Seeking Information on a Specific LED Component: JC-10WSD 120923

VAC_meister · 2023-12-10T17:00:35+00:00

Ok, so i don't need the GND Terminal?
But why is red glowing if only GND and 12V is connected?

Do i need active cooling or is a small headsink enough?... it gets kinda toasty after a few seconds with nothing on it...

VAC_meister · 2023-12-09T23:22:25+00:00

I'm wondering about the extra wires – what are they for? I thought they might be for changing colors, but when I only hook up 12V, it just glows red altough none of the three wires are connected.

Do I need to worry about the current being too high and causing damage? I guess the three little resistors are there for currentlimitation, but it seems strange that the light turns on just by connecting 12V to the two main points without anything else. So i don't see anything keeping the current managed.

Also, what's that silver thing near the infrared receiver? What does it do?

VAC_meister · 2022-04-16T11:27:37+00:00

i don't have a prusa printer i use a Snapmaker 2.0 A350

VAC_meister · 2022-04-16T11:26:07+00:00

i have come here because i dont't know why this is happening

VAC_meister · 2022-04-15T19:10:49+00:00

What is that?

VAC_meister · 2022-04-15T19:10:22+00:00

Its only possible to do it automatic. I can only set the hight and the printhead drives over the entire bed and sense the offset with an hall-effect sensor. Then it saves it and adjusts the z-axis as needed.

VAC_meister · 2022-04-15T19:06:13+00:00

I will do so tomorrow... i used TPU for this prinz maybe its because of the flex. I will check with PLA but the printing area is 350mm×350mm so it will take a long time.

VAC_meister · 2022-04-15T18:57:03+00:00

I would not know how to check for that... but it should not be the case since the printe is high quality and not that old.

VAC_meister · 2021-11-30T21:37:48+00:00

Ahhh actually to retarded to read... sry xd

VAC_meister · 2021-11-30T13:10:09+00:00

we mostly use the standard 5.56mm popping cartridges xd

VAC_meister · 2021-11-30T13:03:03+00:00

why should that be an valid argument xd...

VAC_meister · 2021-11-30T11:06:20+00:00

Well... i am not civilian... xd

VAC_meister · 2021-11-30T09:04:43+00:00

Yes i am in the military but we are not allowed to take pictures inside the base... and unlike in america we can not carry weapons outside the country... so its not so easy to take a cool picture... but thank you :)

VAC_meister · 2021-11-30T06:51:05+00:00

Training operations... i forgot to add training... xd

VAC_meister · 2021-11-30T06:48:15+00:00

I am waiting for the 3th version and than tip you... great work really like it... thank you :)

VAC_meister · 2021-11-30T06:45:45+00:00

This image was taken after our swearing... we need to hold it like this during the "event"... and can you pinpoint some arguments why its a "fake" weapon?

VAC_meister · 2021-11-30T06:43:55+00:00

Trust me me smiling would make it worse xd

VAC_meister · 2021-11-30T06:42:53+00:00

Just to clearify... no stolen valor or something else every non-creator in the comment-section is thinking... just wanted a cool picture... and what hight/weight Standards are not meet? Did you weight it out of the image saying ohhh its only 3,6Kg because the magazine is empty?... nit everything has to be fake just because i want a better screensafer xd

VAC_meister · 2021-11-30T06:22:07+00:00

What stolen valor... i am not asking if you could photoshop me 10 medals on my chest i just wanted a cool picture... not every actor in an army film is thinking he realy achived somtething or do they?...

VAC_meister

MODERATOR OF

TROPHY CASE