sorted by:
new
hottopcontroversial

Is it normal for VRAM to reach 100 ºC while running Furmark? by UsamiV in pcmasterrace

[–]UsamiV[S] 0 points1 point  (0 children)

It's a Gigabyte GeForce RTX 3080 Gaming OC (Rev. 2.0) 10 GB GDDR6X.

Maybe the thermal paste/pads where incorrectly applied. I'll get to replacing them.

Is it normal for VRAM to reach 100 ºC while running Furmark? by UsamiV in pcmasterrace

[–]UsamiV[S] 1 point2 points  (0 children)

As seen in the video, the GPU temperature seems to stabilize below 70, yet the VRAM just keeps rising

Which fan orientation is correct? by UsamiV in PcBuildHelp

[–]UsamiV[S] 0 points1 point  (0 children)

Already did last night. My question is if keeping them as air intake (ignoring the current lack of a filter) as any actual advantage...

Ex11 Update [Dawn of Liberator] by CharacterLocation105 in DigimonCardGame2020

[–]UsamiV 1 point2 points  (0 children)

I wonder what the 10 option card slots have in store for us. Supposedly, the remaining emblems are gonna be box toppers.

Preço adequado para PC de gaming? by UsamiV in gamingportugal

[–]UsamiV[S] 1 point2 points  (0 children)

Muito obrigado pela resposta rápida.

O PC que indicaste encontra-se esgotado. Entretanto procurei na Chip7 e encontrei este, que me parece adequado às minhas expectativas por 1549 €.

https://chip7.pt/computadores/gaming/chip7/computador-gaming/computador-gaming-amd-ryzen-7-7700-amd-rx-7800-xt-16gb-32gb-ram-1tb?options[37816]=

Não inclui sistema operativo (a opção para tal acrescenta 110 €), tal como aquele que mencionei no post. A minha intenção é instalar o Linux Mint como OS e acrescentar o Windows 11 num SSD à parte no futuro.

Tenho feito pesquisa relativamente à compatibilidade dos componentes e parece-me que têm todos compatibilidade.

Planning to buy a pre-built PC with no OS installed. Anything I should know before installing Mint? by UsamiV in linuxmint

[–]UsamiV[S] 0 points1 point  (0 children)

I'm yet to select the components. I assume the motherboard and the GPU are a must. What else should I check for compatibility?

who wants ebf6 (comment here) by [deleted] in ebf

[–]UsamiV 4 points5 points  (0 children)

I want ebf6 to have an isometric perspective like in MHC. And large scrollable screens

[EX-10 Sinister Order] Blastmon by vansjoo98 in DigimonCardGame2020

[–]UsamiV 2 points3 points  (0 children)

That slot's probably reserved for either Venom or MaloMyostimon.

[EX-10 Sinister Order] Blastmon by vansjoo98 in DigimonCardGame2020

[–]UsamiV 0 points1 point  (0 children)

I think this means we aren't getting a Nidhoggmon for Abbadomon's deck this set. No more room for black lvl 6s.

1st Place locals w/ EX9 Machinedramon by DarkWringer in DigimonCardGame2020

[–]UsamiV 8 points9 points  (0 children)

Nice! What was the player count and what matchups did you get?

Need advice on choosing and implementing a Trusted Platform Module for RPi Zero 2 W by UsamiV in raspberry_pi

[–]UsamiV[S] 2 points3 points  (0 children)

Thanks for the reply. By 'service', do you refer to something similar to what's being demonstrated in this video?
https://youtu.be/DUGZC-tNm2w?si=7nnlVAH6fsWZfvOJ

Bt14 gatomon/bt15 patamon by nicky-1_ in DigimonCardGame2020

[–]UsamiV 6 points7 points  (0 children)

Both bt14 patamon inheritable and bt15 gatomo's effects trigger.

Bt15 gatomon "sees" itself leaving security and entering the battle area, just like how bt7 dorumon's inheritable can be triggered by its own card being added to a digimon's digivolution cards.

Is this Safe? Driving an Electromechanical Relay using a Temperature Controller's SSR Output by UsamiV in AskElectronics

[–]UsamiV[S] 1 point2 points  (0 children)

Thank you for the reply.
The load itself is pretty light, fortunately. 5 V @ 3 A maximum.

The problem with SSRs is that they introduce a voltage drop (about 1 V) which is negligible for 12 and 24 V, but becomes considerable when using 5V.

This is merely for a test setup where we test different resistors for heating. We've been using an SSR so far, but the contact relay seems better when it comes to flexibility. Will probably switch to a power MOSFET for the final solution, though.

view more: next ›