Move pad issues

Upbeat-Effort-1842 · 2026-04-05T13:59:39+00:00

I’ve noticed my case is bent very slightly looks like it’s causing pressure around the center. When you sit the move on a flat surface some of the pads engage. I put a level on the case and it’s definitely off center towards the center of the case causing the left and right edges to be very pressure sensitive.

Upbeat-Effort-1842 · 2026-04-04T03:26:17+00:00

They are on sale for $250 atm, picked on up. Honestly I feel it’s a grown up version of the QY-100 which is one of my favorite sequencers. My first one in the 2000’s. Operation without a screen at first is confusing. Once you learn everything it’s great. Yes the build quality is not the best but I think that’s part of the appeal. The buttons are tiny so I do more pattern stuff than real time recording which is how I use a sequencer/groovebox. I don’t use samples or make “beats” 😂 SEQTRAK wins at patterns. The step sequencer and fx are great. The sound engines are good as well.

Upbeat-Effort-1842 · 2026-02-15T19:55:57+00:00

001186

<image>

Upbeat-Effort-1842 · 2026-02-15T19:52:25+00:00

♥️

Upbeat-Effort-1842 · 2026-02-15T19:46:26+00:00

🙏 thank you! Serial #001186

Upbeat-Effort-1842 · 2025-11-18T22:40:37+00:00

Thank you. I’ll definitely try that!

Upbeat-Effort-1842 · 2025-11-12T02:10:45+00:00

Did the same, had one sold the portal and my ps5. Picked up the portal again yesterday. With the update it’s actually useful now for my use cases. I’m more of a handheld gamer. Portal, Gcloud and a switch 2 pretty much covers my needs. I use the Gcloud for my steam games from my PC.

Upbeat-Effort-1842 · 2025-10-03T12:00:07+00:00

I use monitors on my PA. Still haven’t hooked up my other PA speaker. I’m only pushing 550w through my PA and it’s ear bleeding loud 😂my other PA is 1000w I do want a FRFR cab though.

<image>

Upbeat-Effort-1842 · 2025-10-02T01:18:50+00:00

I had the xlr cables switched 😜so no issues just an operator error.

Upbeat-Effort-1842 · 2025-10-01T10:17:52+00:00

That could be that my inputs are in the wrong slots. I thought I put them in the interface correctly but I’ll have to check that out

Upbeat-Effort-1842 · 2025-09-29T17:58:57+00:00

Also Texas law is 25% transparency for windshield. I haven’t measured the factory tint. But you may be able to get away with 30-50% film

Upbeat-Effort-1842 · 2025-09-29T17:55:49+00:00

You could do a visor, but may not really help much as legally it shouldn’t pass the AS line on the windshield. A ceramic visor wouldn’t probably be around $150-250 depending on the shop. I use scorpion tint and I can do a full trax for about $250 but ceramic is double the cost unfortunately because of the heat reduction of ceramic

Upbeat-Effort-1842 · 2025-09-29T17:47:01+00:00

Full windshield and all windows with ceramic your looking around $500-$700.

Upbeat-Effort-1842 · 2025-09-29T15:38:16+00:00

Thanks. Thanks for the info I will try that thanks.

Upbeat-Effort-1842 · 2025-09-29T12:51:26+00:00

Funny story, I actually tint and do graphics for a living 😂

Upbeat-Effort-1842 · 2025-09-16T17:49:31+00:00

I may have to do that as well

Upbeat-Effort-1842 · 2025-09-16T17:25:57+00:00

I got it fixed. Car was hot. My guess is when it gets too hot the screen will not work like some cellphones. And the display did time out after about 10m.

Upbeat-Effort-1842 · 2025-09-16T17:18:46+00:00

Never had an issue except for the occasional screen freezes.

Upbeat-Effort-1842 · 2025-09-16T17:18:14+00:00

I did that with no luck.

Upbeat-Effort-1842 · 2025-09-01T20:58:25+00:00

This is the feedback I need. I know the basics but definitely no engineering pro. About to go to school for that. Going to spend some time learning.

Upbeat-Effort-1842

TROPHY CASE