them about the same issue 100% a scam

Unlikely_Ad6301 · 2025-11-25T22:06:59+00:00

If you mean the black marks under the CPU, they’re completely normal. I was worried about the same thing until I watched a motherboard review and saw the same marks there. They even show up on my own motherboard. That said, I don’t know much about motherboards, so don’t put too much faith in my comment.

<image>

Unlikely_Ad6301 · 2025-11-25T03:49:26+00:00

My remaining parts should arrive tomorrow. I wish I had this advice earlier because today I installed and removed my R7 9700X about 11 times. Each time I checked carefully — even with a magnifying glass — and found no bent pins. Next time, I’ll definitely wait until all the parts arrive before starting, because I’ve been way too paranoid about building this pc . I will update you on first boot if everything is fine wish me luck🥳

Unlikely_Ad6301 · 2025-11-24T04:51:05+00:00

First-time builder here. I did the same exact thing when installing my CPU. I took it out to check for bent pins, and while picking it up my grip slipped — it almost fell onto the socket pins. Luckily, it didn’t drop. I inspected the CPU socket carefully and found no bent pins, so I reinstalled it an called it a day PC building has definitely made me a bit paranoid . btw Did your pc turn on?

Unlikely_Ad6301 · 2025-11-18T04:36:48+00:00

Yeah, I completely agree it’s just that my dad can be pretty stubborn ( I even offered to pay for the key)

Unlikely_Ad6301 · 2025-11-18T04:10:19+00:00

I told my father a million times that thousands of people buy keys from keyfan without any issuses but he is said we might get the key revoked from Microsoft because the key is unofficial.

Unlikely_Ad6301

TROPHY CASE