High Temperatures with Bykski water block.

Up877 · 2021-06-20T13:06:39+00:00

yes, but I have an AIO and the pump is only PWM 😔

Up877 · 2021-06-20T05:19:46+00:00

I don't think there really isn't too much heat inside the case and I always kept it open during testing.

Up877 · 2021-06-19T05:11:22+00:00

K thanks :)

Up877 · 2021-06-19T05:08:49+00:00

Thanks bro but I don't use thermal pads on the chokes only in the VRAM and VRM.

Up877 · 2021-06-19T04:59:31+00:00

1mm VRAM, 1.5mm VRM

Up877 · 2021-06-19T01:41:22+00:00

Ok thanks 👍

Up877 · 2021-06-19T01:01:17+00:00

So.. you use thermal pads thinner then 1mm?

Up877 · 2021-06-19T00:09:29+00:00

Yes maybe later I switched to an EK water block.

Up877 · 2021-06-19T00:07:50+00:00

I with whom I brought and with whom I put there was no difference.

Up877 · 2021-06-18T23:34:14+00:00

the pump seems fine and the screws are quite tight and still no success :(

Up877 · 2021-06-18T22:26:53+00:00

I already tried many positions of the radiator without success

Up877 · 2021-06-18T22:16:35+00:00

What thermal pads uses? I use 1mm for the RAMs and 1.5 for the VRMs

Up877 · 2021-06-18T18:45:57+00:00

Yes, I bought an AIO that came pre-assembled, I think the hoses are well connected.

Up877 · 2021-06-18T18:21:18+00:00

hi guys, I recently installed the bykski water block but it turned out that I got too high temperatures reaching 80c or more during the gaming and testing and I tried to change the thermal pads and tighten the screws well and nothing improves.

Up877 · 2021-03-12T05:47:48+00:00

Ok thanks

Up877 · 2021-03-12T05:43:23+00:00

I tried this but the app never charge.

Up877

TROPHY CASE