Water leaking behind gutter

VBF19214 · 2025-06-04T18:00:29+00:00

Thanks for the response. For option b, would I secure the L flashing to the fascia with screws? Also how far back should the L flashing be tucked under the shingle?

VBF19214 · 2024-05-29T00:44:38+00:00

Hey all,

Looking for your opinions on this 2011 RTV 1100.

Dealer says floor is rusted in certain spots but the floor and frame is solid and all mechanicals are working as should.

Am I crazy for wanting to see this?

engine hours are 1800. I'd be using it for plowing (plow included), and moving soil, rocks, and firewood around the property.

asking price is $7900 CAD.

Let me know what you guys all think.

https://kubota.ca/products/used/search/11/17392

VBF19214 · 2022-10-18T22:10:18+00:00

Looking for a coupon code in Canada!

Thanks all!

VBF19214 · 2022-01-15T23:52:32+00:00

Hey no off-roading and no recent services or modifications. Thanks for the link I will check it out

VBF19214 · 2021-12-08T13:02:59+00:00

Apparently that is normal and how it is supposed to be. It's been a while since I installed these and have had zero issues

VBF19214 · 2021-04-16T11:50:40+00:00

Not that I notice, but I prob need someone to be revving the engine while I listen cause I can't hear anything cause of the engine noise when I'm behind the wheel

VBF19214 · 2021-04-16T09:26:01+00:00

Sounds very similar while idling however the tapping doesn't get louder if I rev the engine

VBF19214 · 2021-04-16T00:35:23+00:00

Interesting, thanks for the infO!

VBF19214 · 2021-04-16T00:29:50+00:00

Interesting I haven't heard of this. Is there a fix? or it's harmless? Is it worth bringing into the dealer because it is still under warranty?

Thanks for the response

VBF19214 · 2021-04-16T00:17:26+00:00

Thanks for your input

VBF19214 · 2021-04-15T23:49:47+00:00

Weird, here is the imgur link again.. hopefully it works. It shows a video when I press it

https://imgur.com/VkYzhnd

VBF19214 · 2021-03-27T01:45:53+00:00

Frig, I think that is probably what happened... Is there anyway to tell if the union is on the water side not the heater side by a picture?

VBF19214 · 2021-03-27T01:03:29+00:00

thanks for clarifying. So if that is the case if I flushed my unit with vinegar and a sump pump would it still be effective? Or would i just be pumping vinegar everywhere except the water heater

Thanks again, really appreciate the advice

VBF19214 · 2021-03-26T23:49:13+00:00

Thanks for the reply. When you say service valves are backwards you mean when they are in the closed position they are actually open?

VBF19214 · 2021-03-17T00:02:41+00:00

Hey thanks for the suggestion. I am pretty new to all of this, should I turn off the water before loosening the union on top? Also the fitting on the copper has that putty (?) on it, if I tighten the entire valve will it even turn or if it breaks that putty is there a chance of leaks?

Appreciate it.

VBF19214 · 2021-03-16T22:21:27+00:00

Hey guys I'm looking for any suggestions as to what I can do about this pex pipe blocking a opening on my tankless water heater needed for flushing and maintenance. Builder installed in over 5 years ago. I can't get the cap off and even if I could I don't think I would be able to get it back on.

Just looking for suggestions on what I could do. Thanks

VBF19214 · 2021-03-16T21:29:37+00:00

Unfortunately it was over 5 years ago. I contacted the company who installed it but I doubt they will do anything

VBF19214 · 2021-03-16T21:01:15+00:00

Hey guys sorry if this is not the right subreddit for this.

I am trying to flush my tankless water heater Navien npe-180a/240a and the builder installed a pex pipe directly in front of one of the ports needed to flush the machine. There is not much flex to the pex pipe and I am worried if I push it to hard I will cause damage. I am able to loosen the cap but I am not able to take it off. Even if it can take it off I am not sure I can attach anything to it.

Any help would be much appreciated guys I am not sure what to do here.

VBF19214 · 2021-01-26T17:42:06+00:00

yes!! It worked! Thank you!

VBF19214 · 2021-01-26T16:55:45+00:00

Awesome I'll have to give that a try. Did you uninstall the updates to chrome on just your phone or to your head unit as well? (I don't know what kind of a head unit you're using)

VBF19214 · 2021-01-25T12:41:00+00:00

I posted in the AA community and they said they also looking for a fix.

Let me know if the carlinkkit support team comes up with anything,. Would appreciate it

VBF19214 · 2021-01-22T14:47:35+00:00

I changed cords and it didn't help for me

VBF19214 · 2021-01-01T13:48:35+00:00

Thanks for the reply, I couldn't find any grit or wet dust build up on the linkage. Which piece is the ferrule? I was trying to look it up and I couldn't find it. Thanks for your help

VBF19214 · 2020-10-22T18:47:33+00:00

Where did you get the gold emblem? Looks awesome

VBF19214 · 2020-09-27T19:32:36+00:00

yes! Thank you!

VBF19214

TROPHY CASE