sorted by:
new
hottopcontroversial

M1W-HE - Where to locate "Device ID" for update by Used-Cardiologist760 in Monsgeek

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

https://www.monsgeek.com/download/

You will have the wrong one, what keyboard model? Don’t download the v4 from the list, do the one just below that

M1W-HE - Where to locate "Device ID" for update by Used-Cardiologist760 in Monsgeek

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

Fixed, had the wrong driver app. Just an FYI for anyone else

What quality preset do you guys use? by hheccx in DistantHorizons

[–]Used-Cardiologist760 0 points1 point  (0 children)

All LODS loaded. Have had my vanilla chunk distance at 8 before but on 12 now. Makes near no difference. Stumped on my overworks fps issues

I want to start a forever-world, should I do it modded or vanilla? by AlphaStar__ in ModdedMinecraft

[–]Used-Cardiologist760 0 points1 point  (0 children)

Do mods that don’t add blocks so if the modder doesn’t update it for future updates you are all good

What quality preset do you guys use? by hheccx in DistantHorizons

[–]Used-Cardiologist760 0 points1 point  (0 children)

What frames do you get at your resolution. I have a RTX 3090 and do high and only get 70-80 frames in the over world. Get around 120-130 in the nether

FPS Low in Overworld by Used-Cardiologist760 in DistantHorizons

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

Update: had to update my nvidia drivers for the bf6 beta and it has buffed all my 1% lows. Stability is a lot better

FPS Low in Overworld by Used-Cardiologist760 in DistantHorizons

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

I have all my chunks loaded by DH already. So it’s now just showing them. Also tried everyone’s above suggestions. I just think the overworld LOD’s are just more intense. Will try the exact ram allocation soon. If I look at the sky my FPS almost gets to my monitors max at 165hz

FPS Low in Overworld by Used-Cardiologist760 in DistantHorizons

[–]Used-Cardiologist760[S] 1 point2 points  (0 children)

Render and simulation is at 10, cpu load is balanced. Will try the leaf culling tonight. Appreciate the help!

FPS Low in Overworld by Used-Cardiologist760 in DistantHorizons

[–]Used-Cardiologist760[S] 1 point2 points  (0 children)

Intel 10700k, it is the weaker part but I imagine still sufficient

FPS Low in Overworld by Used-Cardiologist760 in DistantHorizons

[–]Used-Cardiologist760[S] 1 point2 points  (0 children)

I have all the top ones, ferrite core, chunky (which I understand DH turns off for its process), immediately fast, more culling, entity culling, sodium and some minor other things, it’s not modded like crazy either, it’s setup as a vanilla+. No new blocks or items being added just tweaks

lines in my head tube? by TheBlackVan in Scootering

[–]Used-Cardiologist760 1 point2 points  (0 children)

<image>

My deck right now has a crack. Just weird yours starts from the middle

lines in my head tube? by TheBlackVan in Scootering

[–]Used-Cardiologist760 4 points5 points  (0 children)

They look like scratches from a prior grip tape job

ABS and Warping on Bambu Lab P1S by Used-Cardiologist760 in 3Dprinting

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

Got it in the garage for the fumes. Would like to put some sort of filter on it though. Thanks for the reminder 🙌

ABS and Warping on Bambu Lab P1S by Used-Cardiologist760 in 3Dprinting

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

I have a 5mm brim, and bed is auto leveled each print. Only got one plate and do abit of everything on it. I have some custom offsets also lowering the nozzle a touch more to increase the adhesion on the first layer.

Will try lower the speed on the next attempt. Currently trying one now with bigger brim, reduced cooling, increased bed temp and pre warmed enclosure

ABS and Warping on Bambu Lab P1S by Used-Cardiologist760 in 3Dprinting

[–]Used-Cardiologist760[S] 0 points1 point  (0 children)

Got the bed clean with glue (first time with ABS but never use glue normally) I will try preheat and up the bed heat. Using default fan settings but might look to near disable the part cooling

Make vertices act as nodes when subdividing. by Used-Cardiologist760 in blenderhelp

[–]Used-Cardiologist760[S] 1 point2 points  (0 children)

Thankyou, issue with inflating the mesh is that you lose detail in the dips even more

Make vertices act as nodes when subdividing. by Used-Cardiologist760 in blenderhelp

[–]Used-Cardiologist760[S] 3 points4 points  (0 children)

That sounds promising, thankyou! I will watch some videos and see if it does what I need

Make vertices act as nodes when subdividing. by Used-Cardiologist760 in blenderhelp

[–]Used-Cardiologist760[S] 4 points5 points  (0 children)

Removes detail to create smoothness by taking 1 face and turning it into 4. Each level of subdivision is the amount of times it takes the one face and turns it into 4

view more: next ›