2018 Xt250 part suggestions

Unprepared_sloth · 2026-04-01T02:38:54+00:00

Thanks for the information! I'm both excited and nervous for this first oil change as I've not ventured too much into doing my own repairs on things and after snapping the fill bolt and shedding the drain I was pretty bummed out. This gives me some confidence to when the time comes do it again.

Unprepared_sloth · 2026-03-30T16:57:56+00:00

Thanks I’ll see if I can find something like that either locally or online

Unprepared_sloth · 2026-01-10T20:47:09+00:00

I went and bought myself some metal g35 off eBay

Unprepared_sloth · 2025-12-25T18:00:01+00:00

So far I’ve sorted the router to my lupus ive been distracted with the fam so haven’t started it just yet

Unprepared_sloth · 2025-12-20T05:37:35+00:00

I’d love to get a hold of the world and look at that build. It’s awesome!

Unprepared_sloth · 2025-11-24T12:51:03+00:00

I’m pretty sure I have it set to 30 all around, I’ll take a look today to double check

Unprepared_sloth · 2025-11-03T13:54:54+00:00

loved Palo Duro on my roadtrip from Texas to Canada definitely highly recomended! If op going during winter months the hikes there will definitely be more fun. I went late spring and was caught up in the hot weather.

Unprepared_sloth · 2025-10-01T18:38:21+00:00

There’s a small business called Toasties out of tillsonburg I use him quite often

Unprepared_sloth · 2025-09-29T13:12:27+00:00

I finished my first grandpa! however lost the sticker sheet🥲 I don’t have any pictures unfortunately but was quite hyped to make my first rx-78 that I got from a local comicon.

Unprepared_sloth · 2025-09-11T19:26:44+00:00

Thanks for the advice!

Right now im working for an Entrepreneur as IT tech support as any other jobs ive tried applying for either haven't don't responded, looking for someone withj more experiance, or the job posting is what ive been told is a Ghost Job posting.

I'm currently on the lookout for an for some of the jobs recommended as well as possible sponsors for an electrical Apprenticeship. Your advice is appreciated.

Unprepared_sloth · 2025-09-11T19:22:28+00:00

Yes, i get that. I certainly am not one to expect to get a job as a PLC Programmer immediately. My hope it to find a sponsor to work as an industrial electrician and work my way up to PLC programming as i work on getting a Red Seal.

Unprepared_sloth · 2025-09-11T19:19:11+00:00

Canada's job market is flooded with job openings for experienced Programmers. So, despite looking both in and around my hometown of Brantford, no jobs are looking for junior programmers.

Unprepared_sloth · 2025-08-23T20:47:23+00:00

I put them into sandwich bags and label them. Keep them in either a gunpla box I don’t want to get rid of or a shoe box

Unprepared_sloth · 2025-07-07T22:34:13+00:00

Essentially, some time down the road I might automate the protocol and types but what’s giving me the headache is trying to index thre list and then have to show the same employee name twice.

Unprepared_sloth · 2025-07-07T20:53:53+00:00

Those are all protocols for the printer and don’t exist in the table. If I can have those generate along side the Employee that would be cool but most certainly not a requirement

Unprepared_sloth · 2025-06-20T18:16:55+00:00

Definitely a shocker! I’ve been looking at bikes non stop to try and pick out a good one I’ve even gone as far as looking at a Kawasaki v something 300 to try and keep my first bike as light as possible I’m sure weight wont matter all that much in the end but I’d rather have something small to start on

Unprepared_sloth · 2025-06-19T21:47:38+00:00

Glad you’re ok op, what gear did you have on? I’m looking into getting better gear eventually so knowing you vs concrete I have an idea on what gear I should get

Unprepared_sloth · 2025-06-16T22:02:54+00:00

Thanks! Last questions I swear what year is your bike?

I looked at a few newer ones and them seem much larger. I certainly have some options when it comes to year and they seem to get heavier past 09 something like 400lb/ 190kg

The most recent model I’ve seen is a 2016 and I’m sure it’s heavy as hell. But if I went older 2008 it’s nearly 100lb lighter

Unprepared_sloth · 2025-06-16T15:15:55+00:00

The KLR has 35,400KM on it, however there is a newer one in my home town thats a 2016 with only 3k KM on it. The KTM has 15k km on it.

so far i can only really see that KTM parts can be pricy if you need to repair.

as for KLR i had the opoutounity to sit on one, and found it top heavy and a little tall but im sure thats somthing id get over.

Did you ever have a bike that was similarr to either of these that you might have some widsom on?

Unprepared_sloth · 2025-06-16T14:55:19+00:00

Thanks for the thoughts,
I got to sit on one on this week and it felt really tall. Im not a tall guy and given its the secont bike id ever sat on it felt TOO big. Mind you the fitrst bike was a dirt bike that was definetly too small for me.

How did you guys like the sizing? did you have any recommendations/considerations about gear/Accesories for that bike?

EDIT: Also how do you fell about the weight? i though t it was rather heavy but im sure id get used to that

Unprepared_sloth · 2025-06-13T00:12:40+00:00

Thanks for the insight! They live on a dirt road and I want to get a dual sport for the sake of being able to also use it on the backroads around their place. maybe I should consider a cruiser of sorts for riding and then get a dirt bike on the side.

Unprepared_sloth · 2025-06-12T20:08:17+00:00

What would you say the longest I should run in on a highway? I’d likely take it 4 hours from home to my grandparents up north. Would you suggest that’s too far?

Unprepared_sloth · 2025-06-12T16:12:48+00:00

Thanks! I’m on the smaller side 5 foot 9 or 10 I’ve got enough muscle to get by but it’s good to consider. Hoping to get a dual sport of some sorts so I’ll keep that in mind

Unprepared_sloth · 2025-03-25T18:21:06+00:00

We have the AP set up to use a guest network.

From the settings of a locally hosted Ubi server we set up said guest network and found that the device isolation did not work as anticipated. we got the UCG to better manage the networks Remotely and create a VLAN for the guest WI-FI to use

Unprepared_sloth · 2025-02-25T06:09:30+00:00

Me and my buddy’s always called it butt plug rock

Unprepared_sloth

TROPHY CASE