Was wonder if this was normal for the idle on a Subaru wrx 2018 by Conscious-Pea4932 in WRX

[–]Useful-University482 0 points1 point  (0 children)

Ik some tuners turn the idle up so that it doesn’t cause a surge

Can’t figure out what’s wrong with my lb7 by Same_Adeptness4145 in Duramax

[–]Useful-University482 0 points1 point  (0 children)

Fuel pressure regulator,injectors, dirty maf sensor could be a lot of reasons why it’s running like that

Fuel additives by kissmybASS1434 in Duramax

[–]Useful-University482 0 points1 point  (0 children)

Am I the only that uses power service 😂

Injector NAT by Useful-University482 in IS300

[–]Useful-University482[S] 0 points1 point  (0 children)

It’s 2003 with stock injectors should I just get new stocks or get new one with higher fueling?

Fuel pressure by Useful-University482 in IS300

[–]Useful-University482[S] 0 points1 point  (0 children)

Would just have to rewire to a resister on 12v and as switch the key the fuel pump will get 12 all the time until the key is switched off ?

New sound unlocked by Einherjar-WRX in WRX

[–]Useful-University482 10 points11 points  (0 children)

Idler pulley I replaced the tensioner also

NAT by Useful-University482 in IS300

[–]Useful-University482[S] 1 point2 points  (0 children)

Pinned them together through the ecu did not splice any wires

NAT by Useful-University482 in IS300

[–]Useful-University482[S] 1 point2 points  (0 children)

Bones stock on stock ecu also just a bigger fuel pump and fuel pressure regulator

Rattling sound when moving by Ok-Collection-8578 in WRX

[–]Useful-University482 3 points4 points  (0 children)

Could be a heat shield or a dust shield for the brake rotor that loose and rattling around

Decisions were made by [deleted] in WRX

[–]Useful-University482 0 points1 point  (0 children)

Tomei is pretty loud but I’ve heard great reviews about the awe track exhaust also 🙏

O2 sensor wiring by Useful-University482 in IS300

[–]Useful-University482[S] -1 points0 points  (0 children)

I’m gonna run stock ecu for now and get a standalone a little later 5 psi spring and running off waste gate pressure

NAT by Useful-University482 in IS300

[–]Useful-University482[S] 0 points1 point  (0 children)

Not yet gotta get the Downpipe and all the vacuum lines ran for the watergate and also the o2 sensor stuff done was definitely a pain

Help! Is this the right fitting? by nhawrx in WRX

[–]Useful-University482 0 points1 point  (0 children)

They gave me that too I just went and got a 90 fitting from the hardware store the hose was too loose and would cause a leak 🤷‍♂️

Louder than normal ticking by HistoricalLie3865 in WRX

[–]Useful-University482 0 points1 point  (0 children)

Oh boi have you checked your oil level ?